* RATINGS Resistance Range And Tolerance Type (Size) RMC 16S, 16, 10, 18, 14, 12, 01 Rugged and easy to use, Kamaya thick film chip resistors are suitable for a wide range of soldering methods and are ideal for use with high-speed automatic insertion machinery. They are best suited for commercial, industrial and automotive applications. Rated Maximum Power Working @ 70C Voltage W V RMC 16S (0402) 0.063 50 100 RMC 16 (0603) 0.063 50 100 150 300 200 400 RMC 10 0.10 (0805) * RMC 18 (1206) FEATURES 1. A wide range of values and power ratings for design flexibility. 3. Thick film Ruthenium Oxide element for excellent stability. 2. Excellent solderability for all soldering methods due to superior termination composition/construction. 4. Operating temperatures range from -55 to 125C. * * Resistance is marked on 0603 and larger sizes by three digits for 2% and 5% tolerances. 0805 and larger components are marked with four digits for 1% tolerance. Middle Electrode: Ni Inner Electrode: Ag/Pd Unit = mm RMC 16S (0402) RMC 16 (0603) RMC 10 (0805) RMC 18 (1206) RMC 14 (1210) RMC 12 (2010) RMC 01 (2512) 1.0 0.05 0.5 0.05 0.35 0.05 0.20 0.1 0.25 0.05 0.1 0.6 mg 1.6 0.1 0.8 0.1 0.05 0.45 0.1 0.3 0.1 0.3 0.1 2 mg 2.0 0.1 1.25 0.1 0.55 0.1 0.4 0.2 0.4 0.2 5 mg 3.2 0.15 1.6 0.15 0.55 0.1 0.5 0.25 0.5 0.25 9 mg 3.2 0.15 2.5 0.15 0.55 0.15 0.5 0.25 0.5 0.25 16 mg 5.0 0.15 2.5 0.15 0.55 0.15 0.6 0.2 0.6 0.2 25 mg 6.3 0.15 3.2 0.15 0.55 0.15 0.6 0.2 0.6 0.2 40 mg Dimension L W H 1 2 Unit Weight 4 0.25 RMC 14 (1210) 0.25 200 400 RMC 12 (2010) 0.50 200 400 200 400 1.0 Kamaya Inc. * Phone: 219-489-1533 * Fax: 219-489-2261 * www.kamaya.com 1% (F) E96 Series 2% (G) E24 Series 100 100 to 1 M 200 10 to 97.6 -- + 500/- 200 100 100 to 1 M 200 10 to 97.6 -- + 500/- 200 100 10 to 1 M 200 1.02 M to 10 M -- + 500/- 200 100 10 to 1 M 200 1.02 M to 10 M + 500/- 200 1 to 9.76 100 10 to 1 M -- 200 -- + 500/- 200 100 10 to 1 M -- 200 -- + 500/- 200 100 10 to 1 M -- 200 -- + 500/- 200 5% (J) E24 Series -- -- 10 to 1 M 10 to 5.6 M -- 1 to 9.1 -- -- 10 to 1 M 10 to 10 M -- 1 to 9.1 -- -- 10 to 10 M 10 to 22 M 1 to 9.1 1 to 9.1 -- -- 10 to 10 M 10 to 22 M 1 to 9.1 1 to 9.1 -- -- 10 to 1 M 10 to 20 M -- 1 to 9.1 -- -- 10 to 1 M 10 to 20 M -- 1 to 9.1 -- -- 10 to 1 M 10 to 20 M -- 1 to 9.1 1) T.C.R. less than 100 ppm and resistance tolerances less than 1% available in RGC and RNC series. 2) Resistance values less than 1.0 available in RLC series. 3) For use as jumper, RMC 16S and RMC 16 rated at 1.0 amp maximum, all others 2 amps maximum. Maximum DCR of 50 m. 4) RMC 10 can be operated up to 1/8 watt @ 70C and RMC 18 can be operated up to 1/4 watt @ 70C provided the surface temperature of the resistor does not exceed 125C. PERFORMANCE CHARACTERISTICS DESCRIPTION PERFORMANCE Resistance Temperature Coefficient Outer Electrode: Sn/Pb Type (Size) 0.125 Resistance Temp. Coefficient ppm/C 0.125 RMC 01 (2512) DIMENSIONS AND STRUCTURE Maximum Overload Voltage V TEST METHOD JIS C5202 As specified in table section 5.2 Measuring temperature +25C/-55C/+25C/+125C Short-time Overload 1.0% maximum section 5.5 Rated voltage x2.5, 5 seconds Terminal Strength 1.0% maximum section 6.1.4 Install a sample on the board and bend board 5/45mm for 10 seconds (1/2 and 1 are 3/45mm) Solder-Heat Resistance 1.0% maximum section 6.10 Dip into 260C solder bath for 10 seconds section 6.11 After dipping into flux dip into 235C solder bath for 2 seconds Solderability 95% minimum coverage Temperature Cycle 1.0% maximum section 7.4 Cycle between -55C and + 125C for 5 cycles Load Life in Moisture 2.0% maximum section 7.9 Rated voltage 1.5 hours "ON" 0.5 hours "OFF" 40C 95%RH 1,000 Hours Load Life 2.0% maximum section 7.10 Rated voltage 1.5 hours "ON" 0.5 hours "OFF" 70C. 1,000 Hours * PART NUMBER SYSTEM RMC Product Type RMC = Thick Film Chip Resistor 10 Wattage (size) 16S = 1/16 watt (0402) 16 = 1/16 watt (0603) 10 = 1/10 watt (0805) 18 = 1/8 watt (1206) 14 = 1/4 watt (1210) 12 = 1/2 watt (2010) 01 = 1.0 watt (2512) - XXX or XXXX Resistance Value 2 significant digits plus multiplier 102 = 1.0 K 1R0 = 1.0 "000" for jumper J Tolerance F = 1% G = 2% J = 5% 3 significant digits plus multiplier for 1% tolerance 1002 = 10.0 K 10R0 = 10.0 T Packaging B = Bulk T = Tape and Reel (paper) TP = Tape and Reel (plastic) TH = Tape and Reel (paper, 2 mm pitch) (0402) BA = Bulk Cartridge Kamaya Inc. * Phone: 219-489-1533 * Fax: 219-489-2261 * www.kamaya.com 5