1
Power entry modules without line filter EC11
https://www.schurter.com /PG05
Connectors
IEC Appliance Inlet C20 with Line Switch, 2-pole
Screw-on mounting
from front side
non-illuminated, black
Snap-in mounting from front side
illuminated version
green
See below:
Approvals and Compliances
C20
70° C
Description
- Panel mount :
Screw-on version from front or rear side, snap-in version from front
side
- 2 Functions :
Appliance Inlet Protection class I , Line Switch 2-pole
- Quick connect terminals 6.3 x 0.8 mm
Characteristics
- All single elements are already wired
- Unwired versions available on request
- Line switch non-illuminated or illuminated
- Ideal for application with high transient loads
- Suitable for use in equipment according to IEC/UL 62368-1
Other versions on request
- Unwired versions
- Line switch with other rocker marking
- For protection class II
- Variant with notch for V-Lock mating Cordsets
References
Alternative: version with line filter EC12
Weblinks
pdf data sheet, html datasheet, General Product Information, Approvals,
Distributor-Stock-Check, Accessories, Detailed request for product
Newly available variants corresponding to V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset.
The cord latching system prevents against accidental removal of the cordset.
Technical Data
Ratings IEC 16 A / 250 VAC; 50 Hz
Ratings UL/CSA 20 A / 250 VAC; 60 Hz
Dielectric Strength > 2.5 kVAC between L-N
> 3 kVAC between L/N-PE
(1 min/50 Hz)
Allowable Operation Tempe-
rature
-25 °C to 70 °C
IP-Protection from front side IP40 acc. to IEC 60529
Protection against electric
shock
Suitable for appliances with protection
class I acc. to IEC 61140
Terminal Quick connect terminals 6.3 x 0.8 mm
Panel Thickness S Screw: max 8 mm
Mounting screw torque max 0.5 Nm
Snap-in: 1.5/2/2.5 mm
Material: Housing Thermoplastic, black, UL 94V-0
Appliance inlet/-outlet C20 acc. to IEC 60320-1,
UL 60320-1, CSA C22.2 no. 60320-1
(for cold conditions) pin-temperature 70
°C, 16 A, Protection Class I
Line Switch Rocker switch 2-pole, non-illuminated
or illuminated, acc. to IEC 61058-1
Technical Details
Approvals and Compliances
Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about
Approvals
SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national
and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF
16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agree-
ments by SCHURTER.
2
Power entry modules without line filter
EC11 https://www.schurter.com /PG05
Connectors
Approvals
The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products.
Approval Reference Type: EC11
Approval Logo Certificates Certification Body Description
VDE Approvals VDE Certificate Number: 40001031
UL Approvals UL UL File Number: E96454
CCC Approvals CCC CCC Certificate Number: 2014010204683955
Product standards
Product standards that are referenced
Organization Design Standard Description
Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes
Designed according to IEC 61058-1 Switches for appliances. Part 1. General requirements
Designed according to UL 60320-1 Standard for Attachment Plugs and Receptacles
Designed according to CSA C22.2 no. 60320-1 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices
Application standards
Application standards where the product can be used
Organization Design Standard Description
Designed for applications acc. IEC/UL 62368-1 IEC 62368-1 includes the basic requirements for safety of audio, video,
information technology and office equipment.
Designed for applications acc. IEC 60335-1 Safety of electrical appliances for household and similar purposes. Meets
the requirements for appliances in unattended use. This includes the
enhanced requirements of glow wire tests acc. to IEC 60695-2-11 or -12
& -13.
Compliances
The product complies with following Guide Lines
Identification Details Initiator Description
CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable
requirements laid down in the harmonisation of Community legislation on
its affixing in accordance with EU Regulation 765/2008.
RoHS SCHURTER AG Directive RoHS 2011/65/EU, Amendment (EU) 2015/863
China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March
2007. It is similar to the EU directive RoHS.
REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration,
Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as
"REACH") entered into force.
SCHURTER AG V-Lock system are based on a matching plug-dose combination. The
connector is equipped with a notch intended for use with the latching
cordset. The cord latching system prevents against accidental removal of
the cordset.
White Paper Glow wire test SCHURTER AG Meets the requirements of IEC 60335-1 for appliances in unattended use.
This includes the enhanced requirements of glow wire tests acc. to IEC
60695-2-11 or -12 &-13.
3
Power entry modules without line filter EC11
https://www.schurter.com /PG05
Connectors
Dimensions [mm]
Screw-on mounting
3.3
57
67
6.4
S 32.5
26.6 4.8
46.2
10.4
32.2
36
31.6
ca. 52 2.3
5
R 6
R 4.7
R 2.8
0.8
45.7
31.7
R 2.6
±0.10
57
±0.10
3.6
±0.05
R 2.95
±0.10
46.5
±0.05
5.25
Snap-in mounting
50
S 32.5
26.6 4.8
46.2
1.9
32.2
36
31.6
ca. 52 2.3
R 4.7
R 2.8
45.72.15
31.7
R 2.6
±0.05
R 2.95
46.5
±0.05 +0.05
-0.10
+0.05
-0.10
Diagrams
Line switch non-illuminated
1
2
PE'
L
N
PE
2)
1)
1) Line
2) Load
Line switch illuminated
1
2
PE'
L
N
PE
2)
1)
1) Line
2) Load
All Variants
Panel mounting Panel Thickness
s [mm]
Illumination Color Internally wired V-Lock Order Number
Snap-in 1.5 - l EC11.0001.201
Snap-in 1.5 - l l EC11.0001.201.21
Snap-in 1.5 - EC11.0001.202
Snap-in 1.5 lred l EC11.0021.201
Snap-in 1.5 lred l l EC11.0021.201.21
Snap-in 1.5 lred EC11.0021.202
4
Power entry modules without line filter
EC11 https://www.schurter.com /PG05
Connectors
Panel mounting Panel Thickness
s [mm]
Illumination Color Internally wired V-Lock Order Number
Snap-in 1.5 lgreen l EC11.0031.201
Snap-in 1.5 lgreen l l EC11.0031.201.21
Snap-in 1.5 lgreen EC11.0031.202
Snap-in 2 - l EC11.0001.301
Snap-in 2 - l l EC11.0001.301.21
Snap-in 2 - EC11.0001.302
Snap-in 2 lred l EC11.0021.301
Snap-in 2 lred l l EC11.0021.301.21
Snap-in 2 lred EC11.0021.302
Snap-in 2 lgreen l EC11.0031.301
Snap-in 2 lgreen l l EC11.0031.301.21
Snap-in 2 lgreen EC11.0031.302
Snap-in 2.5 - l EC11.0001.401
Snap-in 2.5 - EC11.0001.402
Snap-in 2.5 lred l EC11.0021.401
Snap-in 2.5 lred EC11.0021.402
Snap-in 2.5 lgreen l EC11.0031.401
Snap-in 2.5 lgreen EC11.0031.402
Screw - - l EC11.0001.001
Screw - - l l EC11.0001.001.21
Screw - - EC11.0001.002
Screw - lred l EC11.0021.001
Screw - lred l l EC11.0021.001.21
Screw - lred EC11.0021.002
Screw - lgreen l EC11.0031.001
Screw - lgreen l l EC11.0031.001.21
Screw - lgreen EC11.0031.002
Most Popular.
Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER
Packaging unit 25 Pcs
5
Power entry modules without line filter EC11
https://www.schurter.com /PG05
Connectors
Accessories
Description
Wire Harness
Wire harness for SCHURTER products
Assorted Covers
Rear Cover
0859.0076
RC320
Rear Cover for Power Entry Module
Cord retaining kits
Cord retaining strain relief
Flat head, H 4700.0008
Mating Outlets/Connectors
Category / Description
Connector Overview complete
4795, Mounting: Power Cord, Cable Connector: IEC C19 4795
4790, Mounting: Power Cord, Screw Connector: IEC C19 4790
0104U, Mounting: Power Supply Cord, Screw clamps Connector: IEC C19 0104U
Connector further types to EC11
Power Supply Cord Overview complete
Cord Sets 10 A, North America, 3.0 m, Connector IEC C13, SJT 3x18 AWG, Transparent 4300.0920
Cord Sets 16 A, Europlug, 2.5 m, Connector IEC C19, H05VV-F3G1.5, black 6004.0395
Cord Sets 16 A, Interconnection, 1.0 m, Connector IEC C19, H05VV-F3G1.5, black 6020.0392
Cord Sets 16 A, Interconnection, 2.0 m, Connector IEC C19, H05VV-F3G1.5, black 6020.0394
Cord Sets 16 A, North America, 2.5 m, Connector IEC C19, SJT 3x14 AWG, black 6009.5195
Power Supply Cord further types to EC11
6
Power entry modules without line filter
EC11 https://www.schurter.com /PG05
Connectors
Mating Outlets/Connectors shuttered
Power Cord Overview complete
VAC19KS, Overview, V-Lock cord retaining, diverse Connector IEC C19, diverse, black VAC19KS
Power Cord further types to EC11
The specifications, descriptions and illustrations indicated in this document are based on current
information. All content is subject to modifications and amendments. Information furnished is believed
to be accurate and reliable. However, users should independently evaluate the suitability and test each
product selected for their own applications.
15.10.2020