ARINC 600 BKAD/E/F
Low insertion force contacts.
Both environmental and non- environmental
versions.
Polarizing posts that are removable from the
mating face.
Field replaceable inserts for size 22 and
power contacts.
Up to 800 size 22 contacts in one connector.
Crimp, coax, power, printed circuit and wire
wrappable post style contacts.
Uses standard DPX crimp, insertion/extraction
tooling.
Waveguide connections available.
BKAD/E
BKAD/E connectors represent a major milestones in
presenting a new rack and panel connector for
support of the air transportation market.
Several important design concerns have been ad-
dressed and solved in this new series. High mating
forces of pluggable modules in a rack have been
reduced by approximately two-thirds.
The low insertion force contacts are also inter-
changeable with the contacts used in the DPX
series and permit retrofit of existing equipment.
BKAF
This new connector is totally intermateable and
intermountable with ARINC 600 connectors now in
the field.
The BKAF permits the user to easily replace a
contact in case of problems, rather than disas-
semble the entire connector--it is available with
size 22 contacts in wrap post or solder-tail ver-
sions. The system maintains the advantages of low
insertion force technology incorporated in all ARINC
600 connectors.
Rear Release/Rear Removable
Size 12, 16, 20, 22 Crimp Contacts Front Release/Front Removable
Size 22 Solder Tail and Wrap Post Contacts
Pos-Aline Connector Construction Feature
Material Specifications
In the ARINC 600 connector series, Size 22 con-
tacts are the only size that utilize this design
feature. The hooded socket extends from its in-
sulator while the pin contacts are shrouded by its
front insulator.
All other contacts used in this series employ stan-
dard contact design.
The result is that the complement of contacts for
the plug connectors will consist of pin contacts for
size 22 and socket contacts for all others. The
receptacle contacts will be just the reverse, socket
contact for size 22 and pin contacts for the
balance.
Shell & Waveguide
BKAD BKAE BKAF Specifications
Insulator
Contacts
Grommets/Seals
O-Ring
Finish
Material
Material
Material
Finish
Termination
Material
Material
1200
Alodine
Thermoset
Aluminum alloy
Copper alloy
Gold over Nickel
Crimp
N/A
N/A
1200
Alodine
Thermoset
Aluminum alloy
Copper alloy
Gold over Nickel
Crimp
Silicone-based Elastomer
Silicone-based Elastomer
1200
Alodine
Thermoset
Aluminum alloy
Copper alloy
Gold over Nickel
P.C./Wrap Post
N/A
N/A
MIL-C-5541
N/A
QQ A-591/A380
QQ-C-533
MIL-G-45204
N/A
N/A
N/A
www.ittcannon.com 2
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
* = For Polarizing Position greater then 99, add third digit.
www.ittcannon.com 3
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
ARINC 600 BKAD/E/F
CONNECTOR SERIES
CLASS
SHELL SIZE
CONNECTOR LAYOUT DESCRIPTION
SIZE 1 COAX INSERT MODIFIER
BOEING COAX MODIFIER
SHELL STYLE
CONNECTOR MOUNTING MODIFIER
POLARIZING POSITION
MODIFIER (Contact, Finish, Material)
How to Order
BKA D 2 A234 M * 3 00 01 * F0
CONNECTOR SERIES BOEING COAX MODIFIER
SHELL STYLE
CONNECTOR MOUNTING MODIFIER
CLASS Non-environmental (rear release, crimp
contacts)
Environmental (rear release, crimp con-
tacts)
Non-environmental (front release, solder
and wrap post #22 contact, rear release
all others)
Same as E, except uses BKAD shells, and
Less 0 rings on plug side.
Environmental (0-ring is used to seal
between connector shell and insulators)
with rear release, crimp contacts.
Non-environmental connector using fil-
tered contacts (reference Cannon Phoe-
nix)
Max. contact capacity - 125
Max. contact capacity - 400
Max. contact capacity - 800
Connector contains modified 71W1 or
2W2 insert (four MTG screw hole loca-
tions and coaxial contact used in this
insert are interchangeable between dif-
ferent manufacturers
Plug (rack side)
Receptacle (box side)
Standard design, .148 dia. holes
With #6-32 ESNA (#12 NCFMA2-62) clinch
nuts (see chart)
Size 1 receptacle only - less 3 printed circuit
board mounting lugs
With #4-40 ESNA (#22 NCFMA2-40) clinch
nuts (see chart)
Size 2 and 3 plug and receptacle only - with
#4-40 ESNA (#22 NCFMA2-40) clinch nuts
(all mounting holes)
Size 2 and 3 plug and receptacle only - with
#6-32 ESNA (#12 NCFMA2-62) clinch nuts
(all mounting holes)
Same as - 00 mounting modification except
with nickel finished shells .0008 - .0012 thick
with EMI grounding spring for plug shells and
supplied with non-environmental inserts.
Same as - 00 mounting modification except
with nickel finished shells .0008 - .0012 thick
with EMI grounding spring for plug shells and
supplied with environmental inserts not potted
into shell.
With floating eyelets (.048 min. radial float)
4 corner holes per connector.
Consult factory if other modifications are required
SHELL SIZE
CONNECTOR LAYOUT DESCRIPTION
SIZE 1 COAX INSERT MODIFIER
NOTE: A dash must be inserted whenever code does not apply.
D
BKA (Per ARINC 600)
E
F
C
S
T
3 -
4 -
00 -
01 -
02 -
03 -
08 -
09 -
16 -
17 -
23 -
M
1
2
3
(See page 4)
-
-
-
-
-
-
-
-
-
-
Boeing
Coax
Code
Connector
Size
1
2
3
4
4
8
4
6
10
Number of Clinch Nuts
Plug Receptacle
ITTC
Code Plug Connector Receptacle Connector
ITTC Coax Contacts Supplied
AA
AB
AC
AD
AE
AF
Blank
B
C
D
E
F
No Coax Supplied
349-0013-000
349-0015-000
349-0013-000
349-0017-000
349-0015-000
349-0018-000
349-0015-000
349-0017-000
No Coax Supplied
349-0014-000
349-0016-000
349-0014-000
349-0002-000
349-0016-000
349-0004-000
349-0016-000
349-0002-000
www.ittcannon.com 4
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
ARINC 600 BK AD/E/F
How to Order (Continued)
CONNECTOR LAYOUT DESCRIPTION
NOTE. ANY OTHER COMBINATION OF INSERTS WITHIN A SPECIFIC SHELL IS AVAILABLE UPON REQUEST
POLARIZING POSITION
MODIFIER (Contact, Finish, Material)
01 thru 99 (per ARINC 600)
Blank-Polarizing posts or keys not installed but
supplied with connector
Blank - SC - WC -
WD -
SD -
WA -
WB -
Rear release, crimp, signal and power
contacts supplied with connector
(when applicable)
Contacts not supplied with connector
(FO not stamped on connector)
Less contacts and waveguide (FOO not
stamped on connector)
Front release .025(0.63) D. x .150
(3.81) solder post and crimp, rear re-
lease power contacts (when applica-
ble) supplied with connector
Front release .025(0.63) D. x .250
(6.35) solder post and crimp, rear re-
lease power contacts (when applica-
ble) supplied with connector
Front release .025(0.63) D. x .375
(9.53) solder post and crimp, rear re-
lease power contacts (when applica-
ble) supplied with connector
Front release .025(0.63) D. x .500
(12.7) solder post and crimp, rear re-
lease power contacts (when applica-
ble) supplied with connector
Front release .025(0.63) Sq. x .250
(6.35) (1 wrap) wrap post and crimp,
rear release power contacts (when ap-
plicable) supplied with connector
Front release .025(0.63 Sq. x .375
(9.53) (2 wraps) wrap post and crimp,
rear relase power contacts (when ap-
plicable) supplied with connector
Front release .025(0.63) Sq. x 500
(12.7) (3 wraps) wrap post and crimp,
rear release power contacts (when ap-
plicable) supplied with connector
Front release .025 (0.64) Sq. x 641
(16.28) (3 wraps) wrap post and
crimp, rear release power contacts
(when applicable) supplied with con-
nector
NOTE: COAXIAL CONTACTS TO BE ORDERED SEPARATELY
FO -
FOO -
SA -
SB -
Layout included in the following ARINC configurations 702, 710, 711, 712, 714, 715, 716, 723.
Layout included in the following ARINC configurations 707, 718 & 730.
Layout included in the following ARINC configurations 701, 702, 703, 704, 705, 706, 724, 725.
Layout included in the following ARINC configurations 701, 717, 726, 729.
Connector
Layout
Shell
Size
Shell
Size
Shell Cavity Identification Shell Cavity Identification
Ref. ARINC
Characteristic
Ref. ARINC
Characteristic
Connector
Layout
Note: All layouts with "OPEN' insert cavity are not supplied with an insulator. If a Blank insert is required please consult factory.
Three Digit Number Contained within the Shell Layout Indicates Total Number of Contacts Available (including Waveguide)
A B C D E F A B C D E F
1
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
-005
-060
A060
-065
A065
-120
-125
-013
-017
-071
A071
-085
A085
86M
-093
-100
-137
-T141
-142
-155
155M
V155M
158M
-A158M
-163
A163
-164
A164
165M
-A165M
-167
173M
OPEN
OPEN
60
OPEN
60
60
60
OPEN
2W2
OPEN
71W1
Waveguide
71W1
2W2
4W4
OPEN
121
120T2
71W1
71W1
71W1A
71W1B
2W2
2W2
OPEN
150
150
Waveguide
150
2W2
4W4
2W2
OPEN
60
OPEN
60
Open
60
60
OPEN
2W2
71W1
OPEN
71W1
Waveguide
71W1A
4W4
OPEN
10T10
10T10
71W1
71W1
71W1A
71W1A
71W1A
71W1B
150
OPEN
Waveguide
150
2W2
150
150
71W1B
5W2
OPEN
OPEN
5W2
5W2
OPEN
5W2
13W2
13W2
OPEN
OPEN
13W2
13W2
13W2
85
100
6T6
13W2
OPEN
13W2
13W2
13W2
85
85
13W2
13W2
13W2
13W2
13W2
13W2
13W2
100
-T173
234
A234
-246
-248
250
250A
-251
-300
-306
-313
-370
-400
-021
-026
-113
-A113
-114
-284
-310
-330M
-A330M
-496
-600
-626
-713
A713
-734
-764
-800
-269M
271C
271M
-326
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
150
150
71W1
120T2
121
OPEN
150
Waveguide
150
150
150
150
150
4W4
OPEN
OPEN
OPEN
4W4
71W1
71W1
2W1
150
121
150
150
150
150
150
150
150
2W2
4W4
2W2
OPEN
10T10
71W1
150
120T2
121
150
BLANK
150
150
150
150
120T2
150
4W4
OPEN
OPEN
OPEN
4W4
71W1
71W1
2W2
150
121
150
150
150
150
150
150
150
2W2
4W4
2W2
150
13W2
13W2
13W2
6T6
6T6
100
100
100
OPEN
6T6
13W2
100
100
13W2
13W2
100
13W2
4W4
OPEN
13W2
13W2
13W2
121
OPEN
13W2
100
13W2
100
64
100
13W2
13W2
13W2
13W2
BLANK
OPEN
OPEN
OPEN
4W4
71W1
71W1
150
2W2
121
150
150
150
150
150
150
150
2W2
BLANK
4W4
OPEN
OPEN
OPEN
OPEN
OPEN
13W2
71W1
71W1
150
2W2
6T6
150
150
150
150
150
150
150
150
150
150
150
OPEN
13W2
13W2
100
85
OPEN
13W2
13W2
13W2
6T6
OPEN
13W2
13W2
100
3W
100
100
100
100
100
13W2
732
708
709
727
www.ittcannon.com 5
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
ARINC 600 BKAD/E/F
Shell Dimensions - Size 1
Plug
Retainer Plate
*This dimension indicates distance from centerline of retaining screw to the centerline of first contact cavity.
For further information, refer to ARINC 600 specification or consult factory.
Size 1 Receptacle Panel Cutout
Retainer Plate Size 1 Plug Panel Cutout
Receptacle
For further information, refer to ARINC 600 specification or consult factory.
* This dimension indicates distance from centerline of retaining screw to the centerline of first contact cavity.
.205 (5.21)*
.195 (4.95)
.5.465 (138.81)
5.455 (138.56)
.125 (3.18)*
.105 (2.67)
3.825 (97.16)
3.815 (96.90)
.135 (3.43)*
.115 (2.92)
2.059 (52.30)
2.049 (52.04)
1.313 (33.35)
1.303 (33.10)
.135 (3.43)
.125 (3.18)
.575 (14.60)
.565 (14.35)
.705 (17.91)
.695 (17.65)
.830 (21.08)
.820 (20.83)
.205 (5.21)*
.195 (4.95)
5.465 (138.81)
5.455 (138.56)
.125 (3.18)*
.105 (2.67)
3.825 (97.16)
3.815 (96.90)
.135 (3.43)*
.115 (2.92)
2.059 (52.30)
2.049 (52.04)
1.313 (33.35)
1.303 (33.10)
.135 (3.43)
.125 (3.18)
.575 (14.60)
.565 (14.35)
.705 (17.91)
.695 (17.65)
.810 (20.57)
.800 (20.32)
BKAD SERIES
1.198 (30.43) MAX
BKAE SERIES
1.550 (39.37) MAX
.620MIN
(15.75) .479 (12.17)
.469 (11.91)
.188 (4.78)
.184 (4.67)
6.500 MAX
(165.10)
6.995 MAX
(177.67)
.385 (9.78) MAX
.130 (3.30)
.120 (3.05)
BKAE SERIES
1.402 (35.61)MAX
1.195 (30.35)MAX
BKAD SERIES
1.102 (27.99) MAX
1.110 (28.19)
1.090 (27.69)
.655 (16.64)
.645 (16.38)
.148 +_ .003 (3.76 +_ 0.08)DIA
4 PLCS MTG HOLES
1.150(29.21)MIN
.653 (16.59)
.647 (16.43)
.180 (4.57)
.166 (4.22)
4 PL
6.890
(175.01)
MIN
6.353
(161.37)
6.347
(161.21)
.030 (.76)R
MAX 4 PL
.250
(6.35)
MAX
3.85 (9.78)
3.75 (9.52) .191 (4.85)
189 (4.80)
3 PL
.608 MAX
(15.44)
.6.515 MIN
(165.48)
.030 R MAX
(.76)
4 PL
.120 R MAX
(3.05)
4 PL
D
.240 (6.10)MAX
.030 R
(.76)
MAX
2 PL
.191 (4.85) 2 PL
.189 (4.80)
6.870
(174.50)
MIN
6.353
(161.37)
6.347
(161.21)
.240
(6.10)
MAX
3.65 (9.27)
3.55 (9.02)
.930 (23.62) MIN
.653
(16.59)
.647
(16.43)
.180 (4.57)
.166 (4.22)
4 PL D
.120 R (3.05)
MAX 4 PL
.287 R (7.29)
MAX 4 PL
6.355 (161.42)
6.345 (161.16)
6.645 (168.78)
6.629 (168.38)
C
B
A
C
B
A
C
B
A
.188 (4.78)
.184 (4.67)
BKAD/BKAF SERIES
1.317 (33.45) MAX
BKAE SERIES
1.670 (42.42)
7.455 MAX
(189.36)
.130 (3.30)
.120 (3.05)
BKAE SERIES
1.531 (38.89) MAX
BKAD/BKAF SERIES
1.221 (31.01) MAX 1.010 (25.65)
.990 (25.15)
.655 (16.64)
.645 (16.38)
.148 +_ .003 (3.76 +_ 0.08)DIA
4 PLCS MTG HOLES
6.355 (161.42)
6.345 (161.16)
6.627 (168.33)
6.607 (167.82)
C
B
A
www.ittcannon.com 6
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
ARINC 600 BKAD/E/F
Shell Dimensions - Size 2
Plug
260 (6 60)*
250 (6 35)
.070 (1.78)*
.050 (1.27)
5.355 (136.02)
5.345 (135.76)
135 (3.43)*
115 (2.92)
A
6 995 MAX
(177.67) 6.500 MAX
(165.10)
.620 MIN
(15.75)
.130 (3.30)
.120 (3.05)
BKAE SERIES
1.402 (35.61) MAX
BKAD SERIES
1.102 (27.99) MAX
BKAD SERIES
1.198 (30.43) MAX
2.135 (54.23)
2.125 (53.98)
6.645 (168.78)
6.629 (168.38)
6.360 (161.54)
6.340 (161.04)
1.810 (45.97)
1.790 (45.47)
1.431 (36.35)
1.421 (36.09)
.655 (16.64)
.645 (16.38)
653 (16.59)
647 (16.43)
191 (4.85)
189 (4.80)
3PL
030 (.76) R
MAX 4 PL
030 R
(.76)
MAX
4 PL
6.353
(161.37)
6.347
161.21
120 R
(3.05)
MAX
4 PL
385
(9.78)
375
(9.52)
250 MAX
(6.35)
.608 MAX
(15.44)
6.890
(175.01)
MIN
6.515 MIN
(165.48)
1.429
(36.30)
1.423
(36.14)
1.850 MIN
(46.99)
.180
(4.57)
166
(4.22)
8 PL
.148 +_ 003 (3.76 +_ 0.08) DIA
10 PLCS MTG HOLES
B
A
C
188(4.78)
184(4.67)
BKAE SERIES
11550 (39.37) MAX
1.195 MAX
(30.35)
3 770 (95.76)
3 760 (95.50)
2 004 (50.90)
1 994 (50.65)
1 258 (31.95)
1 248 (31.70)
168 (4.27)
158 (4.01)
.865 (21.97)
.855 (21.72) 1 415 (35.94)
1 405 (35.69)
260 (6.60)*
250 (6.35)
6.975 MAX
(177.16)
BKAE SERIES
1.531 (38.89) MAX
BKAD/BKAF SERIES
1.221 (31.01)MAX
130 (3.30
.120 (3.05)
BKAD/BKAF SERIES
1.317 (33.45)
2.135 (54.23)
2.125 (53.98)
A
B
C
.188 (4.78)
.184 (4.67)
6.627 (168.33)
6.607 (167.82)
6.360 (161.54
6.340 (161.04
2.780
(70.61)
MAX 2.200
(55.88)
MIN
.365 (9.27)
.355 (9.02)
.240 MAX
(6.10)
.653 (16.59)
.647 (16.43)
2 PLC
.287 R
(7.29)
MAX
8 PL
.120 R
(3.05)
MAX
4 PL
2.133
(54.18)
2.127
(54.03)
6.870
(174.50)
MIN
.260
(6.60)
.230
(5.84)
2 PL
.180
(4.57)
.166
(4.22)
10 PL
1.429
(36.30)
1.423
(36.14)
3 PL
030 R
(76)
MAX
2 PL
240
(6.10)
MAX
6.353
(161.37)
6.347
(161.21) D
1.530
(38.86)
MIN
191 (4.85)
189 (4.80)
2 PL
1.810 (45.97)
1.790 (45.47)
1.431 (36.35)
1.421 (36.09)
.655 (16.64)
.645 (16.38)
.148 .003 (3.76 +_ 0.08) DIA.
10 PLCS MTG HOLES
BKAE SERIES
1.670 (42.42)
.070 (1.78)*
.050 (1.27)
5.335 (136.02)
5.345 (135.76)
.135 (3.43)*
.115 (2.92)
3.770 (95.76)
3.760 (95.50)
2.004 (50.90)
1.994 (50.65)
1.258 (31.95)
1.248 (31.70)
.865 (21.97)
.855 (21.72)
.168 (4.27)
.158 (4.01)
1.415 (35.94)
1.405 (35.69)
Retainer Plate
*This dimension indicates distance from centerline of retaining screw to the centerline of first contact cavity.
For further information, refer to ARINC 600 specification or consult factory.
Size 2 Receptacle Panel Cutout
C
B
A
Retainer Plate Size 2 Plug Panel Cutout
Receptacle
For further information, refer to ARINC 600 specification or consult factory.
* This dimension indicates distance from centerline of retaining screw to the centerline of first contact cavity.
B
CD
www.ittcannon.com 7
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
ARINC 600 BKAD/E/F
Shell Dimensions - Size 3
.260 (6.60)*
.250 (6.35)
.070 (1.78)*
.060 (1.52)
5.355 (136.02)
5.345 (135.76)
.135 (3.43)*
.115 (2.92)
2.004 (50.90)
1.994 (50.65)
1.258 (31.95)
1.248 (31.70)
3.770 (95.76)
3.760 (95.50)
.890 (22.61)
.870 (22.10)
1.68 (4.27)
.158 (4.01)
1.440 (36.58)
1.430 (36.32)
1.252 (31.80)
1.242 (31.55)
6.995 MAX
(177.67)
6.500
(165.10)
MAX
620 MIN
(15.75)
.130 (3.50)
.120 (3.05)
BKAE SERIES
1.402 (35.61) MAX
1.150 MAX
(29.21)
BKAD SERIES
1.102 (27.99) MAX .655 (16.64)
.645 (16.38)
.655 (16.64)
.645 (16.38)
2.135 (54.23)
2.125 (53.98)
2.135 (54.23)
2.125 (53.98)
BKAD SERIES
1.198 (30.43) MAX.
BKAE SERIES
1.550 (39.37) MAX
6.975 MAX
(177.16)
BKAE SERIES
1.531 (38.89) MAX
BKAD/BKAF SERIES
1.221 (31.01)MAX
.130 (3.30)
.120 (3.05)
BKAD/BKAF SERIES
1.317 (33.45)MAX
BKAE SERIES
1.670 (42.42 )MAX
.188 (4.78)
.184 (4.67)
.188 (4.78)
.184 (4.67)
6.645 (168.78)
6.629 (168.38)
6.355 (161.42)
6.345 (161.16)
6.627 (168.33)
6.607 (167.82)
6.355 (161.42)
6.345 (161.16)
1.953
(49.61)
1.947
(49.45)
3.310 MIN
(84.07) .030 (.76)R
MAX 4 PL
.030 R MAX
(.76)
4 PL
.120 R MAX
(3.05)
4 PL
6.353
(161.37)
6.347
(161.21) 6.515 MIN
(165.48)
.590 MAX
(14.99)
.385
(9.78)
.375
(.952)
.191 (4.85)
.189 (4.80)
3 PL
.180
(4.57) D
.166
(4.22)
12 PL .2.889
(73.38)
2.883
(73.23)
.250
(6.35)
MAX
.653
(16.59)
.647
(16.43)
3.000 (76.20) MIN
.287 R MAX
(7.29) 8 PL
.191 (4.85)
.189 (4.80)
3 PL
3.275 (83.18)
3.245 (82.42)
2.891 (73.43)
2.881 (73.18) 1.955 (49.66
1.945 (49.40)
2.889 (73.38)
2.883 (73.23) 3 PL
6.870
(174.50)
MIN
.960
(24.38)
.930
(23.62)
2 PL
.240 MAX
(6.10)
.030 R MAX
(.76)
2 PL
.120 R MAX
(3.05)
4.PL
.180 (4.57)
.166 (4.22)
14 PL
2.780
(70.61)
MAX 2.20
(55.88)
MIN
2.133
(54.18)
2.127
(54.03)
.365
(9.27)
.355
(9.02) .240
(6.10)
MAX.
1.953
(49.61) 2 PL
1.947
(49.45)
.653
(16.59) 2 PL
.647
(16.43)
D
3.275 (83.18)
3.245 (82.42)
2.891 (73.43)
2.881 (73.18) 1.955 (49.66)
1.945 (49.40)
.148 +_ .003 DIA.
(3.76 +_ 0.08)
14 PLCS MTG HOLES
.148 +_ .003 DIA.
(3.76 +_ 0.08)
14 PLCS MTG HOLES
2.712 (68.88)
2.702 (68.63)
2.875 (73.02)
2.865 (72.77)
Retainer Plate
Receptacle
Plug
Size 3 Plug Panel Cutout
* This dimension indicates distance form centerline of retaining screw to the centerline of first contact cavity.
For furter information, refer to ARINC 600 specification or consult factory.
Retainer Plate Size 3 Plug Panel Cutout
* This dimension indicates distance form centerline of retaining screw to the centerline of first contact cavity.
For furter information, refer to ARINC 600 specification or consult factory.
.260 (6.60)*
.250 (6.35)
.070 (1.78)*
.060 (1.52)
5.355 (136.02)
5.345 (135.76)
.135 (3.43)*
.115 (2.92)
2.004 (50.90)
1.994 (50.65)
1.258 (31.95)
1.248 (31.70)
3.770 (95.76)
3.760 (95.50)
.870 (22.10)
.850 (21.59)
1.68 (4.27)
.158 (4.01)
1.440 (36.58)
1.430 (36.32)
1.252 (31.80)
1.242 (31.55)
2.712 (68.88)
2.702 (68.63)
2.875 (73.02)
2.865 (72.77)
www.ittcannon.com 8
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
ARINC 600 BKAD/E/F
Contact Arrangements - Shell Size 1
Contact Arrangements - Shell Sizes 2 and 3
BKAD/BKAE (Plug Rear face shown)
BKAD/BKAE (Plug Rear face shown)
REAR SURFACE WHITE ON BLUE TO INDICATE REAR RELEASE REAR REMOVAL CONTACTS ENGAGING END SURFACE WHITE ON RED TO INDICATE
FRONT RELEASE FRONT REMOVAL CONTACTS
**Pending ARINC release.
NOTE: In layouts using #22 contacts mixed with any other contact size (20HD, 16, 12), the size #22 contact type (pin or socket) determines the insulator as a pin insert or a socket insert.
(For Contact Cavity Location and Contact Cavity Identification refer to ARINC 600 or consult factory)
REAR SURFACE WHITE ON BLUE TO INDICATE REAR RELEASE, REAR REMOVAL CONTACTS FOR INSERTS CONTAINING STANDARD SIGNAL & POWER CONTACTS
(For Contact Cavity Location and Contact Cavity Identification refer to ARINC 600 or consult factory)
30T2
28 #22
2 #8 TWINAX/COAX
(#8 Grounded to
Shell)
60
60 #22
6**
6 #8 6T6**
6 #8
(Metallic Insert)
13W2
4 #20, 4 #12, 3 #16
2 #5 COAX
24T4**
20 #20, 4 #8
100
100 #22
85
80 #22, 4 #20, 1 #16
59**
50 #22, 5 #16, 4 #12
34**
24 #20, 10 #18
4
4 #12 5W2
1 #12
2 #16
2 #5 COAX
40
40 #22 60
60 #22 5W2
1 #12
2 #16
2 #5 COAX
BKAF - Available Receptacle Shell Only
(Front Release)
Shell Cavity
A or B
Shell Cavity
C or F
Shell Cavity
CShell Cavity
C
Shell Cavity
A or B
1
2
3
4
5
6
71T
2T
A B B
2
3
4
5
6
7
8
9
10
11
12
13
14
15
2
3
4
5
6
7
8
9
10
2
1
3
4
5
6
7
8
9
10
2
1
3
4
5
6
7
8
2
3
4
5
6
7
8
2
3
4
5
2
1
1
7
13
19
25
30
6
12
18
24
29
34
3
4
5
51 52 53 54 55
56 57 58 59
6
7
8
9
10
2
1
3
4
5
6
7
8
9
10
11
12
13
14
15
C D
BA C D
B
114 3 2 1 1
3
B C D E F G H J K
B C D E F G H J K
B
1 2 3 4 5
C D E F G H J K
B C D E F G H J K
BA C D E F G H J K
5 6 2
4
7
9 14
15
21
23 24
22
20
8
6
8 7 5
10 9
11
13 12
2
2
33
44
5
5
66
C D
1
2
3
45
4
3
2
1
5
4
3
2
1
C
B
2
3
4
5
6
7
8
9
10
11
12
13
14
15
2
3
4
5
6
7
8
9
10
11
12
13
14
15
C D
B C D
www.ittcannon.com 9
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
ARINC 600 BKAD/E/F
Contact Arrangements - Shell Sizes 2 and 3
BKAD/BKAE (Plug Rear face shown)
Shell Cavity
A,B,D,E
2W2
2 #1 COAX 4W4
4 Modified
#1 COAX
(Metallic Insert)
10T10**
10 #8 TRIAX/COAX
(#8 Grounded to Shell)
(Metallic Insert)
24**
24 #12
71W1
70 #22
1 #1 COAX
71W1B
70 #22
1 #1 COAX
60**
60 #20
49T2**
47 #20
2 #8
110**
100 #22
5 #12 & 5 #20
** Pending ARINC release.
(For Contact Cavity Location and Contact Cavity Identification refer to ARINC 600 or consult factory)
REAR SURFACE WHITE ON BLUE TO INDICATE REAR RELEASE. REAR REMOVAL CONTACTS FOR INSERTS CONTAINING STANDARD SIGNAL & POWER CONTACTS
150
150 #22 120T2 **
118 #22
2 #8 TWINAX/COAX
(#8 Grounded to Shell)
121**
110 #22
5 #16
6 #20
www.ittcannon.com 10
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
ARINC 600 BKAD/E/F
Contact Arrangements - Shell Sizes 2 and 3
BKAF - Available Receptacle Shell ONLY
(Front Release)
SHELL CAVITY
A, B, D, E,
BKAF - Available Receptacle Shell ONLY
(Front Release)
SHELL CAVITY C, F
** Pending ARINC release.
NOTE #22 CONTACTS ARE SOCKETS, 20HD,16, 12 ARE PIN CONTACTS.
(For Contacts Cavity Location and Contact Cavity Identification refer to ARINC 600 or Consult Factory)
ENGAGING END SURFACE WHITE ON RED TO INDICATE FRONT RELEASE FRONT REMOVAL CONTACTS FOR INSERTS CONTAINING STANDARD SIGNAL & POWER CONTACTS
ENGAGING END SURFACE WHITE ON RED TO INDICATE FRONT RELEASE, FRONT REMOVAL CONTACTS FOR INSERTS CONTAINING STANDARD SIGNAL & POWER CONTACTS
71W1
70 #22
150
150 #22
6T6**
6 #8 13W2
4 #20
3 #16
4 #12
2 #5 COAX
100
100 #22
71W1B
70 #22 10T10**
10 #8 121F**
110 #22
6 #20
5 #16
ARINC 600 BKAD/E/F
Waveguide Connections
Polarization (Engaging End)
WAVEGUIDE DETAIL
SHOWN FULLY ENGAGED
- E - - A - NO
ENGAGEMENT
1.255 (31.88)
FULLY
ENGAGED
CONN.
RECEPTACLE
CENTER
POST
RIGHT
POST
LEFT
POST
CENTER
POST
RIGHT
POST
LEFT
POST
CENTER
POST
RIGHT
POST
LEFT
POST
CENTER
POST
RIGHT
POST
LEFT
POST
CENTER
POST
RIGHT
POST
LEFT
POST
CENTER
POST
RIGHT
POST
LEFT
POST
CONN. PLUG
INSULATOR AND
WAVEGUIDE RETAINING
PLATE
Plug
BKA*1
PLUG RECEPTACLE PLUG RECEPTACLE PLUG RECEPTACLE
BKA*2 BKA*3
2.810 (71.37)
2.690 (68.33)
1.416 / 1.404
(35.97) / (35.61)
1.091 / 1.079
(27.71) / (27.41)
4 #8-32 UNC-2B
THRU HOLES
Receptacle
1.370 (34.80)
1.310 (33.27)
.522 (13.26
.488 (12.40)
www.ittcannon.com 11
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
www.ittcannon.com 12
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
ARINC 600 BKAD/E/F
Polarizing Positions
POST
Dark area represents post
1 2 3 4 5 6
Position Position
Left
Post Center
Post Right
Post Left
Post Center
Post Right
Post Position Left
Post Center
Post Right
Post Position Left
Post Center
Post Right
Post Position Left
Post Center
Post Right
Post Position Left
Post Center
Post Right
Post
Plug Shell Receptacle Shell
KEY
Kit P/N 320-1067-000Kit P/N 320-1067-003
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
1
1
1
1
1
1
6
6
6
6
6
6
5
5
5
5
5
5
4
4
4
4
4
4
3
3
3
3
3
3
2
2
2
2
2
2
1
1
1
1
1
1
6
6
6
6
6
6
5
5
5
5
5
5
4
4
4
4
4
4
3
3
3
3
3
3
2
2
2
2
2
2
1
1
1
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
4
4
4
4
4
4
5
5
5
5
5
5
6
6
6
6
6
6
1
1
1
1
1
1
2
2
2
2
2
2
3
3
3
3
3
3
4
4
4
4
4
4
5
5
5
5
5
5
6
6
6
6
6
6
1
1
1
1
1
1
2
2
2
2
2
2
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
2
2
2
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
4
4
4
5
5
5
5
5
5
6
6
6
6
6
6
1
1
1
1
1
1
2
2
2
2
2
2
3
3
3
3
3
3
4
4
4
4
4
4
5
5
5
5
5
5
6
6
6
6
6
6
1
1
1
1
1
1
2
2
2
2
2
2
3
3
3
3
3
3
4
4
4
4
4
4
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
6
6
6
6
6
6
1
6
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
1
6
5
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
5
5
5
5
5
5
1
1
1
6
6
6
6
6
6
5
5
5
5
5
5
4
4
4
4
4
4
3
3
3
3
3
3
2
2
2
2
2
2
1
1
1
1
1
1
6
6
6
6
6
6
5
5
5
5
5
5
4
4
4
4
4
4
3
3
3
3
3
3
2
2
2
2
2
2
1
1
1
1
1
1
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
5
5
5
5
5
5
4
4
4
4
4
4
3
3
3
3
3
3
2
2
2
2
2
2
1
1
1
1
1
1
6
6
6
6
6
6
5
5
5
5
5
5
4
4
4
4
4
4
3
3
3
3
3
3
2
2
2
2
2
2
5
5
5
5
5
5
6
6
6
6
6
6
1
1
1
1
1
1
2
2
2
2
2
2
3
3
3
3
3
3
4
4
4
4
4
4
5
5
5
5
5
5
6
6
6
6
6
6
1
1
1
1
1
1
2
2
2
2
2
2
3
3
3
3
3
3
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
1
6
5
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
ARINC 600 BKAD/E/F
Contact and Termination Tooling Data
BKA* (LIF) Crimp Contacts
BKAF-ARINC 600 Size 22 Wrap Post Socket Contacts With .025(6.35) Square Wire-Wrappable Tails-Receptacle Only.
BKA* Thermocouple Contacts
BKAF Printed Circuit Solder Post Socket Contacts Size 22 with .025(6.35) Dia. Printed Circuit Tails-Receptacle Only.
The new low insertion force, front-insertable, front-removable #22 socket
contacts with .025(6.35) dia., PC tails are now availble for use in the BKAF
non-environmental receptacle version only.
These contacts can be sold separately or they can be supplied with a connector
(see How to Order). Use part numbers shown in the table on the right when
ordering separately.
BKAD/F Solder Post, Power Pin Contacts (Captive)-Receptacle Only.
Contacts are captivated between two unbonded insulator halves.
BKAF Solder Post Pin Contact Front Release
Front Release Pin Contacts Size 20 and 16
The new low insertion force, front-insertable, front-removable #22 socket
contacts with .025(6.35) square wire wrappable tails are now available for use
in the BKAF non-enviornmental receptacle version only.
These contacts can be sold separately or they can be supplied with a connector
(see How to Order). Use part numbers shown in the table on the right when
ordering separately.
Contact Size and Part Numbers
Part Numbers
Size Pin
Used in Plug
030-2259-000 Used in Recep.
031-1287-000 M22520
/2-01 995-0001-
584 M22520
/2-23 995-0002-
015 M81969
/1-01 CIT-DPXMA-22-1
Metal
070256-0000
CET-DPXMA-22
Metal
070317-0000
980-0004-804
Metal Tip 26
24
22
.054
(1.4) .130/.110
(3.3)/(2.8)
3
3
4
Used in Plug
030-1975-009 Used in Recep.
031-1113-009
Used in Plug
030-1975-010 Used in Recep.
031-1113-010
M22520
/2-01 995-0001
584 M22520
/2-23 995-0002-
015 M81969
/1-01
CIT-DPXMA-22-1
Metal
070256-0000
CET-DPXMA-22
Metal
070317-0000
980-0004-804
Metal Tip 26
24
22
.054
(1.4) .130/.110
(3.3)/(2.8)
3
3
4
Used in Recep
030-2273-000 Used in Plug
031-1302-000 M22520
/2-01 995-0001-
584 M22520
/2-08 995-0001-
604 M81969
/1-02 - - 980-0004-805
Metal Tip 22
20 .071
(1.8) .167/.147
(4.2)/(3.7)
6
7
Used in Recep
030-2280-000 Used in Plug
031-1303-000 M22520
/1-01 995-0001-
585 M22520
/1-02 995-0001-
736 M81969
/1-03 - CET 16-9
Plastic 980-0004-806
Metal Tip 20
18
16
.103
(2.6) .207/.230
(6.9)/(5.8)
4
5
6
Used in Recep
030-2286-000 Used in Plug
031-1308-000 M22520
/1-01 995-0001-
585 M22520
/1-11 995-0002-
027 M81969
/14-04 - CET 12-4
Plastic CIET-12
Plastic 14
12 .135
(3.4) .270/.230
(6.9)/(5.8)
7
8
Socket MIL
Spec.
MIL
Spec.
Se-
lec-
tor# Insertion Extraction Ins./Ext. AWG Insul
Dia. Max Strip
Length
ITT
Cannon ITT
Cannon
Mil Spec.
Size Pin Socket MIL
Spec.
MIL
Spec.
WA
WB
WC
WD
2D HD
16
12
SA
SB
SC
SD
*Applies to BKAF 13W2 and 5W2 inserts only
*Consult facotry for other available lengths
20HD
16HD
12HD
20
20
16
16
16
20
030-3296-001
030-3296-002
030-3297-001
030-3297-002
030-3297-005
030-3296-004
.034 (0.86)/.030 (0.76)
.034 (0.86)/.030 (0.76)
.052 (1.32)/.048 (1.22)
.052 (1.32)/.048 (1.22)
.052 (1.32)/.048 (1.22)
.034 (0.86)/.030 (0.76)
.260 (6.60)
.385 (9.78)
.260 (6.60)
.385 (9.78)
.300 (7.62)
.300 (7.62)
1
2
3
3
.250 (6.35)
.375 (9.52)
.500 (12.70) CET-BKAF 22S
.641 (16.28)
.150 (3.81)
.250 (6.35)
.375 (9.52) CET-BKAF 22S
.500 (12.70)
031-1351-000
031-1351-001
031-1351-002
031-1351-003
031-1352-000
031-1352-001
031-1351-002
031-1352-003
030-2358-000
030-2357-000
030-2356-000
030-3287-000
030-3287-001
030-3287-002
.030 (0.76)
.050 (1.27)
.081 (2.06)
.300* (7.62)
.300* (7.62)
.300* (7.62)
317-1798-00
317-1798-02
317-1798-02
.032 (0.81)
.050 (1.27)
.081 (2.06)
.150 (3.81)
.150 (3.81)
.150 (3.81)
Se-
lec-
tor# Insertion Extraction Ins./Ext. AWG Insul
Dia. Max Strip
Length
ITT
Cannon ITT
Cannon
Mil Spec.
2222
2222
Alumel
2222
Chromel
2020HD
1616
1212
Tool P/N Locator P/N ITT Cannon
Crimp Tooling Insertion/Extraction Tooling Wire Size
Contact Size and Part Numbers
Part Number Tool P/N Locator P/N ITT Cannon
Contact Mod.
Contact Mod. Part Number Min. Post Extension Extraction Tool
Contact Size Part Number Post Dia. Min. Post Extenstion*
Part Number Extraction Tool
Number
of Wraps Min. Post
Extension
Crimp Tooling Insertion/Extraction Tooling Wire Size
Contact Size Part Number
Contact Size Part Number PC Tail Dia.
Post Dia. Extraction Tool
Min. Post
Extension
Min. Post Extension
www.ittcannon.com 13
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
ARINC 600 Rack and Panel Connectors BKAD/E/F
Size 5 Coax Contact (Rear insertable/removable)
Size 12 Shielded Contact (Rear insertable/removable)
Size 1 Modified Coaxial Contacts (4W4 Layout Only)
Crimp Center Contact-Conforming to ARINC 600
Crimp Tooling
Center Contact
Part Number
Part Number
Part Number Style Solder Type
Replacement Termination Kits
CrimpType
Coax
Coax Replacement Termination Kits
Cable Accommodation
Part Number Style Solder Type CrimpTypeCable Accommodation
RG316 DS
RG142
Various
349-1051-002
349-1044-000
349-1042-000
Straight
Straight
SMA Adapter
320-1066-008
320-1066-007
N/A
N/A
RG214
AA-5886
RG393
ECS 311201
AA-5887
AA-5888
RG142
Various
349-1043-001
349-1048-000
349-1051-000
349-1046-000
349-1049-000
349-1050-000
349-1047-000
349-1047-001
Straight
Straight
Straight
Straight
Straight
Straight
Straight
TNC Adapter
320-1066-000
320-1066-002
320-1066-003
320-1066-001
320-1066-004
320-1066-005
320-1066-006
320-1066-016
320-1066-018
320-1066-019
320-1066-017
320-1066-013
320-1066-014
320-1066-015
Cable
Accommo-
dation
RG-196A/U 249-1767-000 M22520/2-01 995-0001-584 K-182 995-0002-051 M22520/1-01 M22520/10-05A 995-0001-071 M81969/28-02 CET-12-4
Plastic
-
RG-174/U - M22520/2-01 995-0001-584 K-182 995-0002-051 M22520/1-01 M22520/10-05A 995-0001-071 M81969/28-02 CET-12-4
Plastic
249-1768-000
BMS-1348
(BG) - M22520/2-01 995-0001-584 K-644 995-0002-050 M22520/1-01 M22520/10-05A 995-0001-071 M81969/28-02 CET-12-4
Plastic
249-2203-000
5071
(HW) 249-1767-001 M22520/2-01 995-0001-584 K-182 995-0002-051 M22520/1-01 M22520/10-05A 995-0001-071 M81969/28-02 CET-12-4
Plastic
-
Pin
(Receptacle
Connector)
Socket
(Plug
Connector) MIL Spec MIL Spec
ITT
Cannon ITT
Cannon ITT
Cannon ITT
Cannon
MIL Std
Frame Jaw
Daniels
Tool P/N Center Contact Crimp Tooling
Locator P/N Outer Shell Tool Tool
Cable
Accommo-
dation
RG-58C/U
BA-5903
(BG) 349-0014-000 349-0013-000 M22520/2-01 995-0001-584 K-345 995-0002-049 M22520/5-01 M22520/5-45B CCT-HX3-156 CET-C8
5021K1011
(Raychem) 349-0016-000 349-0015-000 M22520/2-01 995-0001-584 K-345 995-0002-049 M22520/5-01 M22520/5-45B CCT-HX3-156 CET-C8
RG-223 349-1060-100 349-1059-000 M22250/2-01 995-0001-584 K-345 995-0002-049 M22520/5-01 M22520/5-45B CCT-HX3-156 CET-C8
RG-400 - 349-1003-000 M22250/2-01 995-0001-584 K-345 995-0002-049 M22520/10-01 M22520/10-23 - CET-C8
RG-316 - 349-1004-000 M22250/2-01 995-0001-584 K-345 995-0002-049 M22520/10-01 M22520/10-23 -
- -
- -
CET-C8
Pin
(Receptacle
Connector)
Socket
(Plug
Connector) MIL Spec ITT Cannnon Daniels ITT Cannon Frame Jaw Complete
Tool Extraction
Tool
Tool Locator MIL STD ITT Cannon
Outer Shell
Plug Connector
Customer Use Drawings:
All Coax contacts (except 349-1047-001) customer use drawing #349-0000-305
Crimp termination kits: Customer use drawing #320-0000-305
Solder termination kits: Customer use drawing #320-0000-304
Receptacle Connector
Customer Use Drawings:
Coax contacts 349-1051-002 and 349-1044-000 are located on cusomter use drawing #349-0000-304
Coax contacts 349-1042-000 is located on cusomter use drawing #320-1042-000
www.ittcannon.com 14
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
www.ittcannon.com 15
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
ARINC 600 Rack and Panel Connectors BKAD/E/F
Sizes 1 Coax Contacts (71W1 layout only)
Sizes 1 Coax Contacts (To be used with connectors containing 71W1A, 71W1B and 2W2 insert modifier-"M")
Same standard coax contacts as used in ITT Cannon's DPX (ARINC 404) connector series.
Cable
Accommodation
RG-9/U
RG-214/U
NSA 935354
NSA 935355
RG-55/U
RG-58/U
RG-142/U
RG-400/U
RG-58/U
RG-142/U
RG-225/U
RG-402/U
UT-141
RG-402/U
UT-141
SMA Jack
Termination
Coax
Part Number
249-1521-000 249-1521-002 021-0144-000
021-0144-003
021-0144-006
021-0144-001
249-2201-000
249-1554-002
249-1604-003
249-5027-016
-
249-1554-000
249-1604-001
249-1604-002
249-5027-008
249-5027-017
Style
Straight
Straight
Straight - -
90˚
Replacement Coax
Termination Kit Replacement Coax
Body Assembly
Cable
Accommodation
RG-9/U
NSA 935354
NSA 935355
RG-58/U
RG-142/U
RG-402/U
RG-214/U
RG-115/U
Cable
Accommodation Cable
Accommodation Standard Size 1
Part Number
349-0017-000 349-1053-003
349-1053-007
349-1053-006
349-1053-008
349-1053-005
349-1053-004
349-1053-003
349-1053-002
349-1053-001
349-1053-000
-
-
-320-1066-000 Straight
Straight
Straight
Straight
Straight
Straight
Straight
Straight
Straight
Straight
Straight
320-1066-003
320-1066-006
320-1066-005
-
320-1066-002
-
320-1066-001
320-1066-004
-
-
-
-
349-0017-000
349-0017-000
349-0018-000
349-0005-000
349-0007-000
-
-
-
-
-
-
-
Modular Size 1
Part Number Style
Termination Kit for
Modular Size 1 Coax
Part Number
RG-142B/U RG-214/U
RG-393/U
BA-6903
5012H3012
(Raychem)
RG-142B/U
RG-402/U
UT-141
AA-5888
ECS-310801
ECS-311201
AA-5886
AA-5887
Adam Russell
PC-38
BSX-7004-502
RG-402/U
UT-141
SMA Jack
Termination
RG-214/U
RG-393/U
BA-6903
(BG)
5012H3012
(Raychem)
RG-142B/U
RG-402/U
UT-141
Style
Right Angle
Right Angle
Straight
Straight
Straight
Straight
Straight
349-0021-000
349-0022-000
349-0023-000
349-0002-000
349-0004-000
349-0006-000
349-0008-000
Designed to be interchangeable with contacts made by other manufacturers.
Coax
Part Number
249-1522-000 249-1522-002
249-2202-000 021-0144-004
021-0144-008
021-0144-011
320-0051-000
249-5027-013
249-5027-015
249-1882-000
249-1885-002
249-5123-000
249-5123-001
-
Style
Straight
Straight
Straight
Replacement Coax
Termination Kit Replacement Coax
Body Assembly
Receptacle Connector
Plug Connector
Receptacle Connector Plug Connector
www.ittcannon.com 16
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
ARINC 600 Rack and Panel Connectors BKAD/E/F
Size 8 Coaxial Contacts
Size 8 Twinax Contacts
Size 8 Ground Contacts
Plug Connector
Receptacle Connector
Plug Connector
Receptacle Connector
Receptacle Connector
Plug Connector
Contact Type
Socket
Part Number
*Engagement **Termination
Short Long Crimp
RR-RR
X-
-
-
-
-349-1087-000
-
-
-
-
-
349-1087-001
349-1084-000
349-1084-001
349-1084-002
349-1084-003
349-1086-000
349-1086-001
349-1006-000
349-1081-000
-
-
-
-
X
X
349-1007-000
349-1080-000
349-1080-001
349-1080-002
349-1080-003
349-1082-000
349-1082-001
349-1088-000
031-3300-000 - - X 8, 10 AWG
030-3306-000
030-3306-001
030-3676-000
-
-
-
X X 8, 10 AWG
8, 10 AWG
8, 10 AWG
X X
- X
-
X
-
X
-
X
-
-
-
-
X
X
X
-
X
X
X
-
X
X
X
X
X
X
X
X
XX
X
X
X
X
X
X
X
X
X
Crimp
FR-RR Solder
.250 (6.35) FR-FR
.375 (9.52) RF Cable
Number
Contact Type
Socket
Part Number
*Engagement **Termination
Short Long Crimp
RR-RR Crimp
FR-RR FR-FR
.250 (6.35) Solder
.375 (9.52) RF Cable
Number
Contact Type
Socket
Part Number
*Engagement **Termination
Short Long Crimp
RR-RR Crimp
FR-RR Solder
.250 (6.35) FR-FR
.375 (9.52) RF Cable
Number
Contact Type
Socket
Part Number
*Engagement **Termination
Short Long Crimp
RR-RR Crimp
FR-RR Solder
.250 (6.35) FR-FR
.375 (9.52) RF Cable
Number
Contact Type
Socket
Part Number
* The electrical engagement of "Long" contacts is .150 (3.81) greater than the electrical engagement of "Short" contact.
**RR-RR indicates rear release, rear removal.
FR-RR indicates front release, rear removal.
FR-FR indicates front release, front removal.
*Engagement **Termination
Short Long Crimp
RR-RR Crimp
FR-RR Solder
.250 (6.35) FR-FR
.375 (9.52) Wire
Size
Contact Type
Socket
Part Number *Engagement **Termination
Short Long Crimp
RR-RR Crimp
FR-RR Solder
.250 (6.35) FR-FR
.375 (9.52) Wire
Size
Adams-Russell Co. Inc.
FC11Z
Adams-Russell Co. Inc.
FC14Z
Adams-Russell Co. Inc.
FC11Z
Adams-Russell Co. Inc.
FC14Z
M17/176-00002
Tensolite Co.
24463/9 B017X-2 (LD)
Tensolite Co.
24463/9 B017X-2 (LD)
Tensolite Co.
24463/9 B017X-2 (LD)
Tensolite Co.
24463/9 B017X-2 (LD)
M17/176-00002
www.ittcannon.com 17
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
ARINC 600 Rack and Panel Connectors BKAD/E/F
Sealing Plugs-BKAE Environmental Connnectors Only
Filler Plugs-BKAD Non-Environmental Connectors Only
Cavity Reducer
Dust Caps
Part
Number Contact
Size Color A B C
Part
Number
#5 Coax to #12 Contact
Cavity reducers are available when additional circuits are required for siz 12 power contacts. These
reducers, having the internal configuration of size 12 power contact, are inserted into the size 5 coaxial
insulator cavity to create size 12 power contact cavity.
225-0094-000
225-1013-000
225-0070-000
225-0071-000
225-0072-000
225-0090-000
225-0095-000
225-0096-000
225-0097-000
225-0098-000
225-0099-000
025-1121-001
025-1122-001
025-1123-001
025-1124-001
Pin
P/N 021-8756-000 Socket
P/N 021-8757-000
Note: Supplied as standard for BKA product line only.
BKAD 1-A & B-Plug
BKAD 1-C-Plug
BKAD 2&3-A & B-Plug
BKAD 2&3-C-Plug
025-1155-001
025-1156-001
025-1157-001
025-1158-001
BKAD 1-A&B-Receptacle
BKAD 1-C-Receptacle
BKAD 2&3-A & B-Receptacle
BKAD 2&3-C-Receptacle
22
20
16
12
#5 Coax
(Pin)
22
20
16
12
#5 and #9 Coax
#5 and #9 Coax
(Socket)
Black
Red
Blue
Yellow
White
Black
Red
Blue
Yellow
White
.063 (1.6)
.085 (2.2)
.115 (2.9)
.171 (4.3)
.365 (9.3)
.040 (1.0)
.065 (1.6)
.075 (1.9)
.121 (3.1)
.287 (7.3)
.469 (11.9)
.469 (11.9)
.469 (11.9)
.564 (14.3)
.835 (21.2)
White
.069 (1.7)
.083 (2.1)
.131 (3.3)
.187 (4.7)
.275 (7.0)
.275 (7.0)
.051 (1.3)
.069 (1.7)
.108 (2.7)
.156 (4.0)
.251 (6.4)
.251 (6.4)
.420 (10.7)
.350 (8.9)
.320 (8.1)
.320 (8.1)
.450 (11.4)
1.061 (26.9)
Part Number Part NumberDescription Description
Contact
Size Color A B C
P/N 225-0090-000
Material: Teflon
(All others thermoplastic)
P/N 225-0099-000
Material: Teflon
(All others thermoplastic)
BKAF P/N 225-1058-000
(Size 22 - Black)
(See Customer Use Drawing for details)
Conductive dust caps protect against
static electricity.
AA
AA
B
BB
B
C
CC
C
www.ittcannon.com 18
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
ARINC 600 Rack and Panel Connectors BKAD/E/F
Replaceable Inserts
Part Number
Socket AssemblyPin AssemblyClass
BKAD
BKAE
BKAE
BKAD
BKAE
BKAD
BKAE
BKAF
BKAE
BKAD
BKAE
BKAF
BKAD
BKAE
BKAD
BKAE
BKAF
BKAD
BKAE
BKAD
BKAE
BKAE
BKAE
BKAE
BKAD
BKAE
BKAF
BKAD
BKAE
BKAF
BKAD
BKAE
BKAF
BKAD
BKAE
BKAF
BKAD
BKAE
BKAF
BKAD
BKAE
BKAF
BKAE
BKAD
BKAE
BKAF
BKAD
BKAE
BKAD
BKAE
BKAF
144-2944-000
144-2944-000
143-1156-001
177-1000-002
177-1000-002
143-1912-000
143-1912-001
143-1141-000
143-1154-001
228-1026-002
228-1026-001
N/A
228-1027-002
228-1027-001
143-1908-000
143-1908-001
143-1142-000
143-1173-000
143-1173-001
143-1159-001
143-1097-005
143-1171-001
143-1167-001
143-3714-003
143-1910-000
143-1910-001
N/A
143-1958-000
143-1958-002
N/A
143-2085-001
143-2085-000
N/A
143-1113-000
143-114-000
N/A
143-3877-000
143-3879-000
N/A
143-2015-000
143-2015-001
N/A
143-1182-000
N/A
143-1165-001
N/A
143-1150-002
143-1150-001
143-1906-000
143-1906-001
N/A
144-2945-000
144-2945-000
143-1157-001
177-1001-004
177-1001-004
143-1913-000
143-1913-001
N/A
143-1155-001
228-1012-003
228-1012-001
228-1015-001
N/A
228-1014-002
143-1909-000
143-1909-001
N/A
143-1174-000
143-1174-001
N/A
143-1098-005
143-1172-001
143-1170-001
143-3715-003
143-1911-000
143-1911-001
143-2065-000
143-1960-000
143-1960-002
143-2090-000
143-2086-001
143-2086-000
143-2066-000
143-1111-000
143-1112-000
143-1118-000
143-3878-000
143-3880-000
143-1178-000
143-2016-000
143-2016-001
143-2067-000
143-1183-000
143-1166-002
143-1166-001
143-1177-000
143-1158-002
143-1158-001
143-1907-000
143-1907-001
143-2068-000
Layout
2W2**
A
4W4**
5W2
6
6T6
10T10
13W2
30T2
34
40
59*
60-#20**
60-#22**
71W1
71W1A*
71W1B
85
100
110
120T2
121
150
Consult factory for Insert Part Numbers not listed.
*Modified 71W1 insert to be used with connectors containing 71W1 insert modifier "M"
**"Pin Inserts' accept receptacle coax contacts. "Socket Inserts" accept plug coax contacts.
ARINC 600 Rack and Panel Connectors BK AD/E/F
Cross Reference-Part Number/Customer-Use Drawing
COMPONENT
PART NUMBER CUSTOMER USE
DRAWING NUMBER COMPONENT
PART NUMBER CUSTOMER USE
DRAWING NUMBER COMPONENT
PART NUMBER CUSTOMER USE
DRAWING NUMBER
030-1975-009
030-1975-010
030-2259-000
030-2273-000
030-2280-000
030-2286-000
030-2356-000
030-2357-000
030-2358-000
031-1113-009
031-1113-010
031-1287-000
031-1302-000
031-1303-000
031-1308-000
031-1351-000
031-1351-001
031-1351-002
031-1351-003
031-1352-000
031-1252-000
031-1252-002
031-1352-003
143-1908-000
143-1908-001
143-1909-000
143-1909-001
143-1910-000
143-1910-001
143-1911-000
143-1911-001
143-1912-000
143-1912-001
143-1913-000
143-1913-001
143-1958-000
143-1958-002
143-1960-000
143-1960-002
143-2015-000
143-2015-001
143-2016-000
143-2016-001
143-2065-000
143-2066-000
143-2067-000
143-2068-000
143-2085-000
143-2085-001
143-2086-000
143-2086-001
249-1521-002
249-1522-009
249-1522-010
249-1554-002
249-1604-003
249-1604-004
249-2201-000
249-2202-000
249-5027-013
249-5027-015
249-5027-016
320-0051-000
320-1066-000
320-1066-001
320-1066-002
320-1066-003
320-1066-004
320-1066-005
320-1066-006
249-1521-002
249-1522-010
249-1522-010
249-1554-002
249-1604-003
249-1604-004
249-1521-002
249-1522-010
249-5027-013
249-5027-007
249-5027-016
1250Y
320-000-305
025-1121-001
025-1122-001
025-1123-001
025-1124-001
025-1155-001
025-1156-001
025-1157-001
025-1158-001
025-0000-054
(Conductive Only)
025-0000-055
(Conductive Only)
225-0000-014
225-0094-000
225-0095-000
225-0096-000
225-0097-000
225-0098-000
225-0099-000
225-1058-000
225-0072-000
225-0090-000
225-1013-000
225-1014-000
225-1015-000
225-0000-006
225-0090-000
225-0000-008
143-0000-081
143-0000-077
143-0000-080
143-0000-079
143-0000-078
1247Y
143-0000-079
249-1521-000
249-1522-000
249-1522-002
249-1554-000
249-1604-000
249-1604-001
249-1604-002
249-1882-000
1250Y
249-5027-008
249-5027-017
249-5027-000
249-5027-007
349-0000-306
249-1521-000
249-1522-000
249-1522-002
249-1554-000
249-1604-000
249-1604-001
249-1604-002
249-1882-000
249-1882-002
249-1885-002
249-5027-008
249-5027-017
249-5123-000
249-5123-001
349-1053-000
349-1053-001
349-1053-002
349-1053-003
349-1053-004
3491053-005
349-1053-006
349-1053-007
349-1053-008
349-1053-009
030-1975-009
030-1975-010
030-2259-000
030-2273-000
030-2280-000
030-2286-000
030-2356-000
030-2357-000
030-2358-000
031-1113-009
031-1113-010
031-1287-000
031-1302-000
031-1303-000
031-1308-000
031-0000-343
031-0000-344
021-0144-000
021-0144-001
021-0144-002
021-0144-003
021-0144-004
021-0144-006
021-0144-008
021-0144-011
021-0144-000
021-0144-001
021-0144-002
021-0144-003
021-0144-004
021-0144-006
021-0144-008
021-0144-011
349-0013-000
349-0014-000
349-0015-000
349-0016-000
349-1003-000
349-1009-000
349-0000-000
349-0000-001
349-0000-002
349-0000-001
349-000-301
249-1767-000
249-1767-001
249-1768-000
249-2203-000
249-1767-000
249-1767-001
249-1768-000
249-2203-000
143-1906-000
143-1906-001
143-1907-001
143-1907-001
143-0000-079
Contacts Replacement Coax Termination Kit
Dust Caps
Filler Plugs
Sealing Plugs
Replacement Coax
Body Assembly
Size #1 Coax Contacts
Size #5 Coax Contacts
Size #12 Shielded Contact
Replaceable Inserts
For part numbers not listed, consult ITT Cannon for applicalbe customer-use drawing.
www.ittcannon.com 19
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
ARINC 600 Rack and Panel Connectors BKAD/E/F
ARINC 600 Connector Engaging Sequence
Mating
Sequence Flange
Position With:
No Engagement
PLUG RECEPTACLE
#22
#22
#12
#16
#20
MIN
COAX
(SHELLS FULLY MATED)
(NO ENGAGEMENT)
(RACK SIDE)
1. Varies; See Mil-Spec. (#5 Coax)
2. Size 1 only.
3. Flush head screws are not permitted for connector mounting
as they would position connector incorrectly.
4. Dimension 7 was calculated to provide clearance for
- MCU backplate mat'l thickness of 2.5 mm (.10 in).
- Rack backplate mat'l thickness of 2.5 mm (.10 in).
- Connector mounting pan head screws, MCU 2.0 mm (.08 in).
- Tolerance allowance - 3.2 mm (.13 in.) rack 2.0 mm (.08 in.)
Total - 12.2 (.50 in) (minimum).
(BOX SIDE)
NOTES:
1.245 (31.62)
Nom.
1.110 (28.19)
1.073 (27.25)
1.073 (27.25)
1.023 (25.88)
.800 (22.32)
.748 (18.99)
.805 (20.44)
.741 (18.82)
1.012 (25.70)
.949 (24.10)
1.008 (23.60)
.953 (24.20)
.642 (16.30)
.547 (13.89)
.649 (16.48)
.553 (14.04)
.728 (18.49)
.818 (20.77)
.772 (19.60)
.692 (17.57)
.618 (15.70)
.578 (14.68)
.522 (13.26)
.488 (12.40)
Shells Initially
Engaged
Polarizing Pins
Entering Keys
Contacts Entering
Mating Insulator
#22
#20
#16
#12
Miniature Coax
Miniature Coax
"0" Ring Engagement
(BKAE Only)
Shells Fully
Mated
Contacts Electrically
Engaged
#22
#20
#16
#12
Flange Spacing
in. (mm)
1
1
1
2
2
2
3
4
5
7
1
1
A
E
7
6
www.ittcannon.com 20
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
