600 Watt TRANSIENT VOLTAGE
SUPPRESSOR
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 1
Copyright © 2007
6-20-2007 REV G
WWW.Microsemi .COM
SCOTTSDALE DIVISION
P6KE6.8 thru 200CA, e3
P6KE6.8 thru 200A
DESCRIPTION APPEARANCE
This P6KE series is an economical 600 W Transient Voltage Suppressor (TVS)
for protecting voltage-sensitive components from destruction or degradation. It
is available in both unidirectional and bi-directional configurations as well as
RoHS Compliant (annealed matte-Tin finish) with an e3 suffix added to the part
number. The response time of their clamping action is virtually instantaneous.
As a result, they may also be used effectively for protection from ESD or EFT
per IEC61000-4-2 and IEC61000-4-4 or for inductive switching environments
and induced RF. They can also be used for protecting other sensitive
components from secondary lightning effects per IEC61000-4-5 and class
levels defined herein. Microsemi also offers numerous other TVS products to
meet higher and lower power demands and special applications.
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com T-18
FEATURES APPLIC ATIONS / BENEFITS
• Available in both unidirectional and bidirectional
(add C or CA suffix to part number for bidirectional)
• Optional 100% screening for avionics grade is
available by adding MA prefix to part number for added
100% temperature cycle -55oC to +125oC (10X) as well
as surge (3X) and 24 hours HTRB with post test VZ &
IR (in the operating direction for unidirectional or both
directions for bidirectional)
• Options for screening in accordance with MIL-PRF-
19500 for JAN, JANTX, and JANTXV are available by
adding MQ, MX, or MV prefixes respectively to part
numbers.
• Surface mount equivalents available as SMBJP6KE6.8
to SMBJP6KE200CA or SMBJ5.0 to SMBJ170CA
(consult factory for other surface mount options)
• Moisture classification is Level 1 with no dry pack
required per IPC/JEDEC J-STD-020B
• RoHS Compliant devices available by adding “e3” suffix
• Selections for 6.8 to 200 volts breakdown (VBR)
• Economical TVS series for thru-hole mounting
• Protects sensitive components such as IC’s,
CMOS, Bipolar, BiCMOS, ECL, DTL, T2L, etc.
• Protection from switching transients & induced RF
• Compliant to IEC61000-4-2 and IEC61000-4-4 for
ESD and EFT protection respectively
• Secondary lightning protection per IEC61000-4-5
with 42 Ohms source impedance:
Class 1: P6KE6.8 to P6KE130A or CA
Class 2: P6KE6.8 to P6KE68A or CA
Class 3: P6KE6.8 to P6KE36A or CA
Class 4: P6KE6.8 to P6KE18A or CA
• Secondary lightning protection per IEC61000-4-5
with 12 Ohms source impedance:
Class 1: P6KE6.8 to P6KE43A or CA
Class 2: P6KE6.8 to P6KE22A or CA
MAXIMUM RAT ING S MECHANICAL AND PACKAGING
• Peak Pulse Power dissipation at 25oC: 600 watts at
10/1000 μs (also see Fig 1,2, and 3).
• Impulse repetition rate (duty factor): 0.01%
• t
clamping (0 volts to V(BR) min.): < 100 ps theoretical for
unidirectional and < 5 ns for bidirectional
• Operating and Storage temperature: -65oC to +150oC
• Thermal Resistance: 25 oC/W at 3/8 inch (10 mm) lead
length from body, or 85°C/W junction to ambient when
mounted on FR4 PC board with 4 mm2 copper pads (1
oz) and track width 1 mm, length 25 mm
• Steady-State Power: 5 watts @ TL=25oC 3/8 inch (10
mm) from body, or 1.47 W when mounted on FR4 PC
board described for thermal resistance
• Forward Voltage at 25oC: 3.5 Volts maximum @ 100
Amp peak impulse of 8.3 ms half-sine wave
(unidirectional only)
• Solder temperatures: 260oC for 10 s (maximum)
• CASE: Void-free transfer molded thermosetting
epoxy body meeting UL94V-0
• FINISH: Tin-Lead or RoHS Compliant annealed
matte-Tin plating readily solderable per MIL-STD-
750, method 2026
• MARKING: Body marked with part number
• POLARITY: Band denotes cathode. Bidirectional
not marked
• WEIGHT: 0.7 grams (approximate)
• TAPE & REEL option: Standard per EIA-296 (add
“TR” suffix to part number)
• See package dimensions on last page
600 Watt TRANSIENT VOLTAGE
SUPPRESSOR
WWW.Microsemi .COM
SCOTTSDALE DIVISION
P6KE6.8 thru 200CA, e3
P6KE6.8 thru 200A
ELECTRICAL CHARACTERISTICS
BREAKDOWN VOLTAGE
V(BR)
Min. Nom. Max.
TEST
CURRENT
I(BR)
RATED
STANDOFF
VOLTAGE
VWM
MAX
STANDBY
CURRENT
ID @ VWM
MAX
CLAMPING
VOLTAGE
VC @ IPP
PEAK PULSE
CURRENT
IPP
TEMPERATURE
COEFFICIANT
of V(BR)
αV(BR)
MICROSEMI
PART
NUMBER
VDC VDC VDC mA V μA V A
% / oC
P6KE6.8
P6KE6.8A
P6KE7.5
P6KE7.5A
6.12
6.45
6.75
7.13
6.8
6.8
7.5
7.5
7.48
7.14
8.25
7.88
10
10
10
10
5.5
5.8
6.05
6.4
1000
1000
500
500
10.8
10.5
11.7
11.3
56
57
51
53
.057
.057
.061
.061
P6KE8.2
P6KE8.2A
P6KE9.1
P6KE9.1A
7.38
7.79
8.19
8.65
8.2
8.2
9.1
9.1
9.02
8.61
10
9.55
10
10
1
1
6.63
7.02
7.37
7.78
200
200
50
50
12.5
12.1
13.8
13.4
48
50
44
45
.065
.065
.068
.068
P6KE10
P6KE10A
P6KE11
P6KE11A
9.0
9.5
9.9
10.5
10
10
11
11
11
10.5
12.1
11.6
1
1
1
1
8.1
8.55
8.92
9.4
10
10
5
5
15
14.5
16.2
15.6
40
41
37
38
.073
.073
.075
.075
P6KE12
P6KE12A
P6KE13
P6KE13A
10.8
11.4
11.7
12.4
12
12
13
13
13.2
12.6
14.3
13.7
1
1
1
1
9.72
10.2
10.5
11.1
5
5
5
5
17.3
16.7
19
18.2
35
36
32
33
.078
.078
.081
.081
P6KE15
P6KE15A
P6KE16
P6KE16A
13.5
14.3
14.4
15.2
15
15
16
16
16.5
15.8
17.6
16.8
1
1
1
1
12.1
12.8
12.9
13.6
1
1
1
1
22
21.2
23.5
22.5
27
28
26
27
.084
.084
.086
.086
P6KE18
P6KE18A
P6KE20
P6KE20A
16.2
17.1
18
19
18
18
20
20
19.8
18.9
22
21
1
1
1
1
14.5
15.3
16.2
17.1
1
1
1
1
26.5
25.2
29.1
27.7
23
24
21
22
.088
.088
.090
.090
P6KE22
P6KE22A
P6KE24
P6KE24A
19.8
20.9
21.6
22.8
22
22
24
24
24.2
23.1
26.4
25.2
1
1
1
1
17.8
18.8
19.4
20.5
1
1
1
1
31.9
30.6
34.7
33.2
19
20
17
18
.092
.092
.094
.094
P6KE27
P6KE27A
P6KE30
P6KE30A
24.3
25.7
27
28.5
27
27
30
30
29.7
28.4
33
31.5
1
1
1
1
21.8
23.1
24.3
25.6
1
1
1
1
39.1
37.5
43.5
41.4
15
16
14
14.4
.096
.096
.097
.097
P6KE33
P6KE33A
P6KE36
P6KE36A
29.7
31.4
32.4
34.2
33
33
36
36
36.3
34.7
39.6
37.8
1
1
1
1
26.8
28.2
29.1
30.8
1
1
1
1
47.7
45.7
52
49.9
12.6
13.2
11.6
12
.098
.098
.099
.099
P6KE39
P6KE39A
P6KE43
P6KE43A
35.1
37.1
38.7
40.9
39
39
43
43
42.9
41
47.3
45.2
1
1
1
1
31.6
33.3
34.8
36.8
1
1
1
1
56.4
53.9
61.9
59.3
10.6
11.2
9.6
10.1
.100
.100
.101
.101
P6KE47
P6KE47A
P6KE51
P6KE51A
42.3
44.7
45.9
48.5
47
47
51
51
51.7
49.4
56.1
53.6
1
1
1
1
38.1
40.2
41.3
43.6
1
1
1
1
67.8
64.8
73.5
70.1
8.8
9.3
8.2
8.6
.101
.101
.102
.102
P6KE56
P6KE56A
P6KE62
P6KE62A
50.4
53.2
55.8
58.9
56
56
62
62
61.6
58.8
68.2
65.1
1
1
1
1
45.4
47.8
50.2
53
1
1
1
1
80.5
77
89
85
7.4
7.8
6.8
7.1
.103
.103
.104
.104
P6KE68
P6KE68A
P6KE75
P6KE75A
61.2
64.6
67.5
71.3
68
68
75
75
74.8
71.4
82.5
78.8
1
1
1
1
55.1
58.1
60.7
64.1
1
1
1
1
98
92
108
103
6.1
6.5
5.5
5.8
.104
.104
.105
.105
P6KE82
P6KE82A
P6KE91
P6KE91A
73.8
77.9
81.9
86.5
82
82
91
91
90.2
86.1
100
95.5
1
1
1
1
66.4
70.1
73.7
77.8
1
1
1
1
118
113
131
125
5.1
5.3
4.5
4.8
.105
.105
.106
.106
Microsemi
Scottsdale Division
Page 2
Copyright © 2007
6-20-2007 REV G
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
600 Watt TRANSIENT VOLTAGE
SUPPRESSOR
WWW.Microsemi .COM
SCOTTSDALE DIVISION
P6KE6.8 thru 200CA, e3
P6KE6.8 thru 200A
BREAKDOWN VOLTAGE
V(BR)
Min. Nom. Max.
TEST
CURRENT
I(BR)
RATED
STANDOFF
VOLTAGE
VWM
MAX
STANDBY
CURRENT
ID @ VWM
MAX
CLAMPING
VOLTAGE
VC @ IPP
PEAK PULSE
CURRENT
IPP
TEMPERATURE
COEFFICIANT
of V(BR)
αV(BR)
MICROSEMI
PART
NUMBER
VDC VDC VDC mA V μA V A
% / oC
P6KE100
P6KE100A
P6KE110
P6KE110A
90
95
99
105
100
100
110
110
110
105
121
116
1
1
1
1
81
85.5
89.2
94
1
1
1
1
144
137
158
152
4.2
4.4
3.8
3.4
.106
.106
.107
.107
P6KE120
P6KE120A
P6KE130
P6KE130A
108
114
117
124
120
120
130
130
132
126
143
137
1
1
1
1
97.2
102
105
111
1
1
1
1
173
165
187
179
3.5
3.6
3.2
3.3
.107
.107
.107
.107
P6KE150
P6KE150A
P6KE160
P6KE160A
135
143
144
152
150
150
160
160
165
158
176
168
1
1
1
1
121
128
130
136
1
1
1
1
215
207
230
219
2.8
2.9
2.6
2.7
.108
.108
.108
.108
P6KE170
P6KE170A
P6KE180
P6KE180A
153
161
162
171
170
170
180
180
187
179
198
189
1
1
1
1
138
145
146
154
1
1
1
1
244
234
258
246
2.5
2.6
2.3
2.4
.108
.108
.108
.108
P6KE200
P6KE200A
180
190
200
200
220
210
1
1
162
171
1
1
287
274
2.1
2.2
.108
.108
Consult factory for higher voltages.
For Bidirectional Construction, indicate a C or CA suffix after part number, i.e. P6KE200CA. Capacitance will be one-half that shown in Figure 4.
SYMBOLS & DEFINITI ONS
Symbol Definition Symbol Definition
VWM Working Peak (Standoff) Voltage IPP Peak Pulse Current
PPP Peak Pulse Power VC Clamping Voltage
V(BR) Breakdown Voltage I(BR) Breakdown Current for V(BR)
ID Standby Current
GRAPHS
50
30
10
5.0
3.0
2.0
1.0
0.5
0.3
0.2
0.1
PPP – Peak Pulse Power – kW
TL = 25oC
0.1 0.2 0.5 1.0 2.0 5.0 10 20 50 100 200 1000 10,000 Test waveform parameters: tr=10 μs, tw=1000 μs
tw – Pulse Width - μs FIGURE 2
FIGURE 1 Pulse Waveform for
Microsemi
Scottsdale Division
Page 3
Peak Pulse Power vs. Pulse Time Exponential Surge
Copyright © 2007
6-20-2007 REV G
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
600 Watt TRANSIENT VOLTAGE
SUPPRESSOR
WWW.Microsemi .COM
SCOTTSDALE DIVISION
P6KE6.8 thru 200CA, e3
P6KE6.8 thru 200A
C – Capacitance - Picofarads
TL Lead Temperature oC V(BR) - Breakdown Voltage – Volts
Peak Pulse Power (PPP) or continuous
Power in Percent of 25
o
C
Rating
FIGURE 3 - Derating Curve FIGURE 4 - P6KE Typical Capacitance vs. Breakdown Voltage
PACKAGE DIMEN SIONS
T-18
Microsemi
Scottsdale Division
Page 4
Copyright © 2007
6-20-2007 REV G
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
