EC11 Power entry modules without line filter https://www.schurter.com /PG05 IEC Appliance Inlet C20 with Line Switch, 2-pole Snap-In Version or Screw-On Version illuminated version C20 Approvals and Compliances 70 C Description - Panel Mount : Screw-on version from front or rear side, snap-in version from front side - 2 Functions : Appliance Inlet Protection class I , Line Switch 2-pole - Quick connect terminals 6.3 x 0.8 mm Characteristics - All single elements are already wired Unwired versions available on request Line switch non-illuminated or illuminated Ideal for application with high transient loads Suitable for use in equipment according to IEC/UL 60950 Other versions on request - Unwired versions Line switch with other rocker marking For protection class II Variant with notch for V-Lock mating Cordsets References Alternative: version with line filter EC12 Weblinks pdf datasheet, html-datasheet, General Product Information, DistributorStock-Check, Accessories, Detailed request for product, Microsite Newly available variants corresponding to V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Technical Data Ratings IEC Ratings UL/CSA Dielectric Strength Allowable Operation Temperature IP-Protection Insulation cover Terminal Panel Thickness S Material: Housing 16 A / 250 VAC; 50 Hz 20 A / 250 VAC; 60 Hz > 2.5 kVAC between L-N > 3 kVAC between L/N-PE (1 min/50 Hz) -25 C to 70 C appliance inlet/-outlet Line Switch C20 acc. to IEC 60320-1, UL 498, CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 C, 16 A, Protection Class I Rocker switch 2-pole, non-illuminated or illuminated, acc. to IEC 61058-1 Technical Details from front side IP 40 acc. to IEC 60529 Suitable for appliances with protection class I acc. to IEC 61140 Quick connect terminals 6.3 x 0.8 mm Screw: max 8 mm Mounting screw torque max 0.5 Nm Snap-in: 1.5/2/2.5 mm Thermoplastic, black, UL 94V-0 Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals Connectors 1 EC11 Power entry modules without line filter https://www.schurter.com /PG05 Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: EC11 Approval Logo Certificates Certification Body Description VDE Approvals VDE Certificate Number: 40001031 UL Approvals UL UL File Number: E96454 Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to IEC 61058-1 Switches for appliances. Part 1. General requirements Designed according to UL 498 Standard for Attachment Plugs and Receptacles Designed according to CSA C22.2 no. 42 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Design Standard Description Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technologyequipment. Designed for applications acc. IEC 60335-1 Safety of electrical appliances for household and similar purposes. Meets the requirements for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-12 and -13. Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. RoHS SCHURTER AG EU Directive RoHS 2011/65/EU China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. MicrositeV-Lock SCHURTER AG V-Lock system are based on a matching plug-dose combination. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Product standards Product standards that are referenced Organization Application standards Application standards where the product can be used Organization Compliances The product complies with following Guide Lines Identification 2 Connectors EC11 Power entry modules without line filter https://www.schurter.com /PG05 Dimensions [mm] Screw-on mounting 36 2.3 ca. 52 32.2 31.7 3.6 31.6 R 46.50.10 57 0.10 45.7 46.2 57 67 R 2. 95 0 .0 5 6 2. 0.8 10.4 4. 7 5 R6 R S 3.3 6.4 32.5 0.10 26.6 5.25 0.05 8 R 2. 4.8 Snap-in mounting 36 2.3 ca. 52 32.2 31.7 31.6 R +0.05 46.5 -0.10 45.7 2.15 4. R 2.8 1.9 7 50 46.2 R 2. 95 0 .0 5 6 2. R S 0.05 32.5 26.6 +0.05 -0.10 4.8 Diagrams Line switch non-illuminated 1) L Line switch illuminated 1 PE 2) PE' N 2 1) Line 2) Load 1) L 1 PE 2) PE' N 2 1) Line 2) Load All Variants Panel mounting Panel Thickness s [mm] Illumination Color Internally wired Snap-in 1.5 - l Snap-in 1.5 Snap-in 1.5 l red Snap-in 1.5 l red - Snap-in 1.5 l green Snap-in 1.5 l green V-Lock Order Number EC11.0001.201 EC11.0001.202 l EC11.0021.201 EC11.0021.202 l EC11.0031.201 EC11.0031.202 Connectors 3 EC11 Power entry modules without line filter https://www.schurter.com /PG05 Panel mounting Panel Thickness s [mm] Illumination Color Internally wired Snap-in Snap-in 2 - l 2 - l Snap-in 2 Snap-in 2 l red Snap-in 2 l red Snap-in 2 l green Snap-in 2 l green Snap-in 2.5 - Snap-in 2.5 - Snap-in 2.5 l red Snap-in 2.5 l red Snap-in 2.5 l green Snap-in 2.5 l green Screw - - Screw - - V-Lock EC11.0001.301 l - Screw - l red Screw - l red Screw - l green Screw - l green Order Number EC11.0001.301.21 EC11.0001.302 EC11.0021.301 l EC11.0021.302 EC11.0031.301 l EC11.0031.302 EC11.0001.401 l EC11.0001.402 EC11.0021.401 l EC11.0021.402 EC11.0031.401 l EC11.0031.402 l l EC11.0001.001.21 EC11.0001.002 l EC11.0021.001 EC11.0021.002 l EC11.0031.001 EC11.0031.002 Most Popular. Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER Packaging unit 25 Pcs Accessories Description Wire Harness Wire harness for SCHURTER products Assorted Covers Rear Cover 0859.0076 Cord retaining kits Cord retaining strain relief Flat head, H 4 Connectors 4700.0008 EC11 Power entry modules without line filter https://www.schurter.com /PG05 Mating Outlets/Connectors Category / Description Connector Overview complete IEC Connector C19, Rewireable, Straight 4795 IEC Connector C19, Rewireable, Angled 4790 IEC Connector C19, Rewireable, Straight 0104U Connector further types to EC11 Power Supply Cord Overview complete Cord Sets 10 A, North America, 3.0 m, Connector IEC C13, SJT 3x18 AWG, Transparent 4300.0920 Cord Sets 16 A, Europlug, 2.5 m, Connector IEC C19, H05VV-F3G1.5, black 6004.0395 Cord Sets 16 A, Interconnection, 1.0 m, Connector IEC C19, H05VV-F3G1.5, black 6020.0392 Cord Sets 16 A, Interconnection, 2.0 m, Connector IEC C19, H05VV-F3G1.5, black 6020.0394 Cord Sets 16 A, North America, 2.5 m, Connector IEC C19, SJT 3x14 AWG, black 6009.5195 Power Supply Cord further types to EC11 Mating Outlets/Connectors shuttered Power Cord Overview complete Overview Power Cord with IEC Appliance Connector C19, V-Lock, straight VAC19KS 01.12.2017 Power Cord further types to EC11 The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. Connectors 5 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Schurter: EC11.0021.201 EC11.0001.201 EC11.0031.001 EC11.0021.001 EC11.0031.201 EC11.0001.001 EC11.0001.301 EC11.0001.401 EC11.0021.301 EC11.0021.401 EC11.0031.301 EC11.0031.401 EC11.0001.002 EC11.0001.206 EC11.0001.001.21