MANUFACTURER CATEGORY
SERIES
PACKAGE
VOLTAGE
CLASS REV.DATE
ECLIPTEK CORP. OSCILLATOR EP35 CERAMIC 5.0V OS89 10/11
EP35 Series
• Programmable Crystal Oscillators
• HCMOS/TTL Output
• +5.0V Supply Voltage
• Tri-State and Power Down Options
• 4 Pad Ceramic SMD Package
• RoHS Compliant (Pb-Free)
OSCILLATOR
EP35
ELECTRICAL SPECIFICATIONS
1.000MHz to 125.000MHz
-20°C to +70°C or -40°C to +85°C
-55°C to +125°C
5.0VDC ±10%
45mA Maximum (Unloaded)
30mA Maximum (Pin 1=Ground)
50µA Maximum (Pin 1=Ground)
±100ppm or ±50ppm Maximum
2.4VDC Minimum IOH=-16mA
VDD-0.4VDC Minimum IOH=-16mA
0.4VDC Maximum IOL=+16mA
4 nSeconds Max (0.8VDC to 2.0VDC)
4 nSec Max (20% to 80% of waveform)
50 ±10(%)
50 ±5(%)
50pF CMOS Load Maximum
15pF CMOS Load Maximum
10TTL Load Maximum
5TTL Load Maximum
Tri-State
Power Down
Enables Output
Disable Output: High Impedance
Disable Output: Logic Low
±5ppm / year Maximum
10 mSeconds Maximum
±250pSec Maximum, ±100pSec Typical
±100pSec Maximum, ±50pSec Typical
±50pSec Maximum
±30pSec Maximum
Inclusive of all conditions: Calibration Tolerance at 25°C,
Frequency Stability over the Operating Temperature Range,
Supply Voltage Change, Output Load Change, First Year
Aging at 25°C, Shock, and Vibration
w/TTL Load
w/CMOS Load
w/TTL Load or w/CMOS Load
w/TTL Load
w/CMOS Load
at 1.4VDC w/TTL Load; at 50% of waveform w/CMOS Load
at 1.4VDC w/TTL Load (<27.000MHz only), or
at 50% of waveform w/CMOS Load (<50.000MHz Only)
<50.000MHz
>50.000MHz
<40.000MHz
>40.000MHz
TS
PD
VIH: No Connection or ≥2.0VDC
VIL: (TS Option) <0.8VDC
VIL: (PD Option) <0.8VDC
<33.000MHz
>33.000MHz
<33.000MHz
>33.000MHz
Frequency Range
Operating Temperature Range
Storage Temperature Range
Supply Voltage (VDD)
Input Current
Disable Current (TS Option)
Standby Current (PD Option)
Frequency Tolerance / Stability
Output Voltage Logic High (VOH)
Output Voltage Logic Low (VOL)
Rise Time / Fall Time
Duty Cycle
Load Drive Capability /
Output Type-HCMOS
Load Drive Capability /
Output Type-TTL
Output Control Function
Output Control Function Input Voltage
Aging (at 25°C)
Start Up Time
Period Jitter: Absolute
Period Jitter: One Sigma
800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice.
H 1.3
L 5.0
W 3.2
MANUFACTURER CATEGORY
SERIES
PACKAGE
VOLTAGE
CLASS REV.DATE
ECLIPTEK CORP. OSCILLATOR EP35 CERAMIC 5.0V OS89 10/11
EP35 00 ET T TS L - 24.000M TR
FREQUENCY TOLERANCE / STABILITY
00 = ±100ppm Maximum
45 = ±50ppm Maximum
OPERATING TEMPERATURE RANGE
Blank = -20°C to +70°C
ET = -40°C to +85°C
DUTY CYCLE
Blank = 50 ±10(%)
T = 50 ±5(%)
PART NUMBERING GUIDE
MECHANICAL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
TAPE AND REEL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
MARKING SPECIFICATIONS
ENVIRONMENTAL/MECHANICAL SPECIFICATIONS
SUGGESTED SOLDER PAD LAYOUT
ALL DIMENSIONS IN MILLIMETERS
Tolerances = ±0.1
Pin 1: Tri-State or Power Down
Pin 2: Case Ground
Pin 3: Output
Pin 4: Supply Voltage
800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice.
AVAILABLE OPTIONS
Blank = Bulk
TR = Tape & Reel
FREQUENCY
OUTPUT TYPE
L = TTL
C = CMOS
OUTPUT CONTROL FUNCTION
TS = Tri-State
PD = Power Down
Characteristic Specification
Fine Leak Test MIL-STD-883, Method 1014, Condition A
Gross Leak Test MIL-STD-883, Method 1014, Condition C
Mechanical Shock MIL-STD-202, Method 213, Condition C
Vibration MIL-STD-883, Method 2007, Condition A
Solderability MIL-STD-883, Method 2002
Temperature Cycling MIL-STD-883, Method 1010
Resistance to Soldering Heat MIL-STD-202, Method 210
Resistance to Solvents MIL-STD-202, Method 215
N
O
P
Q
S Width
T Depth
(Tape Slot in Core
for Tape Start)
R
(Access Hole
at Slot Location)
U
W
V
N O P Q R
1.5 MIN 50 MIN 20.2 MIN 13.0 ±0.2 40 MIN
S T U V W
QTY/REEL
2.5 MIN 10 MIN 22.4 MAX 180 MAX 16.4 +2.0/-0.0 1,000
REEL
TAPE
A B C D E F
16.0 ±0.3 7.5 ±0.1 1.50 MIN 4.0 ±0.1 2.0 ±0.1 8.0 ±0.1
G H I J K L M
A0 1.5 +0.1/-0.0 1.75 ±0.10 B0 0.60 MAX 0.10 MAX K0
Note: Compliant to EIA-481
D
E
FG
HK
L
I
M
J
C
A
Direction of Unreeling
B
MARKING
ORIENTATION
Line 1: E XX.XXX
Frequency in MHz (5 Digits Maximum + Decimal)
Ecliptek Designator
