General Purpose Relays PCB Relays SCHRACK Miniature Power PCB RYII & RYII Reflow Solderable n n n n n n n n 1 pole 8A, 1 form C (CO) or 1 form A (NO) or 1 form B (NC) contact Low component height 12.3mm 5kV/8mm coil-contact Reinforced insulation (protection class II) Pinnings: 3.2mm and 5mm Reflow-solderable version Especially suitable for resistive and inductive loads on form A (NO) and form B (NC) contacts Plastic materials according to IEC 60335-1 (domestic appliances) Typical applications heating control, interface technology, domestic appliances, timers, temperature control F0142-E Z Approvals Coil Data VDE Cert. No. 40009639, UL E214025 Coil voltage range Operative range, IEC 61810 Technical data of approved types on request Contact Data Contact arrangement Rated voltage Max. switching voltage Rated current Breaking capacity max. Contact material Frequency of operation, with/without load Operate/release time max. Bounce time max., form A/form B Coil versions, DC coil Coil Rated Operate code voltage voltage VDC VDC 005 5 3.5 006 6 4.2 009 9 6.3 012 12 8.4 024 24 16.8 048 48 33.6 060 60 42.0 1 form C (CO) or 1 form A (NO) or 1 form B (NC) 250VAC 400VAC 8A 2000VA AgNi0.15, AgSnO2 6/1200min-1 9/5ms 6/10ms Contact ratings Type Contact Load IEC61810 RY531 A (NO) 8A, 250VAC, 70C RY211 A (NO) 8A, 250VAC, 70C RY211 B (NC) 8A, 250VAC, 70C UL508 RY211 A/B (NO/NC) 10A, 250VAC, general purpose, 70C RY211 A (NO) 1/2hp, 240VAC, 85C RY211 A/B (NO/NC) B300, 70C EN60730-1 RY211 A/B (NO/NC) 6(4)A, 250VAC, 85C RY211 A (NO) 8(4)A, 250VAC, 75C Mechanical endurance, DC coil 30x106 operations 5 to 60VDC 2 Release voltage VDC 0.5 0.6 0.9 1.2 2.4 4.8 6.0 Coil resistance 10% 112 162 320 627 2350 9391 14000 Rated coil power mW 223 222 253 230 245 245 257 All figures are given for coil without pre-energization, at ambient temperature +23C Other coil voltages on request Cycles 100x103 75x103 50x103 30x103 30x103 6x103 100x103 100x103 Insulation Data Initial dielectric strength between open contacts between contact and coil Clearance/creepage between contact and coil Material group of insulation parts Tracking index of relay base reflow-solderable version 01-2015, Rev. 0115 www.te.com (c) 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the `Definitions' section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the `Definitions' section, available at http://relays.te.com/definitions 1000Vrms 5000Vrms 8/8mm IIIa PTI250 PTI175 Datasheets, product data, `Definitions' section, application notes and all specifications are subject to change. 1 General Purpose Relays PCB Relays SCHRACK Miniature Power PCB RYII & RYII Reflow Solderable (Continued) Other Data Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter Ambient temperature -40 to +70C +85C at 6A Category of environmental protection IEC 61810 RTII - flux proof RTIII - wash tight1) Vibration resistance (functional), form A (NO)/form B (NC) 20/5g Shock resistance (functional) form A (NO)/form B (NC) 20/5g Shock resistance (destructive) 100g Terminal type PCB-THT, PCB-THR Weight8g Resistance to soldering heat THT IEC 60068-2-20 RTII : 270C/10s RTIII : 260C/5s Resistance to soldering heat THR IEC 60068-2-58 250C, no infrared heating allowed Packaging/unit standard version tube/20 pcs., box/500 pcs. reflow version reel/280 pcs. box/1120 pcs. (4 reels) PCB layout / terminal assignment Bottom view on solder pins 1 form C (CO) contact, 3.2mm S0254-AA S0254-AB 1 form A (NO), 1 form B (NC) contact 5mm 1) not available as reflow-solderable version Accessories For details see datasheet Accessories Miniature PCB Relay RY S0254-AC Dimensions Pinning 3.2mm S0254-AE S0254-AD S0274_CA Pinning 5mm S0254-AF S0274-CB 2) Values in brakets are valid for reflow-solderable version 2 01-2015, Rev. 0115 www.te.com (c) 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the `Definitions' section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the `Definitions' section, available at http://relays.te.com/definitions Datasheets, product data, `Definitions' section, application notes and all specifications are subject to change. General Purpose Relays PCB Relays SCHRACK Miniature Power PCB RYII & RYII Reflow Solderable (Continued) Soldering profile for reflow-solderable version Tape dimensions Reel dimensions Product code structure Typical product code RY 6 1 1 012 Type RY Miniature Power PCB RYII & RYII reflow solderable Version 2 pinning 3.2mm, flux proof 6 pinning 3.2mm, wash tight 2) 5 pinning 5mm, flux proof A pinning 5mm, wash tight 2) Contact arrangement 1 1 form C (1 CO), pinning 3.2mm 3 1 form A (1 NO), pinning 5mm 5 1 form B (1 NC), pinning 5mm Contact material 1 AgNi 0.15 2 AgNi 0.15 gold plated 3 AgSnO2 Coil Coil code: please refer to coil versions table Version Blank Standard version R reflow-solderable 2) not available as reflow-solderable version 01-2015, Rev. 0115 www.te.com (c) 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the `Definitions' section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the `Definitions' section, available at http://relays.te.com/definitions Datasheets, product data, `Definitions' section, application notes and all specifications are subject to change. 3 General Purpose Relays PCB Relays SCHRACK Miniature Power PCB RYII & RYII Reflow Solderable (Continued) Product code Version Contacts Contact material Version Contacts Contact material RY211005 Pinning 3.2 mm 1 form C, AgNi 0.15 RY211012 flux proof 1 CO contact RY211024 RY211048 RY212005 AgNi 0.15 RY212012 gold plated RY212024 RY212048 RY213005 AgSnO2 RY213012 RY213024 RY213048 RY531005 Pinning 5 mm 1 form A, AgNi 0.15 RY531012 flux proof 1 NO contact RY531024 RY531048 RY532012 AgNi 0.15 RY532024 gold plated RY533012 AgSnO2 RY533024 RY533048 RY611005 Pinning 3.2 mm 1 form C, AgNi 0.15 RY611012 wash tight 1 CO contact RY611024 RY611048 RY612005 AgNi 0.15 RY612012 gold plated RY612024 RY612048 RY613005 AgSnO2 RY613012 RY613024 RY613048 RY631024 1 form A, AgNi 0.15 RYA31005 Pinning 5 mm 1 NO contact RYA31012 wash tight RYA31024 RYA31048 RYA32005 AgNi 0.15 RYA32012 gold plated RYA32024 RYA33005 AgSnO2 RYA33024 Product code RY211005R RY211012R RY211024R RY531005R RY531012R RY531024R 4 01-2015, Rev. 0115 www.te.com (c) 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company pinning 3.2mm 1 form C, AgNi 0.15 flux proof 1 CO contact reflow solderable pinning 5.0mm 1 form A, flux proof 1 NO contact reflow solderable Datasheets and product specification according to IEC 61810-1 and to be used only together with the `Definitions' section. Coil Part number Coil Part number 5VDC 12VDC 24VDC 48VDC 5VDC 12VDC 24VDC 48VDC 5VDC 12VDC 24VDC 48VDC 5VDC 12VDC 24VDC 48VDC 12VDC 24VDC 12VDC 24VDC 48VDC 5VDC 12VDC 24VDC 48VDC 5VDC 12VDC 24VDC 48VDC 5VDC 12VDC 24VDC 48VDC 24VDC 5VDC 12VDC 24VDC 48VDC 5VDC 12VDC 24VDC 5VDC 24VDC 5VDC 12VDC 24VDC 5VDC 12VDC 24VDC Datasheets and product data is subject to the terms of the disclaimer and all chapters of the `Definitions' section, available at http://relays.te.com/definitions 4-1393224-2 4-1393224-6 4-1393224-9 5-1393224-1 5-1393224-2 5-1393224-5 5-1393224-8 5-1393224-9 6-1393224-0 6-1393224-1 6-1393224-2 6-1393224-3 7-1393224-6 7-1393224-9 8-1393224-2 8-1393224-3 8-1393224-4 8-1393224-5 8-1393224-8 8-1393224-9 9-1393224-0 1-1393225-7 1-1393225-9 2-1393225-1 2-1393225-2 2-1393225-3 2-1393225-6 2-1393225-9 3-1393225-0 5-1419136-2 3-1393225-1 3-1393225-3 3-1393225-4 4-1415400-1 1393224-7 1393224-9 1-1393224-2 1-1393224-3 1-1393224-4 1-1393224-6 1-1393224-8 1-1393224-9 2-1393224-1 1-1956170-2 1-1956170-6 1956164-1 1-1956171-1 1-1956171-4 1-1956171-7 Datasheets, product data, `Definitions' section, application notes and all specifications are subject to change.