5.54
(±0.20)
10
(±2.0)
20
(±0.5)
5.2
(±0.1/-0.2)
38.10
(±0.38)
21.10
(±0.81)
38.10
(±0.38)
0.65
(REF)
Specifications
Voltage Interrupting Rating Typical Typical Max
Part Number Rating at Rated Voltage DC Cold Melting Voltage Agency Information
Vac (50Hz) Vac (amps) Resistance (Ω)* I2t AC†Drop (mV)‡cURus CCC BSI VDE PSE SEMKO IMQ
S500-32-R 250 35 40 0.000047 3200
S500-40-R 250 35 25 0.00011 2500
S500-50-R 250 35 17 0.0002 2400
S500-63-R 250 35 12.5 0.00057 2000
S500-80-R 250 35 5 0.0012 1200
S500-100-R 250 35 3.8 0.003 1100
S500-125-R 250 35 2.8 0.005 1000
S500-160-R 250 35 9.1 0.008 2000 XXXX XX
S500-200-R 250 35 6.8 0.016 1700 XXXX XX
S500-250-R 250 35 4.3 0.28 1400 XXXX XX
S500-315-R 250 35 3.1 0.58 1300 XXXX XX
S500-400-R 250 35 2 0.18 1100 XXXX XX
S500-500-R 250 35 0.26 0.18 220 XXXX XX
S500-630-R 250 35 0.2 0.35 220 XXXX XX
S500-800-R 250 35 0.14 0.67 190 XXXX XX
S500-1-R 250 35 0.125 0.6 200 XXXXXXX
S500-1.25-R 250 35 0.096 0.84 200 XXXXXXX
S500-1.6-R 250 35 0.066 1.6 190 XXXXXXX
S500-2-R 250 35 0.043 4.2 150 XXXXXXX
S500-2.5-R 250 35 0.034 6.1 150 XXXXXXX
S500-3.15-R 250 35 0.025 13 130 XXXXXXX
S500-4-R 250 40 0.021 22 130 XXXXXXX
S500-5-R 250 50 0.014 42 120 XXXXXXX
S500-6.3-R 250 63 0.01 69 120 XXXXXXX
S500-8-R 250 80 0.01 NA 120 XXXXX
S500-10-R 250 100 0.008 NA 120 XXXXX
* DC Cold Resistance (Measured at <10% of rated current)
† Typical Melting I2t (I2t was measured at listed interrupting rating and rated voltage)
‡ Maximum Voltage Drop (Voltage drop was measured at 20°C ambient temperature at rated current)
Electrical Characteristics
1.5 In2.1 In2.75 In4 In10 In
In min max min max min max max
32mA-125mA60min 30min –––––
160mA-6.3A 60min 30min 50ms 2sec 10ms 300ms 20ms
8A-10A 30min 30min 50ms 2sec 10ms 400ms 40ms
5 x 20mm,
Fast-Acting, Glass Tube
Fuses
S500 Series
0113 BU?SB121092 Page 1 of 2 Data Sheet 2052
Description
• Fast-acting, low breaking capacity
• Optional axial leads available
• 5 x 20mm physical size
• Glass tube with silver-plated (32-125mA) and
nickel-plated (160mA-10A) endcaps
• Designed to IEC 60127-2 (160mA-10A)
Agency Information
• cURus: File E19180, Guide JDYX2, JDYX8
• SEMKO Approval: File 913796
• VDE Approval: File 40014109
• BSI Approval: File KM55676
• IMQ Approval: File CA03.00097
• CCC Approval: File 2005010207155694
• PSE Approval File: JET1641-31003-1013,
JET1641-31003-1014, JET1641-31003-1015,
JET1641-31003-1016
Dimensions - mm
Drawing Not to Scale
• Ratings above 6.3A have a 0.8mm diameter lead
• With TR2 packaging code, lead wire length is 19.05mm
Ordering
Specify product code
•Insert packaging code prefix before part number.
E.g., BK/S500-32-R
Specify option code if desired
• For axial leads, insert “V” between catalog series and
amp rating. E.g., S500-V-100-R