1. Product profile
1.1 General description
130 W LDMOS transistor intended for pulsed applications in the 0.5 GHz to 1.4 GHz
range.
1.2 Features and benefits
Easy power control
Integrated dual side ESD protection
High flexibility with respect to pulse formats
Excellent ruggedness
High efficiency
Excellent thermal stability
Designed for broadband operation (0.5 GHz to 1.4 GHz)
Compliant to Directive 2002/95/EC, regarding Restriction of Hazardous Substances
(RoHS)
1.3 Applications
Amplifiers for pulsed applications in the 0.5 GHz to 1.4 GHz frequency range
BLL8H0514L-130;
BLL8H0514LS-130
LDMOS driver transistor
Rev. 3 — 1 September 2015 Product data sheet
Table 1. Application information
Typical RF performance at Tcase =25
C; IDq = 50 mA; in a class-AB application circuit.
Test signal f tpVDS PLGpRLin DPdroop(pulse) trtf
(MHz) (s) (%) (V) (W) (dB) (dB) (%) (dB) (ns) (ns)
pulsed RF 960 to 1215 128 10 50 130 19 10 54 0 15 8
1200 to 1400 300 10 50 130 17 10 50 0 15 8
BLL8H0514L-130_0514LS-130#3 All information provided in this document is subject to legal disclaimers. © Ampleon The Netherlands B.V. 2015. All rights reserved.
Product data sheet Rev. 3 — 1 September 2015 2 of 13
BLL8H0514L(S)-130
LDMOS driver transistor
2. Pinning information
[1] Connected to flange.
3. Ordering information
4. Limiting values
[1] Continuous use at maximum temperature will affect the reliability, for details refer to the on-line MTF
calculator.
Table 2. Pinning
Pin Description Simplified outline Graphic symbol
BLL8H0514L-130 (SOT1135A)
1drain
2gate
3source [1]
BLL8H0514LS-130 (SOT1135B)
1drain
2gate
3source [1]
1
2
3
sym112
1
3
2
2
3
1
sym112
1
3
2
Table 3. Ordering information
Type number Package
Name Description Version
BLL8H0514L-130 - flanged ceramic package; 2 mounting holes; 2 leadsSOT1135A
BLL8H0514LS-130 - earless flanged ceramic package; 2 leads SOT1135B
Table 4. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol Parameter Conditions Min Max Unit
VDS drain-source voltage - 100 V
VGS gate-source voltage 6+13V
Tstg storage temperature 65 +150 C
Tjjunction temperature [1] - 225 C
BLL8H0514L-130_0514LS-130#3 All information provided in this document is subject to legal disclaimers. © Ampleon The Netherlands B.V. 2015. All rights reserved.
Product data sheet Rev. 3 — 1 September 2015 3 of 13
BLL8H0514L(S)-130
LDMOS driver transistor
5. Thermal characteristics
6. Characteristics
Table 5. Thermal characteristics
Symbol Parameter Conditions Typ Unit
Zth(j-c) transient thermal impedance from
junction to case
Tcase =85C; PL=130W
tp = 100 s; = 10 % 0.17 K/W
tp = 200 s; = 10 % 0.22 K/W
tp = 300 s; = 10 % 0.25 K/W
tp = 100 s; = 20 % 0.23 K/W
tp = 1 ms; = 10 % 0.36 K/W
Table 6. DC characteristics
Tj = 25
C; per section unless otherwise specified.
Symbol Parameter Conditions Min Typ Max Unit
V(BR)DSS drain-source breakdown voltage VGS = 0 V; ID= 630 mA 100 - - V
VGS(th) gate-source threshold voltage VDS = 10 V; ID= 135 mA 1.3 1.8 2.25 V
IDSS drain leakage current VGS = 0 V; VDS =50V - - 1.4 A
IDSX drain cut-off current VGS =V
GS(th) + 3.75 V;
VDS =10V
15.8 18 - A
IGSS gate leakage current VGS =11V; V
DS = 0 V - - 140 nA
gfs forward transconductance VDS = 10 V; ID= 135 mA 806 - 1578 mS
RDS(on) drain-source on-state resistance VGS =V
GS(th) + 6.25 V;
ID= 135 mA
-200275m
Table 7. RF characteristics
Test signal: pulsed RF; tp = 300
s;
= 10 %; RF performance at VDS =50V; I
Dq =50mA;
f = 1.2 GHz to 1.4 GHz; Tcase =25
C; unless otherwise specified, in a class-AB production
test circuit.
Symbol Parameter Conditions Min Typ Max Unit
VDS drain-source voltage PL=130W - - 50 V
Gppower gain PL= 130 W 15 17 - dB
RLin input return loss PL=130W - 10 7dB
Ddrain efficiency PL=130W 45 50 - %
Pdroop(pulse) pulse droop power PL= 130 W - 0 0.3 dB
trrise time PL= 130 W - 20 50 ns
tffall time PL=130W - 6 50 ns
BLL8H0514L-130_0514LS-130#3 All information provided in this document is subject to legal disclaimers. © Ampleon The Netherlands B.V. 2015. All rights reserved.
Product data sheet Rev. 3 — 1 September 2015 4 of 13
BLL8H0514L(S)-130
LDMOS driver transistor
7. Application information
7.1 Ruggedness in class-AB operation
The BLL8H0514L-130 and BLL8H0514LS-130 are capable of withstanding a load
mismatch corresponding to VSWR = 5 : 1 through all phases under the following
conditions: VDS =50V; I
Dq =50mA; P
L= 130 W; f = 1.2 GHz to 1.4 GHz; tp= 300 s;
=10%.
7.2 Impedance information
Table 8. Typical impedance
f ZSZL
(MHz) () ()
1200 1.21 j3.44 2.40 j0.63
1300 1.56 j4.49 2.30 j0.87
1400 2.21 j4.86 2.00 j1.71
Fig 1. Definition of transistor impedance
001aaf059
drain
ZL
ZS
gate
BLL8H0514L-130_0514LS-130#3 All information provided in this document is subject to legal disclaimers. © Ampleon The Netherlands B.V. 2015. All rights reserved.
Product data sheet Rev. 3 — 1 September 2015 5 of 13
BLL8H0514L(S)-130
LDMOS driver transistor
7.3 Performance curves
VDS = 50 V; IDq = 50 mA; tp = 300 s; = 10 %. VDS = 50 V; IDq = 50 mA; tp = 300 s; = 10 %.
Fig 2. Power gain and drain efficiency as function of
frequency; typical values
Fig 3. Input return loss as a function of frequency;
typical values
001aam262
f (GHz)
1.15 1.451.351.25
8
12
4
16
20
Gp
(dB)
ηD
(%)
0
30
40
20
50
60
10
Gp
ηD
001aam263
f (GHz)
1.15 1.451.351.25
8
12
4
16
20
RLin
(dB)
0
VDS = 50 V; IDq = 50 mA; tp = 300 s; = 10 %.
(1) f = 1.2 GHz
(2) f = 1.3 GHz
(3) f = 1.4 GHz
VDS = 50 V; IDq = 50 mA; tp = 300 s; = 10 %.
(1) f = 1.2 GHz
(2) f = 1.3 GHz
(3) f = 1.4 GHz
Fig 4. Power gain as a function of output power;
typical values
Fig 5. Drain efficiency as a function of output power;
typical values
PL (W)
016012040 80
001aam264
8
12
4
16
20
Gp
(dB)
0
(1)
(2)
(3)
PL (W)
016012040 80
001aam265
30
40
20
50
60
ηD
(%)
10
(1)
(2)
(3)
BLL8H0514L-130_0514LS-130#3 All information provided in this document is subject to legal disclaimers. © Ampleon The Netherlands B.V. 2015. All rights reserved.
Product data sheet Rev. 3 — 1 September 2015 6 of 13
BLL8H0514L(S)-130
LDMOS driver transistor
8. Test information
VDS = 50 V; IDq = 50 mA; tp = 300 s; = 10 %.
(1) f = 1.2 GHz
(2) f = 1.3 GHz
(3) f = 1.4 GHz
Fig 6. Output power as a function of input power; typical values
Pi (W)
04312
001aam266
80
40
120
160
PL
(W)
0
(1)
(2)
(3)
Printed-Circuit Board (PCB) material: Duroid 6006 with r= 6.15 and thickness = 0.64 mm.
See Table 9 for list of components.
Fig 7. Component layout
001aam267
C12
C7
R1
C5
C3
C2
C1
C6
C4
C11
C10
C13
R2 C9
C8
BLL8H0514L-130_0514LS-130#3 All information provided in this document is subject to legal disclaimers. © Ampleon The Netherlands B.V. 2015. All rights reserved.
Product data sheet Rev. 3 — 1 September 2015 7 of 13
BLL8H0514L(S)-130
LDMOS driver transistor
[1] American Technical Ceramics type 700A or capacitor of same quality.
[2] American Technical Ceramics type 100A or capacitor of same quality.
[3] American Technical Ceramics type 100B or capacitor of same quality.
Table 9. List of components
See Figure 7 for component layout.
Component Description Value Remarks
C1 multilayer ceramic chip capacitor 10 F, 50 V
C2, C11 multilayer ceramic chip capacitor 1 nF [1]
C3, C4, C6, C9, C10 multilayer ceramic chip capacitor 100 pF [2]
C5, C7, C8 multilayer ceramic chip capacitor 43 pF [2]
C12 electrolytic capacitor 220 F, 63 V
C13 multilayer ceramic chip capacitor 1 nF [3] fitted vertically in
series with R2
R1 SMD resistor 10 SMD 0603
R2 wirewound lead resistor 2.61 , 0.25 W fitted in series
with C13
BLL8H0514L-130_0514LS-130#3 All information provided in this document is subject to legal disclaimers. © Ampleon The Netherlands B.V. 2015. All rights reserved.
Product data sheet Rev. 3 — 1 September 2015 8 of 13
BLL8H0514L(S)-130
LDMOS driver transistor
9. Package outline
Fig 8. Package outline SOT1135A
References
Outline
version
European
projection Issue date
IEC JEDEC JEITA
SOT1135A
sot1135a_po
09-10-12
09-12-14
Unit(1)
mm
max
nom
min
4.65
3.76
5.26
5.00
9.65
9.40
9.65
9.40
9.65
9.40
9.65
9.40
19.94
18.92
3.30
2.92
15.24 0.51
A
Dimensions
Note
1. millimeter dimensions are derived from the original inch dimensions.
2. dimension is measured 0.030 inch (0.76 mm) from the body.
Flanged ceramic package; 2 mounting holes; 2 leads SOT1135A
bc
0.18
0.10
DD
1EE
1F
1.14
0.89
HpQ
1.70
1.45
qU
1
20.45
20.19
U2
9.91
9.65
w1
0.25
w2
inches
max
nom
min
0.183
0.148
0.207
0.197
0.38
0.37
0.38
0.37
0.38
0.37
0.38
0.37
0.785
0.745
0.130
0.115
0.6 0.02
0.007
0.004
0.045
0.035
0.067
0.057
0.805
0.795
0.39
0.38
0.01
A
D
F
D1
c
E
E1
Q
B
C
A
q
U1
U2
b
2
1
3
Hp
AB
w1
Cw2
0510 mm
scale
BLL8H0514L-130_0514LS-130#3 All information provided in this document is subject to legal disclaimers. © Ampleon The Netherlands B.V. 2015. All rights reserved.
Product data sheet Rev. 3 — 1 September 2015 9 of 13
BLL8H0514L(S)-130
LDMOS driver transistor
Fig 9. Package outline SOT1135B
References
Outline
version
European
projection Issue date
IEC JEDEC JEITA
SOT1135B
sot1135b_po
09-10-12
09-12-14
Unit(1)
mm
max
nom
min
4.65
3.76
5.26
5.00
9.65
9.40
9.65
9.40
9.65
9.40
9.65
9.40
19.94
18.92
A
Dimensions
Note
1. millimeter dimensions are derived from the original inch dimensions.
2. dimension is measured 0.030 inch (0.76 mm) from the body.
Earless flanged ceramic package; 2 leads SOT1135B
bc
0.18
0.10
DD
1EE
1F
1.14
0.89
HQ
1.70
1.45
U1
9.91
9.65
U2
9.91
9.65
w2
0.51
inches
max
nom
min
0.183
0.148
0.207
0.197
0.38
0.37
0.38
0.37
0.38
0.37
0.38
0.37
0.785
0.745
0.007
0.004
0.045
0.035
0.067
0.057
0.39
0.38
0.39
0.38
0.02
c
E
E1
Q
U1
U2
b
2
1
H
Dw2
0510 mm
scale
A
D
F
D1
3
D
BLL8H0514L-130_0514LS-130#3 All information provided in this document is subject to legal disclaimers. © Ampleon The Netherlands B.V. 2015. All rights reserved.
Product data sheet Rev. 3 — 1 September 2015 10 of 13
BLL8H0514L(S)-130
LDMOS driver transistor
10. Handling information
11. Abbreviations
12. Revision history
CAUTION
This device is sensitive to ElectroStatic Discharge (ESD). Observe precautions for handling
electrostatic sensitive devices.
Such precautions are described in the ANSI/ESD S20.20, IEC/ST 61340-5, JESD625-A or
equivalent standards.
Table 10. Abbreviations
Acronym Description
ESD ElectroStatic Discharge
LDMOS Laterally Diffused Metal-Oxide Semiconductor
MTF Median Time to Failure
SMD Surface Mounted Device
VSWR Voltage Standing-Wave Ratio
Table 11. Revision history
Document ID Release date Data sheet status Change notice Supersedes
BLL8H0514L-130_0514LS-130#3 20150901 Product data sheet - BLL8H0514L-130_0514LS-130
#2
Modifications: •The format of this document has been redesigned to comply with the new identity
guidelines of Ampleon.
•Legal texts have been adapted to the new company name where appropriate.
BLL8H0514L-130_0514LS-130#2 20150209 Product data sheet - BLL8H0514L-130_0514LS-130
#1
BLL8H0514L-130_0514LS-130#1 20140930 Objective data sheet - -
BLL8H0514L-130_0514LS-130#3 All information provided in this document is subject to legal disclaimers. © Ampleon The Netherlands B.V. 2015. All rights reserved.
Product data sheet Rev. 3 — 1 September 2015 11 of 13
BLL8H0514L(S)-130
LDMOS driver transistor
13. Legal information
13.1 Data sheet status
[1] Please consult the most recently issued document before initiating or completing a design.
[2] The term ‘short data sheet’ is explained in section “Definitions”.
[3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.ampleon.com.
13.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. Ampleon does not give any representations or
warranties as to the accuracy or completeness of information included herein
and shall have no liability for the consequences of use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local Ampleon sales office. In
case of any inconsistency or conflict with the short data sheet, the full data
sheet shall prevail.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
Ampleon and its customer, unless Ampleon and customer have explicitly
agreed otherwise in writing. In no event however, shall an agreement be valid
in which the Ampleon product is deemed to offer functions and qualities
beyond those described in the Product data sheet.
13.3 Disclaimers
Limited warranty and liability — Information in this document is believed to
be accurate and reliable. However, Ampleon does not give any
representations or warranties, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information. Ampleon takes no responsibility for
the content in this document if provided by an information source outside of
Ampleon.
In no event shall Ampleon be liable for any indirect, incidental, punitive,
special or consequential damages (including - without limitation - lost profits,
lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Notwithstanding any damages that customer might incur for any reason
whatsoever, Ampleon’ aggregate and cumulative liability towards customer
for the products described herein shall be limited in accordance with the
Terms and conditions of commercial sale of Ampleon.
Right to make changes — Ampleon reserves the right to make changes to
information published in this document, including without limitation
specifications and product descriptions, at any time and without notice. This
document supersedes and replaces all information supplied prior to the
publication hereof.
Suitability for use — Ampleon products are not designed, authorized or
warranted to be suitable for use in life support, life-critical or safety-critical
systems or equipment, nor in applications where failure or malfunction of an
Ampleon product can reasonably be expected to result in personal injury,
death or severe property or environmental damage. Ampleon and its
suppliers accept no liability for inclusion and/or use of Ampleon products in
such equipment or applications and therefore such inclusion and/or use is at
the customer’s own risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. Ampleon makes no representation
or warranty that such applications will be suitable for the specified use without
further testing or modification.
Customers are responsible for the design and operation of their applications
and products using Ampleon products, and Ampleon accepts no liability for
any assistance with applications or customer product design. It is customer’s
sole responsibility to determine whether the Ampleon product is suitable and
fit for the customer’s applications and products planned, as well as for the
planned application and use of customer’s third party customer(s). Customers
should provide appropriate design and operating safeguards to minimize the
risks associated with their applications and products.
Ampleon does not accept any liability related to any default, damage, costs or
problem which is based on any weakness or default in the customer’s
applications or products, or the application or use by customer’s third party
customer(s). Customer is responsible for doing all necessary testing for the
customer’s applications and products using Ampleon products in order to
avoid a default of the applications and the products or of the application or
use by customer’s third party customer(s). Ampleon does not accept any
liability in this respect.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Terms and conditions of commercial sale — Ampleon products are sold
subject to the general terms and conditions of commercial sale, as published
at http://www.ampleon.com/terms, unless otherwise agreed in a valid written
individual agreement. In case an individual agreement is concluded only the
terms and conditions of the respective agreement shall apply. Ampleon
hereby expressly objects to applying the customer’s general terms and
conditions with regard to the purchase of Ampleon products by customer.
No offer to sell or license — Nothing in this document may be interpreted or
construed as an offer to sell products that is open for acceptance or the grant,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
Document status[1][2] Product status[3] Definition
Objective [short] data sheet Development This document contains data from the objective specification for product development.
Preliminary [short] data sheet Qualification This document contains data from the preliminary specification.
Product [short] data sheet Production This document contains the product specification.
BLL8H0514L-130_0514LS-130#3 All information provided in this document is subject to legal disclaimers. © Ampleon The Netherlands B.V. 2015. All rights reserved.
Product data sheet Rev. 3 — 1 September 2015 12 of 13
BLL8H0514L(S)-130
LDMOS driver transistor
Non-automotive qualified products — Unless this data sheet expressly
states that this specific Ampleon product is automotive qualified, the product
is not suitable for automotive use. It is neither qualified nor tested in
accordance with automotive testing or application requirements. Ampleon
accepts no liability for inclusion and/or use of non-automotive qualified
products in automotive equipment or applications.
In the event that customer uses the product for design-in and use in
automotive applications to automotive specifications and standards, customer
(a) shall use the product without Ampleon’ warranty of the product for such
automotive applications, use and specifications, and (b) whenever customer
uses the product for automotive applications beyond Ampleon’ specifications
such use shall be solely at customer’s own risk, and (c) customer fully
indemnifies Ampleon for any liability, damages or failed product claims
resulting from customer design and use of the product for automotive
applications beyond Ampleon’ standard warranty and Ampleon’ product
specifications.
Translations — A non-English (translated) version of a document is for
reference only. The English version shall prevail in case of any discrepancy
between the translated and English versions.
13.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
Any reference or use of any ‘NXP’ trademark in this document or in or on the
surface of Ampleon products does not result in any claim, liability or
entitlement vis-à-vis the owner of this trademark. Ampleon is no longer part of
the NXP group of companies and any reference to or use of the ‘NXP’
trademarks will be replaced by reference to or use of Ampleon’s own Any
reference or use of any ‘NXP’ trademark in this document or in or on the
surface of Ampleon products does not result in any claim, liability or
entitlement vis-à-vis the owner of this trademark. Ampleon is no longer part of
the NXP group of companies and any reference to or use of the ‘NXP’
trademarks will be replaced by reference to or use of Ampleon’s own
trademarks.
14. Contact information
For more information, please visit:
http://www.ampleon.com
For sales office addresses, please visit:
http://www.ampleon.com/sales
BLL8H0514L(S)-130
LDMOS driver transistor
© Ampleon The Netherlands B.V. 2015. All rights reserved.
For more information, please visit: http://www.ampleon.com
For sales office addresses, please visit: http://www.ampleon.com/sales
Date of release: 1 September 2015
Document identifier: BLL8H0514L-130_0514LS-130#3
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
15. Contents
1 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.1 General description . . . . . . . . . . . . . . . . . . . . . 1
1.2 Features and benefits . . . . . . . . . . . . . . . . . . . . 1
1.3 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2 Pinning information . . . . . . . . . . . . . . . . . . . . . . 2
3 Ordering information . . . . . . . . . . . . . . . . . . . . . 2
4 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 2
5 Thermal characteristics . . . . . . . . . . . . . . . . . . 3
6 Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . 3
7 Application information. . . . . . . . . . . . . . . . . . . 4
7.1 Ruggedness in class-AB operation . . . . . . . . . 4
7.2 Impedance information . . . . . . . . . . . . . . . . . . . 4
7.3 Performance curves . . . . . . . . . . . . . . . . . . . . . 5
8 Test information . . . . . . . . . . . . . . . . . . . . . . . . . 6
9 Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 8
10 Handling information. . . . . . . . . . . . . . . . . . . . 10
11 Abbreviations. . . . . . . . . . . . . . . . . . . . . . . . . . 10
12 Revision history. . . . . . . . . . . . . . . . . . . . . . . . 10
13 Legal information. . . . . . . . . . . . . . . . . . . . . . . 11
13.1 Data sheet status . . . . . . . . . . . . . . . . . . . . . . 11
13.2 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
13.3 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
13.4 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 12
14 Contact information. . . . . . . . . . . . . . . . . . . . . 12
15 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
