Surface Mount Zener Diode Features: * * * SOD-323 Planar Die Construction General Purpose, Medium Current Ideally Suited for Automated Assembly Processes Applications: * * Zener diode Ultra-small surface mount package Maximum Ratings: Ratings at 25C unless otherwise specified. Characteristic Symbol Value Unit Forward voltage at IF=10mA VF 0.9 V Power dissipation Pd 200 mW Thermal resistance, junction to ambient air RjA 625 C/W Tj, Tstg -65 to +150 C Junction and storage temperature range Note: Valid provided that device terminals are kept at ambient temperature Short duration test pulse used in minimize self-heating effect f = 1kHz www.element14.com www.farnell.com www.newark.com Page <1> 25/02/13 V1.0 Surface Mount Zener Diode Electrical Characteristics: Ratings at 25C unless otherwise specified. Part Number Marking Code VZ@IZT Nom(V) BZT52C15S-7-F WJ 15 IZT 15.6 Temperature Coefficient of zener voltage @ IZTC mV/C ZZT@IZT ZZK@IZK IZK IR @VR mA A V Min. Max. 1 0.1 10.5 9.2 13 Min(V) Max(V) mA 13.8 Max. Reverse Current Max. Zener Impedance Zener Voltage Range 5 30 200 Note: Valid provided that device terminals are kept at ambient temperature Tested with pulses, period=5ms, pulse width = 300s f = 1kHz Typical Characteristics: Ta = 25C unless otherwise specified. www.element14.com www.farnell.com www.newark.com Page <2> 25/02/13 V1.0 Surface Mount Zener Diode Package Outline: Plastic surface mounted package SOD-323 Dim. Min. Max. A 1.275 1.325 B 1.675 1.725 C 0.9 Typ. D 0.25 0.35 E 0.27 0.37 H 0.02 0.1 J K 0.1 Typ. 2.6 2.7 Dimensions : Millimetres www.element14.com www.farnell.com www.newark.com Page <3> 25/02/13 V1.0 Surface Mount Zener Diode Soldering Footprint: Dimensions : Millimetres Package Information: Device Package Shipping BZT52C15S-7-F SOD-323 3,000 / Tape & Reel Part Number Table Description Part Number Surface Mount Zener Diode BZT52C15S-7-F Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. (c) Premier Farnell plc 2012. www.element14.com www.farnell.com www.newark.com Page <4> 25/02/13 V1.0