Bulletin PD-20888 12/04 8ETL06PbF 8ETL06FPPbF Ultra-low VF Hyperfast Rectifier for Discontinuous Mode PFC Features * * * * * * * Benchmark Ultra-low Forward Voltage Drop Hyperfast Recovery Time Low Leakage Current 175C Operating Junction Temperature Fully Isolated package (VINS = 2500 VRMS) UL E78996 approved Lead-Free ("PbF" suffix) VF = 0.96V typ. IF(AV) = 8Amp VR = 600V Description State of the art, ultra-low VF, soft-switching Hyperfast Rectifiers optimized for Discontinuous (Critical) Mode (DCM) Power Factor Correction (PFC). The minimised conduction loss, optimized stored charge and low recovery current minimize the switching losses and reduce over dissipation in the switching element and snubbers. The device is also intended for use as a free wheeling diode in power supplies and other power switching applications. Applications AC-DC SMPS 70W-400W e.g. Laptop & Printer AC Adaptors, Desktop PC, TV & Monitor, Games units and DVD AC-DC power supplies. Absolute Maximum Ratings Parameters VRRM Peak Repetitive Reverse Voltage IF(AV) Average Rectified Forward Current @ TC = 160C Max Units 600 V 8 A @ TC = 142C (FULLPACK) IFSM Non Repetitive Peak Surge Current @ TJ = 25C IFM Peak Repetitive Forward Current TJ, TSTG Operating Junction and Storage Temperatures 175 16 - 65 to 175 C Case Styles 8ETL06PbF 8ETL06FPPbF Base Cathode 2 1 Cathode 1 Cathode 3 Anode TO-220AC www.irf.com 3 Anode TO-220 FULLPACK 1 8ETL06PbF, 8ETL06FPPbF Bulletin PD-20888 12/04 Electrical Characteristics @ TJ = 25C (unless otherwise specified) Parameters VBR, Vr Breakdown Voltage, Blocking Voltage VF Forward Voltage IR Min Typ Max Units Test Conditions 600 Reverse Leakage Current - - V IR = 100A - 0.96 1.05 V IF = 8A, TJ = 25C - 0.81 0.86 V IF = 8A, TJ = 150C - 0.05 5 A VR = VR Rated - 20 100 A TJ = 150C, VR = VR Rated CT Junction Capacitance - 17 - pF VR = 600V LS Series Inductance - 8.0 - nH Measured lead to lead 5mm from package body Dynamic Recovery Characteristics @ TC = 25C (unless otherwise specified) Parameters trr Min Typ Max Units Test Conditions Reverse Recovery Time IRRM Qrr Peak Recovery Current Reverse Recovery Charge - 60 100 - 150 250 - 170 - - 250 - - 15 - - 20 - - 1.3 - - 2.6 - ns IF = 1A, diF/dt = 100A/s, VR = 30V IF = 8A, diF/dt = 100A/s, VR = 30V TJ = 25C TJ = 125C A IF = 8A TJ = 25C diF /dt = 200A/s VR = 390V TJ = 125C C TJ = 25C TJ = 125C Thermal - Mechanical Characteristics Parameters Min Typ Max Units C TJ Max. Junction Temperature Range - - 175 TStg Max. Storage Temperature Range - 65 - 175 RthJC Thermal Resistance, Junction to Case Per Leg - 1.4 2 Fullpack (Per Leg) - 3.4 4.3 - - 70 0.5 - RthJA Thermal Resistance, Junction to Ambient RthCS Thermal Resistance, Case to Heatsink - Weight - 2.0 - g - 0.07 - (oz) 6.0 - 12 Kg-cm 5.0 - 10 lbf.in Mounting Torque Per Leg C/W Typical Socket Mount Mounting Surface, Flat, Smooth and Greased 2 www.irf.com 8ETL06PbF, 8ETL06FPPbF Bulletin PD-20888 12/04 100 100 Tj = 175C Reverse Current - I R (A) 10 125C 100C 1 75C 0.1 50C 0.01 25C 0.001 100 T = 175C J 200 300 400 500 600 Reverse Voltage - VR (V) T = 150C J Fig. 2 - Typical Values Of Reverse Current Vs. Reverse Voltage T = 25C J 100 T J = 25C Junction Capacitance - C T (pF) Instantaneous Forward Current - I F (A) 150C 10 1 10 0.1 0.4 0.8 1.2 1.6 0 2 100 200 300 400 500 600 Reverse Voltage - VR (V) Forward Voltage Drop - VFM (V) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage Fig. 1 - Typical Forward Voltage Drop Characteristics Thermal Impedance Z thJC (C/W) 10 1 0.1 D = 0.50 D = 0.20 D = 0.10 D = 0.05 D = 0.02 D = 0.01 t1 t2 Single Pulse (Thermal Resistance) Notes: 1. Duty factor D = t1/ t2 2. Peak Tj = Pdm x ZthJC + Tc 0.01 0.00001 www.irf.com PDM 0.0001 0.001 0.01 0.1 t1, Rectangular Pulse Duration (Seconds) Fig. 4 - Max. Thermal Impedance Z thJC Characteristics 1 3 8ETL06PbF, 8ETL06FPPbF Bulletin PD-20888 12/04 Thermal Impedance Z thJC (C/W) 10 D = 0.50 D = 0.20 D = 0.10 D = 0.05 D = 0.02 D = 0.01 1 0.1 PDM t1 t2 Single Pulse (Thermal Resistance) Notes: 1. Duty factor D = t1/ t2 2. Peak Tj = Pdm x ZthJC + Tc 0.01 0.00001 0.0001 0.001 0.01 0.1 1 10 100 t1, Rectangular Pulse Duration (Seconds) Fig. 5 - Max. Thermal Impedance Z thJC Characteristics (FULLPACK) 180 Allowable Case Temperature (C) Allowable Case Temperature (C) 180 175 170 165 DC 160 Square wave (D = 0.50) Rated Vr applied 155 see note (3) 160 DC 140 120 Square wave (D = 0.50) Rated Vr applied 100 see note (3) 80 150 0 2 4 6 8 10 12 14 Average Forward Current - IF(AV) (A) Fig. 6 - Max. Allowable Case Temperature Vs. Average Forward Current 0 2 4 6 8 10 12 14 Average Forward Current - IF(AV) (A) Fig. 7 - Max. Allowable Case Temperature Vs. Average Forward Current (FULLPACK) Average Power Loss ( Watts ) 12 10 8 DC 6 D = 0.01 D = 0.02 D = 0.05 D = 0.1 D = 0.2 D = 0.5 RMS Limit 4 2 (3) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 8); PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = rated VR 0 0 2 4 6 8 10 12 Average Forward Current - IF(AV) (A) Fig. 8 - Forward Power Loss Characteristics 4 www.irf.com 8ETL06PbF, 8ETL06FPPbF Bulletin PD-20888 12/04 5000 450 IF = 16 A IF = 8 A 4500 350 4000 300 3500 Qrr ( nC ) trr ( ns ) 400 250 200 3000 2500 150 2000 100 1500 50 IF = 16 A IF = 8 A 1000 V R = 390V T J = 125C T J = 25C 0 100 V R = 390V T J = 125C T J = 25C 500 100 1000 1000 di F /dt (A/s ) di F /dt (A/s ) Fig. 9 - Typical Reverse Recovery vs. di F /dt Fig. 10 - Typical Stored Charge vs. di F /dt Reverse Recovery Circuit VR = 200V 0.01 L = 70H D.U.T. diF /dt dif/dt ADJUST D G IRFP250 S Fig. 11- Reverse Recovery Parameter Test Circuit www.irf.com 5 8ETL06PbF, 8ETL06FPPbF Bulletin PD-20888 12/04 3 t rr IF tb ta 0 Q rr 2 I RRM 4 0.5 I RRM di(rec)M/dt 5 0.75 I RRM 1 diFf /dt 1. diF/dt - Rate of change of current through zero crossing 2. IRRM - Peak reverse recovery current 3. trr - Reverse recovery time measured from zero crossing point of negative going IF to point where a line passing through 0.75 IRRM and 0.50 IRRM extrapolated to zero current 4. Qrr - Area under curve defined by t rr and IRRM t rr x I RRM Q rr = 2 5. di (rec) M / dt - Peak rate of change of current during t b portion of t rr Fig. 12 - Reverse Recovery Waveform and Definitions Outline Table 10.54 (0.41) MAX. 1.32 (0.05) 3.78 (0.15) 3.54 (0.14) 2.92 (0.11) 2.54 (0.10) TERM 2 15.24 (0.60) 14.84 (0.58) 1 1.22 (0.05) DIA. Base Cathode 2 6.48 (0.25) 6.23 (0.24) 3 2 1 14.09 (0.55) 3.96 (0.16) 13.47 (0.53) 3.55 (0.14) Cathode 3 Anode 0.10 (0.004) 2.04 (0.080) MAX. 1.40 (0.05) 2.89 (0.11) 1.15 (0.04) 0.94 (0.04) 2.64 (0.10) 0.69 (0.03) 1 4.57 (0.18) 3 0.61 (0.02) MAX. 4.32 (0.17) 5.08 (0.20) REF. 6 Conforms to JEDEC Outline TO-220AC Dimensions in millimeters and (inches) www.irf.com 8ETL06PbF, 8ETL06FPPbF Bulletin PD-20888 12/04 Outline Table 10.6 HOLE o 3.4 10.4 3.1 3.2 1 Cathode 3 Anode 15.8 16.0 15.4 16.4 7.1 6.7 3.7 2.8 2.6 13.7 2.54 TYP. 0.9 0.7 2.54 TYP. 0.48 0.44 2.85 2.65 1.15 1.4 1.05 13.5 3.3 3.1 10 TYP 1.3 R0.7 (2 PLACES) 4.8 4.6 R0.5 Conforms to JEDEC Outline TO-220 FULLPACK Dimensions in millimeters and (inches) 5 0.5 5 0.5 Part Marking Information (TO-220) IRXC Assembly Line EXAMPLE: THIS IS A 8ETL06 LOT CODE 1789 ASSEMBLED ON WW 19, 2001 IN THE ASSEMBLY LINE "C" PART NUMBER INTERNATIONAL RECTIFIER LOGO DATE CODE ASSEMBLY LOT CODE IRMX Assembly Line EXAMPLE: THIS IS A 8ETL06 LOT CODE 1789 ASSEMBLED ON WW 19, 2001 IN THE ASSEMBLY LINE "C" www.irf.com P = LEAD-FREE YEAR 1 = 2001 WEEK 19 LINE C PART NUMBER INTERNATIONAL RECTIFIER LOGO DATE CODE ASSEMBLY LOT CODE YEAR 1 = 2001 WEEK 19 P = LEAD-FREE 7 8ETL06PbF, 8ETL06FPPbF Bulletin PD-20888 12/04 Part Marking Information (TO-220 FULL-PAK) EXAMPLE: THIS IS A 8ETL06FP PART NUMBER FP = Fullpack INTERNATIONAL RECTIFIER LOGO LOT CODE 1789 ASSEMBLED ON WW 19, 2002 IN THE ASSEMBLY LINE "C" DATE CODE YEAR = 2002 WEEK 19 P = Lead-Free ASSEMBLY LOT CODE Ordering Information Table Device Code 8 E T L 06 FP PbF 1 2 3 4 5 6 7 1 - Current Rating (8 = 8A) 2 - E = Single Diode 3 - T = TO-220, D2Pak 4 - L = Ultra-low VF HyperFast Recovery 5 - Voltage Rating (06 = 600V) 6 - none = TO-220AC FP 7 - = TO-220 FULLPACK none = Standard Production PbF = Lead-Free Tube Standard Pack Quantity: 50 pieces Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level and Lead-Free. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 12/04 8 www.irf.com