3
ECL Pro™
SY100EPT23L
Micrel, Inc.
M9999-120505
hbwhelp@micrel.com or (408) 955-1690
TRUTH TABLE
D/D Q
LH L
HL H
Open Open L
Symbol Paramter Value Unit
VCC Power Supply Voltage –0.5 to +3.8 V
VIN PECL Input Voltage 0V to VCC +0.5 V
VOUT Voltage Applied to –0.5 to VCC V
Output at HIGH State
IOUT Current Applied to Twice the mA
Output at LOW State Rated IOL
TLead Lead Temperature +260 °C
(soldering, 20 sec.)
Tstore Storage Temperature –65 to +150 °C
TAOperating Temperature –40 to +85 °C
θJA (Still-air) SOIC 160 °C/W
(Still-air) MSOP 200 °C/W
θJC SOIC 39 °C/W
MSOP 39 °C/W
Note:
1. Permanent device damage may occur if absolute maximum ratings are
exceeded. This is a stress rating only and functional operation is not
implied at conditions other than those detailed in the operational sections
of this data sheet. Exposure to absolute maximum ratlng conditions for
extended periods may affect device reliability.
ABSOLUTE MAXIMUM RATINGS(1)
LVTTL DC ELECTRICAL CHARACTERISTICS
TA = –40°CTA = 0°CTA = +25°CTA = +85°C
Symbol Parameter Min. Max. Min. Max. Min. Max. Min. Max. Unit Condition
VOH Output HIGH Voltage(2) 2.3 — 2.3 — 2.3 — 2.3 — V IOH = –3.0mA
VOL Output LOW Voltage — 0.5 — 0.5 — 0.5 — 0.5 V IOL = 24mA
IOS Output Short Circuit Current –80 –240 –80 –240 –80 –240 –80 –240 mA VOUT = 0V
VCC = 3.3V, GND = 0V.
TA = –40°CTA = 0°CTA = +25°CTA = +85°C
Symbol Parameter Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Unit
ICC Power Supply Current — — 30 — — 30 — — 30 — — 30 mA
IIH Input HIGH Current — — 150 — — 150 — — 150 — — 150 µA
IIL Input LOW Current 0.5 — — 0.5 — — 0.5 — — 0.5 — — µA
VCMR Common Mode Range 1.5 — 3.3 1.5 — 3.3 1.5 — 3.3 1.5 — 3.3 V
VPP Minimum Peak-to-Peak
Input(1) 200 — — 200 — — 200 — — 200 — — mV
VIH Input HIGH Voltage(2) 2070 — 2420 2130 — 2460 2135 — 2490 2130 — 2565 mV
VIL Input LOW Voltage(2) 1350 — 1825 1350 — 1825 1350 — 1825 1350 — 1825 mV
Notes:
1. 200mV input guarantees full logic at output.
2. These values are for VCC = 3.3V. Level Specifications will vary 1:1 with VCC.
VCC = 3.3V, GND = 0V.
LVPECL DC ELECTRICAL CHARACTERISTICS