US
UK
Taiwan
China
Singapore
+1-847-639-6400 sales@coilcraft.com
+44-1236-730595 sales@coilcraft-europe.com
+886-2-2264 3646 sales@coilcraft.com.tw
+86-21-6218 8074 sales@coilcraft.com.cn
+ 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Chip Inductors
–
0805HS (2012)
Document 159-1
Inductance2 Percent
SRF min5 DCR max6 Irms7 Color
Part number1 (nH) tolerance3 Q min4 (MHz) (Ohms) (mA) code
0805HS-030TJL_ 3.3
@ 250 MHz 5 50
@
1500 MHz 7900 0.08 600 Black
0805HS-060TJL_ 6.8
@ 250 MHz 5 50
@
1000 MHz 5500 0.11 600 Brown
0805HS-080TJL_ 8.2
@ 250 MHz 5 50
@
1000 MHz 4700 0.12 600 Red
0805HS-100TJL_ 10
@ 250 MHz 5 60
@
500 MHz 4200 0.10 600 Blue
0805HS-120TJL_ 12
@ 250 MHz 5 50
@
500 MHz 4000 0.15 600 Orange
0805HS-150TJL_ 15
@ 250 MHz 5 50
@
500 MHz 3400 0.17 600 Yellow
0805HS-180TJL_ 18
@ 250 MHz 5 50
@
500 MHz 3300 0.20 600 Green
0805HS-220T_L_ 22
@ 250 MHz 5,2 55
@
500 MHz 2600 0.22 500 Blue
0805HS-270T_L_ 27
@ 250 MHz 5,2 55
@
500 MHz 2500 0.25 500 Violet
0805HS-330T_L_ 33
@ 250 MHz 5,2 60
@
500 MHz 2050 0.27 500 Gray
0805HS-390T_L_ 39
@ 250 MHz 5,2 60
@
500 MHz 2000 0.29 500 White
0805HS-470T_L_ 47
@ 200 MHz 5,2 60
@
500 MHz 1650 0.31 500 Black
0805HS-560T_L_ 56
@ 200 MHz 5,2,1 60
@
500 MHz 1550 0.34 500 Brown
0805HS-680T_L_ 68
@ 200 MHz 5,2,1 60
@
500 MHz 1450 0.38 500 Red
0805HS-820T_L_ 82
@ 150 MHz 5,2,1 65
@
500 MHz 1300 0.42 400 Orange
0805HS-101T_L_ 100
@ 150 MHz 5,2,1 65
@
500 MHz 1200 0.46 400 Yellow
0805HS-121T_L_ 120
@ 150 MHz 5,2,1 50
@
250 MHz 1100 0.51 400 Green
0805HS-151T_L_ 150
@ 100 MHz 5,2,1 50
@
250 MHz 920 0.56 400 Blue
0805HS-181T_L_ 180
@ 100 MHz 5,2,1 50
@
250 MHz 870 0.64 400 Violet
0805HS-221T_L_ 220
@ 100 MHz 5,2 50
@
250 MHz 850 0.70 400 Gray
1. When ordering, specify tolerance, termination and packaging codes:
0805HS-221TJLC
Tolerance: F = 1% G = 2% J = 5%
(Table shows stock tolerances in bold.)
Termination: L = RoHS compliant silver-palladium-platinum-glass frit.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic
tape (2000 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter C instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic
tape (7500 parts per full reel).
2. Inductance measured using a Coilcraft SMD-A fixture in an Agilent/HP
4286A impedance analyzer with Coilcraft-provided correlation pieces.
3. Tolerances in bold are stocked for immediate shipment.
4. Q measured using an Agilent/HP 4291A with an Agilent/HP 16193 test
fixture.
5. SRF measured using an Agilent/HP 8720D network analyzer and a
Coilcraft SMD-D test fixture.
6. DCR measured on a Cambridge Technology micro-ohmmeter and a
Coilcraft CCF858 test fixture.
7. Current that causes a 15°C temperature rise from 25°C ambient.
8. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Ceramic body and wire wound construction provide highest
SRFs available in 0805 size. These ultra-compact inductors
provide exceptional Q values, even at high frequencies.
Free evaluation samples are available by contacting
Coilcraft or ordering them on-line at www.coilcraft.com.
Core material Ceramic
Terminations RoHS compliant silver-palladium-platinum-glass frit.
Other terminations available at additional cost.
Weight 9.8 – 10.9 mg
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+100°C with derated current
Storage temperature Component: –40°C to +100°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Temperature Coefficient of Inductance (TCL) +25 to +125 ppm/°C
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
One per billion hours / one billion hours, calculated per Telcordia SR-332
Packaging 2000/7″ reel; 750/13″ reel Paper tape: 8 mm wide,
0.23 mm thick, 4 mm pocket spacing, 1.3 mm pocket depth
PCB washing Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.
Document 159-1 Revised 01/18/12
US
UK
Taiwan
China
Singapore
+1-847-639-6400 sales@coilcraft.com
+44-1236-730595 sales@coilcraft-europe.com
+886-2-2264 3646 sales@coilcraft.com.tw
+86-21-6218 8074 sales@coilcraft.com.cn
+ 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
0805HS Series (2012)
Document 159-2
Document 159-2 Revised 01/18/12
Typical Q vs Frequency Typical L vs Frequency
A B C
max max max E F G H I J
0.085 0.060 0.057 0.050 0.020 0.040 0.070 0.040 0.030 inches
2,16 1,52 1,45 1,27 0,51 1,02 1,78 1,02 0,76 mm
1000
100
10
10 100
Frequency (MHz)
Inductance (nH)
1000
1
220 nH
100 nH
39 nH
15 nH
3.3 nH
12 nH
6.8 nH
3.3 nH
22 nH
39 nH
68 nH
120 nH
100
90
80
70
60
50
40
30
20
10
0
10 100
Frequency (MHz)
Q Factor
1000 10000
J
H
A
B
overall
F
G
E
terminal
F
C
Terminal wraparound:
approx 0.015/0,38 both ends
Recommended
Land Pattern
I
I
Irms Derating
-40 -20 020406080100 120
Ambient temperature (°C)
120
110
100
90
80
70
60
50
40
30
20
10
0
Percent of rated rmsI
25°C
Note: Height dimension (C) is before optional solder application. For maximum
height dimension including solder, add 0.006 in / 0,152 mm.
