DS25007 Rev. 3 - 2 1 of 3 UF2001 - UF2007
www.diodes.com ã Diodes Incorporated
UF2001 - UF2007
2.0A ULTRA-FAST RECTIFIER
Features
A A
B
C
D
DO-15
Dim Min Max
A25.40 ¾
B5.50 7.62
C0.686 0.889
D2.60 3.60
All Dimensions in mm
Maximum Ratings and Electrical Characteristics @ TA = 25°C unless otherwise specified
·Diffused Junction
·Ultra-Fast Switching for High Efficiency
·High Current Capability and Low Forward Voltage Drop
·Surge Overload Rating to 60A Peak
·Low Reverse Leakage Current
·Lead Free Finish, RoHS Compliant (Note 4)
Mechanical Data
·Case: Molded Plastic
·Case Material: Molded Plastic. UL Flammability Classification
Rating 94V-0
·Moisture Sensitivity: Level 1 per J-STD-020C
·Terminals: Finish – Bright Tin. Solderable per MIL-STD-202,
Method 208
·Polarity: Cathode Band
·Marking: Type Number
·Mounting Position: Any
·Weight: 0.4 grams (approximate)
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Characteristic Symbol UF
2001
UF
2002
UF
2003
UF
2004
UF
2005
UF
2006
UF
2007 Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VR
50 100 200 400 600 800 1000 V
RMS Reverse Voltage VR(RMS) 35 70 140 280 420 560 700 V
Average Rectified Output Current
(Note 1) @ TA = 50°CIO2.0 A
Non-Repetitive Peak Forward Surge Current
8.3ms Single half sine-wave Superimposed on Rated Load
(JEDEC Method)
IFSM 60 A
Forward Voltage @ IF = 2.0A VFM 1.0 1.3 1.7 V
Peak Reverse Current @ TA = 25°C
at Rated DC Blocking Voltage @ TA = 100°CIRM 5.0
100 mA
Reverse Recovery Time (Note 3) trr 50 75 ns
Typical Junction Capacitance (Note 2) Cj50 30 pF
Typical Thermal Resistance Junction to Ambient RqJA 50 K/W
Operating and Storage Temperature Range Tj, TSTG -65 to +150 °C
Notes: 1. Valid provided that leads are maintained at ambient temperature at a distance of 9.5mm from the case.
2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC.
3. Measured at IF = 0.5A, IR = 1.0A, Irr = 0.25A. See figure 5.
4. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7.