P-NS Vishay Thin Film Commercial Thin Film Chip Resistors FEATURES * Lead (Pb)-free or Sn/Pb terminations available * Moisture resistant (SPM) special passivation method * Non-standard values available RoHS* COMPLIANT * Pre-tinned terminations over nickel barrier (Gold available) For applications requiring low noise, stability, low temperature coefficient of resistance, and low voltage coefficient, all VISHAY's proven precision thin film wraparound resistors will meet your exact requirements. Manufactured with the same material and processes as QPL and manufactured in a QPL facility. * Very low noise and voltage coefficient (< - 30 dB, 0.1 ppm/V) * Non-inductive * Laser-trimmed tolerances to 0.02 % * In-lot tracking less than 5 ppm/C * Epoxy bondable termination available CONSTRUCTION SPM Passivation Enhancement Passivated Nichrome Resistive Film Solder coating TYPICAL PERFORMANCE ABS Nickel barrier High Purity Alumina Substrate Adhesion Layer TCR 25 TOL 0.1 STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS Material Absolute TCR 25 ppm/C (available to 10 ppm/C) - 55 C to + 125 C 0.1 % (available to 0.02 %) + 25 C Absolute Tolerance Power Rating See table Voltage Coefficient 0.1 ppm/V typical Working Voltage See table Operating Temperature Range - 55 C to + 125 C Storage Temperature Range - 55 C to + 150 C Noise CASE SIZE CONDITIONS Passivated nichrome < - 35 dB typical POWER RATING - (mW) MAX WORKING VOLTAGE RESISTANCE RANGE - () 0.1 % < 0.1 % 0.1 % < 0.1 % 0.1 % < 0.1 % 0402 50 50 75 75 25 - 75K 250 - 70K 0502 100 100 75 75 20 - 130K 250 - 130K 0505 150 150 75 75 20 - 301K 250 - 301K 0603 150 150 75 75 10 - 175K 250 - 175K 0805 (1), 0705 (1) 250 200 100 100 10 - 475K 250 - 475K 1005 250 250 100 100 10 - 649K 250 - 649K 1010 500 500 150 100 50 - 1M 250 - 1M 1206 400 400 200 200 10 - 1M 250 - 1M 1505 400 400 150 150 10 - 1M 250 - 1M 2208 800 750 150 150 10 - 1.75M 250 - 1M 2010 800 750 200 150 10 - 2M 250 - 1M 200 200 10 - 3M 250 - 1M 2512 1000 750 Note (1) 0705 and 0805 are the same (only use 0805 when ordering) * Pb containing terminations are not RoHS compliant, exemptions may apply Document Number: 60023 Revision: 31-Jul-08 For technical questions, contact: thin-film@vishay.com www.vishay.com 53 SURFACE MOUNT CHIPS Actual Size 0505 Pb-free Available P-NS Commercial Thin Film Chip Resistors Vishay Thin Film DIMENSIONS in inches D W T E CASE SIZE 0402 0502 0505 0603 0805 (1), 0705 (1) 1005 1010 1206 1505 2010 2208 2512 TERM B B B B B B B B B B B B L 0.042 0.008 0.055 0.006 0.055 0.006 0.064 0.006 0.080 0.006 0.105 0.007 0.105 0.007 0.126 0.008 0.155 0.007 0.209 0.009 0.230 0.007 0.259 0.009 W 0.022 0.005 0.025 0.005 0.050 0.005 0.032 0.005 0.050 0.005 0.050 0.005 0.100 0.005 0.063 0.005 0.050 0.005 0.098 0.005 0.075 0.005 0.124 0.005 T 0.012 to 0.033 0.012 to 0.033 0.012 to 0.033 0.020 Max. 0.015 to 0.033 0.015 to 0.033 0.015 to 0.033 0.015 to 0.033 0.015 to 0.033 0.015 to 0.033 0.015 to 0.033 0.015 to 0.033 D 0.010 0.005 0.010 0.005 0.010 0.005 0.012 0.005 0.016 0.008 0.015 0.005 0.015 0.005 0.020 + 0.005, - 0.010 0.015 0.005 0.020 0.005 0.020 0.005 0.020 0.005 E 0.010 0.005 0.015 0.005 0.015 0.005 0.015 0.005 0.015 0.005 0.015 0.005 0.015 0.005 0.020 + 0.005, 0.010 0.015 0.005 0.020 0.005 0.020 0.005 0.020 0.005 DERATING CURVE ENVIRONMENTAL TESTS 100 Environmental Test 10 k R (%) 100 k R (%) Thermal Shock 0.02 0.02 Short Time Overload 0.01 0.01 Low Temperature Operation 0.01 0.01 Resistance to Solder Heat 0.04 0.03 Moisture Resistance 0.02 0.01 High Temperature Exposure 0.03 0.06 Load life (10 000 h, + 70 C) 0.05 0.05 TCR 25 ppm/C 25 ppm/C Note (1) 0705 and 0805 are the same (only use 0805 when ordering) Percent of Rated Power SURFACE MOUNT CHIPS L 80 60 40 20 0 0 70 125 150 Ambient Temperature C GLOBAL PART NUMBER INFORMATION New Global Part Numbering: P-1206E1002BBTS (preferred part number format) P - 1 2 0 GLOBAL MODEL CASE SIZE TCR CHARACTERISTIC P- 0402 0502 0505 0603 0805 1005 1010 1206 1505 2208 2010 2512 Y = 10 ppm/C* D = 15 ppm/C E = 25 ppm/C** H = 50 ppm/C K = 100 ppm/C * > 250 ** > 25 6 E 1 0 0 2 B B RESISTANCE TOLERANCE TERMINATION The first 3 digits are significant figures and the last digit specifies the number of zeros to follow. "R" designates the decimal point. Q = 0.02 %* A = 0.05 %* B = 0.1 % D = 0.5 % F=1% G=2% J=5% B = Wraparound Sn/Pb solder 63 % Sn/37 % Pb w/ nickel barrier G = Wraparound Au over Ni (gold) termination epoxy bondable RoHS compliant - e4 S = Wraparound lead (Pb)-free solder 96.5 % Sn/3.0 % Ag/ 0.5 % Cu RoHS compliant - e1 * For values 1 k Example: 10R0 = 10 1001 = 1 k 1002 = 10 k T S PACKAGING BS = BULK 100 Min 1 Mult WS = WAFFLE 100 Min 1 Mult TAPE AND REEL T0 = 100 Min 100 Mult T1 = 1000 Min 1000 Mult T3 = 300 Min 300 Mult T5 = 500 Min 500 Mult TF = Full Reel TS = 100 Min 1 Mult Historical Part Number Example: P0805H6801BBT P 0805 H 6801 B B T STYLE CASE SIZE TCR CHARACTERISTIC OHMIC VALUE TOLERANCE TERMINATION PACKAGING www.vishay.com 54 For technical questions, contact: thin-film@vishay.com Document Number: 60023 Revision: 31-Jul-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1