Cannon D-Subminiature Accessories D Cannon D-Subminiature Accessories Selection Guide Locking Hardware Backshell Style EMI Shielded Snap-Together Metalized Plastic Straight Exit see page 4 EMI Shielded Snap-Together Metalized Plastic 50 Exit see page 4 Female Screw Lock see page 12 Male Screw Lock see page 11 Sliding Lock Retainer see page 13 Slide Lock Post see page 13 Spring Latch Plate see page 14 Spring Latch see page 14 -- -- -- -- -- -- -- -- -- -- -- -- EMI Shielded Die Cast Zinc Metal see page 6 -- -- -- -- -- Metal Deep Straight Clamp see page 7 * * * * * * Metal Round Cable Clamp see page 7 * * * * * * Metal Short Straight Clamp see page 8 * * * * * * Metal 90 Entry see page 8 * * * * * * Plastic Snap-Together Universal see page 9 * * -- -- -- -- Plastic One-Piece Snap-Together see page 9 -- -- -- -- -- Plastic One-Piece Plastic Straight Exit see page 10 -- -- * * * * Plastic One-Piece Plastic 90 Exit see page 10 -- -- * * * * Supplied with backshell * Optional compatible locking hardware -- Not compatible 2 Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com D Cannon D-Subminiature Accessories Selection Guide Locking Hardware Jackscrew Assembly see page 15 Jackpost Assembly see page 15 Recessed Jackscrew see page 5 Extended Jackscrew see page 5 Thumbscrew see page 5 Jackpost for In-Line Connections see page 5 -- -- * * * * -- -- * * * * -- -- -- -- -- -- -- * -- -- -- -- -- * -- -- -- -- -- * -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 3 D Cannon D-Subminiature Accessories EMI Shielded Backshell Snap-Together Metalized Plastic Metalized plastic backshells reduce EMI/RFI emissions. Metalized plastic provides a light weight solution. Design includes integral strain relieving cable CABLE CLAMP CABLE GROUNDING TANG Product Features * Improves conformance to FCC DOC #20780 shielding requirements * No crimp ferrule tooling needed * Quick and simple assembly using snapAttenuation Note: Cable grounding tang not available on DE size back- Specifications Attenuation: Temperature Range: -49 dB @ 100MHz -20 C to 80 C Materials and Finishes Material: Thermoplastic, UL 94V-0 rated Finish: Nickel over Copper Straight Exit C D OH MAX E 16,990,30 (.669.012) A B * Kit consists of 1 front shell, 1 rear shell, 1 cable clamp, 2 screws * Optional locking hardware sold separately, see page 5 Shell Shielded Non-Shielded A B Size Layout Part # Part # Gray * 0,15 (.006) 0,30 (.012) DE 9 DE121073-154 DE121073-159 24,95 (.982) 30,81 (1.213) DA 15 DA121073-150 DA121073-155 33,30 (1.311) 39,09 (1.539) DB 25 DB121073-151 DB121073-156 47,00 (1.850) 53,01 (2.087) DC 37 DC121073-152 DC121073-157 63,45 (2.498) 69,29 (2.728) DD 50 DD121073-153 DD121073-158 61,10 (2.410) 66,90 (2.634) * Color Black available by request, please contact Customer Service. C 0,30 (.012) 23,70 (.933) 31,80 (1.252) 45,01 (1.772) 60,30 (2.374) 58,30 (2.295) D 0,30 (.120) 16,00 (.630) 16,00 (.630) 16,00 (.630) 16,00 (.630) 19,00 (.748) E oH 0,20 (.008) 35,99 (1.417) 42,00 (1.654) 42,00 (1.654) 42,00 (1.654) 42,00 (1.654) Max. 7,32 (.288) 8,31 (.327) 10,52 (.414) 12,32 (.485) 13,00 (.512) 50 Exit D E * Kit consists of 1 front shell, 1 rear shell, 1 cable clamp, 2 screws * Optional locking hardware sold separately, see page 5 Shell Shielded Non-Shielded B C Size Layout Part # Part # Gray* 0,30 (.012) 0,30 (.012) DE 9 DE121073-54 DE121073-59 35,99 (1.417) 22,00 (8.66) DA 15 DA121073-50 DA121073-55 44,29 (1.744) 27,31 (1.075) DB 25 DB121073-51 DB121073-56 57,99 (2.283) 41,00 (1.614) DC 37 DC121073-52 DC121073-57 74,50 (2.933) 57,51 (2.264) DD 50 DD121073-53 DD121073-58 72,97 (2.873) 54.99 (2.165) * Color Black available by request, please contact Customer Service. 4 D 0,30 (.012) 16,00 (.630) 16,00 (.630) 16,00 (.630) 16,00 (.630) 19,00 (.748) E 0,20 (.008) 35,99 (1.417) 42,01 (1.654) 42,01 (1.654) 42,01 (1.654) 42,01 (1.654) Cable Diameter Min. Max. 3,51 (.138) 7,49 (.295) 6,50 (.256) 8,99 (.354) 6,50 (.256) 11,00 (.433) 6,50 (.256) 11,00 (.433) 8,99 (.354) 13,00 (.512) Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com D Cannon D-Subminiature Accessories EMI Shielded Backshell Locking Hardware for Snap -Together EMI Shielded Backshell Recessed Jackscrew 13,50 (.531) 9,00 (.354) 4,50 (.177) DIA. 19,00 (.748) 4,30 9,00 (.169) (.354) #4-40 Threads 6,00 (.236) MIN. Part Number: Material: Finish: Quantity required per connector: Thumbscrew Extended Jackscrew 2 50,00 (1.969) 4,30 (.169) 9,00 (.354) 6,00 (.236) #4-40 THREADS 6,00 (.236) MIN. 4,10 (.161) DIA. 250-8501-004 Brass Nickel #4-40 Threads Part Number: 250-8501-009 (M3) 250-8501-010 (#4-40) Brass Nickel Material: Finish: Quantity required per connector: Part Number: Material: Finish: Quantity required per connector: 250-8501-013 Brass Nickel 2 2 Jackpost for In-Line Connections Rectangular Nut Jackpost Assembly Jackpost 11,00 (.433) 5,00 (.197) 4,60 (.189) 5,00 (.197) 1,81 (.075) 4,90 (.193) 3,00 (.118) MIN 6,00 (.236) #4-40 UNC-2B 6,00 (.236) #4-40 UNC-2B #4-40 UNC-2A 5,00 (.197) (ACROSS FLATS) Assembly consists of 1 rectangular nut, 1 jackpost, 1 # 4-40 lock washer. Part Number: Material: Finish: Quantity required per connector: Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 5 D121073-19 Brass Nickel 2 EMI Shielded Backshell D Cannon D-Subminiature Accessories Die Cast Zinc Metal Backshell 9 and 15 Position Straight Exit 25 Position A Product Features * Improves conformance to FCC DOC #20780 shielding requirements * No crimp ferrule tooling needed * Kit consists of 1 front shell, 1 rear shell, 2 screws, 2 hex nuts, 2 mounting screws, 2 end brackets, 1 set of compres- A D D E Dia. E Dia. F F F Die cast metal backshells offer improved shielding B D E Dia. Die cast metal backshells reduce EMI/RFI emissions. C B B A 37 and 50 Position C Shell Part Size Layout Number DE 9 980-2000-345 DA 15 980-2000-346 DB 25 980-2000-347 DC 37 980-2000-348 DD 50 980-2000-349 Specifications Attenuation: Temperature Range: A 0,13 (.005) 31,12 (1.225) 39,12 (1.540) 53,09 (2.090) 69,34 (2.730) 66,70 (2.626) B 0,13 (.005) 37,21 (1.465) 40,64 (1.600) 39,37 (1.550) 45,72 (1.800) 45,72 (1.800) C D oE F 0,13 (.005) 0,13 (.005) 0,13 (.005) 0,13 (.005) 15,75 (.620) 15,75 (.620) 10,16 (.400) 24,99 (.984) 15,75 (.620) 15,75 (.620) 10,16 (.400) 33,32 (1.312) 17,53 (690) 15,75 (.620) 13,34 (.525) 47,17 (1.857) 21,95 (.864) 15,75 (.620) 18,44 (.726) 63,50 (2.500) 21,95 (.864) 18,54 (.730) 18,44 (.726) 61,11 (2.406) Materials and Finishes Backshell Material: Backshell Finish: Compression Inserts: Hardware Material: Hardware Finish: -50 dB @ 1000MHz -20 C to 80 C Attenuation Zinc Clear Zinc PVC Steel Clear Zinc Diecast Shell Shielding Performance 0 -10 -20 db -30 -40 -50 -60 -70 100 1000 Mhz Compression inserts (included with die cast zinc metal backshell) Compression inserts accommodate a wide variety of cable sizes. Position 9,15 25 37,50 Cable Diameter 4,83/8,89 (.190/.350) 4,83/11,68 (.190/.460) 7,62/17,27 (.300/.680) 9 and 15 Position* 25 Position* 1 1 37 and 50 Position* 6 2 2 3 5 3 5 4 3 2 1 4 4 5 * Inserts may be supplied mirror image. Position 9,15 25 37.50 #1 O.D. I.D. 12,07 (.475) 8,13 (.320) 15,24 (.600) 11,43 (.450) 16,64 (.655) 14,48 (.570) #2 #3 #4 O.D. I.D. O.D. I.D. O.D. I.D. 9,14 (.360) 8,00 (.315) 9,14 (.360) 6,48 (.255) 9,14 (.360) 7,24 (.285) 11,43 (.450) 10,41 (.410) 11.43 (.450) 9,40 (.370) 11.43 (.450) 7,62 (.300) 17,78 (.700) 15,75 (.620) 20,57 (.810) 16,51 (.650) 16,64 (.655) 12,70 (.500) 6 #5 #6 O.D. I.D. O.D. I.D. 9,14 (.360) 5,33 (.210) -- -- 11.43 (.450) 5,84 (.230) -- -- 16,64 (.655) 10,80 (.425) 16,64 (.655) 8,89 (.350) Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com D Cannon D-Subminiature Accessories Metal Backshell Metal Backshell Metal Backshells provide strain relief. Various profiles available for different cable routing requirements. Product Features Materials and Finishes Backshell Material: Low Carbon Steel Backshell Finish: Chromate over Cadmium (Mil Spec) or Zinc (RoHS) Hardware Material: Steel Qualified to MIL-Spec M85049 Deep Straight Clamp E CABLE ENTRY IN SHELL B H MAX. G F C A D MAX. CABLE ENTRY IN SHELL 3,45 0,13 (.136 .005) TWO MTG. HOLES * Kit consists of 1 shell, 2 cable clamps, 2 screws, 2 hex nuts. 0,38 0,13 (.015 .005) RoHS Compliant Part Number DE DE24657-29 DA DA24658-28 DB DB24659-27 DC DC24660-27 DD DD24661-27 Shell Part Mil Spec A B C Size Layout Number Part Number* 0,38 (.015) 0,572 (.0225) 0,38 (.015) DE 9 DE24657 M85049/48-1-1F 30,56 (1.203) 12,484 (.4915) 24,99 (.984) DA 15 DA24658 M85049/48-1-2F 38,89 (1.531) 12,484 (.4915) 33,32 (1.312) DB 25 DB24659 M85049/48-1-3F 52,78 (2.078) 12,484 (.4915) 47,04 (1.852) DC 37 DC24660 M85049/48-1-4F 69,04 (2.718) 12,484 (.4915) 63,50 (2.500) DD 50 DD24661 M85049/48-1-5F 66,68 (2.625) 15,253 (.6005) 61,11 (2.406) * Parts may be ordered with "F" suffix. Part markings reflect base part number without "F" suffix. D max. 14,68 (.578) 14,68 (.578) 14,68 (.578) 14,68 (.578) 17,45 (.578) E 0,38 (.015) 9,53 (.375) 18,11 (.713) 25,40 (1.000) 34,93 (1.375) 35,71 (1.406) F 0,38 (.015) 9,53 (.375) 7.93 (.312) 7.93 (.312) 7.93 (.312) 10,31 (.406) G 0,38 (.015) 19,05 (.750) 19,05 (.750) 25,40 (1.000) 25,40 (1.000) 28,57 (1.125) H max. 31,75 (1.250) 31,75 (1.250) 39,70 (1.563) 39,70 (1.563) 42,88 (1.688) Round Cable Clamp 3,05 ,013 (.120 .005) DIA. TWO MTG. HOLES A C E B + + G F D MAX. CABLE ENTRY 0,38 0,13 (.015 .005) * Kit consists of 1 shell, 2 cable clamps, 2 screws, 2 hex nuts. RoHS Compliant Part Number DE DE44994-14 DA DA20961-26 DB DB20962-30 DC DC20963-27 DD DD20964-32 Shell Part Mil Spec A B Size Layout Number Part Number* 0,38 (.015) 0,572 (.0225) DE 9 DE44994 M85049/48-2-1F 30,68 (1.208) 12,70 (.500) DA 15 DA20961 M85049/48-2-2F 38,89 (1.531) 12,70 (.500) DB 25 DB20962 M85049/48-2-3F 52,78 (2.078) 12,70 (.500) DC 37 DC20963 M85049/48-2-4F 69,04 (2.718) 12,70 (.500) DD 50 DD20964 M85049/48-2-5F 66,68 (2.625) 15,47 (.609) * Parts may be ordered with "F" suffix. Part markings reflect base part number without "F" suffix. Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 7 C 0,38 (.015) 24,99 (.984) 33,33 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D max. 10,31 (.406) 10,31 (.406) 15,06 (.593) 18,23 (.718) 20,62 (.812) E 0,38 (.015) 16,79 (.661) 24,99 (.984) 38,48 (1.515) 55,14 (2.171) 53,16 (2.093) F 0,38 (.015) 3,18 (.125) 3,18 (.125) 4,75 (.187) 6,35 (.250) 7,92 (.312) G 0,76 (.030) 26,18 (1.031) 26,18 (1.031) 26,98 (1.062) 26,98 (1.062) 26,98 (1.062) Metal Backshell D Cannon D-Subminiature Accessories Short Straight Clamp A C B G 12,30 0,38 (.484 .015) * Kit consists of 1 shell, 2 or 3 screws, 2 or 3 hex nuts 3,05 0,13 (.120 .005) DIA. TWO MTG. HOLES F (TYP.) E CABLE ENTRY 0,38 0,13 (.015 .005) RoHS Compliant Part Number DA DA19678-212 DB DB19678-213 DC DC19678-214 DD DD19678-215 No. of Shell Part Mil Spec Cable Locking A Size Layout Number Part Number* Screws Included 0,38 (.015) DA 15 DA19678-1 M85049/48-3-2F 2 38,88 (1.531) DB 25 DB19678-2 M85049/48-3-3F 2 52,78 (2.078) DC 37 DC19678-3 M85049/48-3-4F 3 69,04 (2.718) DD 50 DD19678-4 M85049/48-3-5F 3 66,68 (2.625) * Parts may be ordered with "F" suffix. Part markings reflect base part number without "F" suffix. B 0,38 (.015) 12,70 (.500) 12,70 (.500)) 12,70 (.500) 15,47 (.690) C 0,13 (.005) 33,33 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) E 0,38 (.015) 7,51 (.296) 7,51 (.296) 7,51 (.296) 9,91 (.390) F 0,38 (.015) 7.93 (.312) 20,22 (.796) 17,45 (.687) 17,45 (.687) G 0,98 (.035) 16,36 (.644) 16,36 (.644) 16,36 (.644) 17,63 (.694) 90 Entry #4-40 NC-2B THD. TWO MTG. HOLES E CABLE ENTRY A 2,77 0,25 (.109 .010) B F CABLE ENTRY G H C * Kit consists of 1 shell, 1 cable clamp, 1 screw, 1 nut, 2 rivnuts (assembled) RoHS Compliant Part Number DE DE19977-72 DA DA19977-68 DB DB19977-69 DC DC19977-70 DD DD19977-71 Shell Part Mil Spec A B Size Layout Number Part Number* 0,38 (.015) 0,38 (.015) DE 9 DE19977-5 M85049/50-1F 30,56 (1.203) 18,24 (.718) DA 15 DA19977-1 M85049/48-2F 38,89 (1.531) 12,70 (.500) DB 25 DB19977-2 M85049/48-3F 52,78 (2.078) 12,70 (.500)) DC 37 DC19977-3 M85049/48-4F 69,04 (2.718) 12,70 (.500) DD 50 DD19977-4 M85049/48-5F 66,68 (2.625) 15,47 (.690) * Parts may be ordered with "F" suffix. Part markings reflect base part number without "F" suffix. 8 C 0,13 (.005) 24,99 (.984) 33,33 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) E 0,38 (.015) 11,10 (.437) 11,10 (.437) 11,10 (.437) 11,10 (.437) 14,28 (.562) F 0,38 (.015) 11,10 (.437) 11,10 (.437) 15,88 (.625) 20,63 (.812) 23,01 (.906) G 0,98 (.035) 11,89 (.468) 11,89 (.468) 11,89 (.468) 11,89 (.468) 13,47 (.531) H 7,14 (.281) 7,14 (.281) 7,14 (.281) 7,14 (.281) 8,71 (.343) Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com D Cannon D-Subminiature Accessories Plastic Backshell Plastic Backshell Snap -Together Universal 42,50 (1.673). B DIA. MAX. CABLE ENTRY 39,50 (1.555). C D * 2-piece snap-together design for quick assembly. * Customer furnishes tie-wrap. Materials and Finishes Material: Black Thermoplastic, UL 94V-0 rated Shell Part oB C D Size Layout Number max. 0,20 (.008) 0,20 (.008) DE 9 DE115339-20 7,01 (.276) 17,00 (.669) 19,51 (.768) DA 15 DA115339-21 9,60 (.378) 17,00 (.669) 27,79 (1.094) DB 25 DB115339-22 11,61 (.457) 17,00 (.669) 41,61 (1.638) DC 37 DC115339-23 13,00 (.512) 17,00 (.669) 59,99 (2.283) DD 50 DD115339-24 16,00 (.630) 19,81 (.780) 52,32 (2.060) Note: Part Numbers above replace the following part number series: DE110963-1 to DD110963-5 One-Piece Snap-Together A C 16,21 (.638) CLAMP, THERMOPLASTIC CLAMP, METAL * Low cost * Easy to assemble * Mounting hardware included * 2 thumbscrews, 2 cable clamps Materials and Finishes Backshell Material: Polypropylene Hardware Material: Steel Hardware Finish: Black Nickel Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com Shell Size DE DA DB DC DD Layout 9 15 25 37 50 Part Number DEBS-9 DABS-15 DBBS-25 DCBS-37 DDBS-50 9 + + E 48,00 (1.890) ITT CANNON D A 35,20 (1.386) 43,31 (1.705) 57,20 (2.252) 72,00 (2.83) 73,70 (2.90) C 24,99 (.984) 33,33 (1.312) 47,04 (1.852) 62,00 (2.44) 63,70 (2.50) oD max. 5,69 (.224) 5,69 (.224) 6,50 (.256) 7,80 (.307) 8,20 (.322) E 27,51 (1.083) 31,19 (1.228) 38,30 (1.508) 43,08 (1.69) 48,04 (1.89) Plastic Backshell D Cannon D-Subminiature Accessories One-Piece Plastic Straight Exit B oE F A C * Kit consists of 1 shell, 1 cable clamp, 1 set screw * Mounting hardware included * 2 screws #4-24 x 5/16 long self tapping * Accommodates spring latches Materials and Finishes Material: Black Thermoplastic, UL 94V-0 rated Hardware Material: Steel Hardware Finish: Chromate over Zinc G Cable Entry Cable Entry Cable Entry D TWO SCREWS 4-24 X 5/16 long SELF-TAPPING Shell Part A B Size Layout Number 0,38 (.015) 0,38 (.015) DE 9 DE51218 30,94 (1.218) 25,40 (1.000) DA 15 DA51210 39,27 (1.546) 25,40 (1.000) DB 25 DB51212 53,16 (2.093) 31,75 (1.250) DC 37 DC51214 69,44 (2.734) 38,10 (1.500) DD 50 DD51216 67,06 (2.640) 38,10 (1.500) C D oE 0,13 (.005) 0,38 (.015) 0,25 (.010) 24,99 (.984) 12,70 (.500) 7,14 (.281) 33,33 (1.312) 12,70 (.500) 9,14 (.360) 47,04 (1.852) 12,70 (.500) -- 63,50 (2.500) 12,70 (.500) -- 61,11 (2.406) 15,47 (.690) -- F 0,25 (.010) -- -- 12,52 (.493) 17,63 (.694) 18,64 (.734) G 0,25 (.010) -- -- 9.15 (.360) 9.15 (.360) 11,89 (.468) 90 Exit K Cable Entry A oH Cable Entry J B * Kit consists of 1 shell, 1 cable clamp, 1 set screw * Mounting hardware included * 2 screws #4-24 x 5/16 long self tapping Materials and Finishes Material: Black Thermoplastic, UL 94V-0 rated Hardware Material: Steel Hardware Finish: Chromate over Zinc C D Shell Part A B Size Layout Number 0,38 (.015) 0,38 (.015) DE 9 DE51219 37,95 (1.494) 25,40 (1.000) DA 15 DA51211 46,28 (1.822) 25,40 (1.000) DB 25 DB51213 60,15 (2.368) 31,75 (1.250) DC 37 DC51215 76,43 (3.009) 38,10 (1.500) DD 50 DD51217 74,04 (2.915) 38,10 (1.500) C D oH 0,13 (.005) 0,38 (.015) 0,25 (.010) 24,99 (.984) 12,70 (.500) 7,14 (.281) 33,33 (1.312) 12,70 (.500) 9,14 (.360) 47,04 (1.852) 12,70 (.500) -- 63,50 (2.500) 12,70 (.500) -- 61,11 (2.406) 15,47 (.690) -- Straight Exit - Metalized Plastic Low Cost J 0,25 (.010) -- -- 12,52 (.493) 17,63 (.694) 18,64 (.734) K 0,25 (.010) -- -- 9.15 (.360) 9.15 (.360) 11,89 (.468) 50 POSITION IS MARKED "CANNON ONLY C F B ITT CANNON OE D * Kit consists of 1 front shell, 1 rear shell, 1 cable clamp, 2 screws Shell Size Layout DE 9 DA 15 DB 25 DC 37 DD 50 Part Number 980-2000-350 980-2000-351 980-2000-352 980-2000-353 980-2000-354 A A B C D oE F 30,91 (1.217) 39,24 (1.545) 53,09 (2.090) 69,44 (2.734) 67,18 (2.645) 39,29 (1.547) 38,23 (1.505) 42,04 (1.655) 46,48 (1.830) 47,12 (1.855) 16,26 (.640) 16,26 (.640) 18,03 (.710) 23,01 (.906) 23,88 (.940) 16,26 (.640) 16,26 (.640) 16,26 (.640) 16,26 (.640) 19,56 (.770) 10,16 (.400) 10,16 (.400) 13,26 (.522) 18,44 (.726) 18,44 (.726) 24,99 (.984) 33,32 (1.312) 47,17 (1.857) 63,50 (2.500) 61,11 (2.406) Materials and Finishes Material: Thermoplastic, UL 94V-0 rated 10 Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com D Cannon D-Subminiature Accessories Locking Hardware Screw Lock Assemblies ITT offers the largest variety of locking and latching hardware. Refer to the accessories selection guide on pages 2-3 for use with Cannon backshells. Rear Panel Mount Front Panel Mount Product Features * Ensures positive mating * Provides locking and latching for high vibration applications SCREW CLIP WITH THREAD D SUBMINATURE CONNECTOR PIN OR SOCKET NUT SCREW D SUBMINATURE CONNECTOR PIN OR SOCKET CLIP WITH THREAD MOUNTING PANEL NUT WASHER MOUNTING PANEL LOCK WASHER HEX NUT WASHER LOCK WASHER D SUBMINATURE CONNECTOR PIN OR SOCKET HEX NUT Male Screw Lock SCREW #4-40 UNC-2A THD A B C CLIP GAP * Kit consists of 1 screw and 1 clip * Order 2 per connector Materials and Finishes Material: Finish: Shell Size DE, DA, DB, DC DE, DA, DB, DC DE, DA, DB, DC DE, DA, DB, DC DD DD DD DD Steel Zinc Chromate each P/N D20419 D20419-18 D20419-21 D20419-104 D20420 D20420-13 D20420-15 D20420-86 2 each P/N D20419-119 D20419-121 D20419-122 D20419-216 D20420-097 D20420-099 D20420-100 D20420-162 Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com CLIP A 0,38(1.5) 14,10 (.555) 14,10 (.555) 14,10 (.555) 14,10 (.555) 16,66 (.656) 16,66 (.656) 16,66 (.656) 16,66 (.656) B 0,2 (.010) 6,35 (.250) 7,14 (.281) 7,14 (.281) 7,92 (.312) 6,35 (.250) 7,14 (.281) 7,14 (.281) 7,92 (.312) 11 C 0,13 (.005) 1,22 (.048) 1,70 (.067) 2,34 (.092) 2,34 (.092) 1,22 (.048) 1,70 (.067) 2,34 (.092) 2,34 (.092) RoHS Compliant P/N each D20419-211 D20419-212 D20419-213 D20419-214 D20420-157 D20420-158 D20420-159 D20420-160 RoHS Compliant P/N 2 each D20419-218 D20419-219 D20419-220 D20419-221 D20420-163 D20420-164 D20420-165 D20420-166 Locking Hardware D Cannon D-Subminiature Accessories Rear Panel Mount Front Panel Mount Female Screw Lock 6,35 (.250) APPROX. REMOVE ONE WASHER FOR EACH 0,76 (.030) OF PANEL THICKNESS WHEN REAR MOUNTING 1,52 (0.60) MAX. PANEL #4-40 NC-2B THD. 4,78 0,38 (.188 .015) Hex across Flats A 4,78 0,38 (.188 .015) REAR FLANGE (REF.) #4-40 NC-2A THD * Kit consists of 1 nut, 3 washer, 1 lock washer, 1 hex nut. * Order 2 per connector. Material: Finish: Spec) NOTE: (1) A 6 inch/pound (female) and 4 inch/pound (male) maximum torque during assembly is recommended on steel screw lock assemblies. (2) A third flat washer is supplied for front panel mounting of tab shell connectors. Steel Chromate over Cadmium (Mil or Zinc (RoHS) Yellow Chromate each D20418-2 D20418-50 D20418-39 D20418-74 Over Cadmium Kit of 2 each D20418-82 D20418-131 D20418-83 D20418-132 Chromate Over Zinc Kit of 2 each D20418-138 D20418-139 D20418-140 D20418-141 RoHS Compliant Part Number D20418-134 D20418-135 D20418-136 D20418-137 A 0,38 (.015) 7,92 (.312) 12,70 (.500) 15,88 (.625) 19,05 (.750) Screw Locks for Connectors with Integral Threaded Inserts 3,50 (.138) MIN THD A 5,75 (.226) Part Number D121073-39 D112041 * D121073-42 * without lock washer 4,50 (.177) 5,00 (.197) HEX (ACROSS FLATS) THD B 3,50 (.138) MIN THD A # 4-40 UNC-2B # 4-40 UNC-2B M3 Thread Code THD B # 4-40 UNC-2A # 4-40 UNC-2A M3 * Kit consists of 1 jackpost, 1 lock washer. * Order 2 per connector. Spacer Part Number: 253-0343-000 (D*M Style) Dim A 5.84 .08 (.230 .003) Part Number: 253-0343-011 (D*MA Style) 9.40 .13 (.370 .005) Material: Finish: A .120 .116 Aluminum Chromate over Cadmium 12 .192 .182 Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com D Cannon D-Subminiature Accessories Locking Hardware Screw Lock Assemblies ITT offers the largest variety of locking and latching hardware. Refer to the accessories selection guide on pages 2-3 for use with Cannon backshells. #4-40 HEX. NUT LOCK WASHER Product Features * Ensures positive mating * Provides locking and latching for high vibration applications SLIDE LATCH #4-40 SCREW FLAT WASHERS #4-40 POST LOCK WASHER HEX NUT Sliding Lock Retainer Assembly 2 SCREWS #4-40 NC-2A THREAD 2,84 (.112) 3,66 0,38 (.144 .015) RETAINER SLIDING LOCK A 2,36 (.093) TRAVEL REF. C B * Ideal for Ethernet Applications * Kit consists of 1 sliding lock plate, 2 mounting screws, 2 lock washer, 2 hex nuts * Order 1 kit per connector Descriptions Sliding Lock Plate Screw, Mounting Washer Lock Nut, Hex Material Finish/ Treatment Stainless Steel Passivated Steel Trivalent Chromate over Zinc Shell Size DE DA DB DC DD Layout 9 15 25 37 50 Part Number DE51224-1 DA51220-1* DB51221-1 DC51222-1 DD51223-1 A 0,38 (.015) 35,05 (1.380) 43,70 (1.720) 57,40 (2.260) 73,86 (2.908) 71,47 (2.814) B 0,38 (.015) 12,70 (.500) 12,70 (.500) 12,70 (.500) 12,70 (.500) 15,47 (.609) C 0,13 (.005) 25,00 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) * Meets IEEE 802.3 Ethernet Specification Slide Lock Post Assemblies SPACER WASHER LOCK WASHER #4-40 HEX NUT 4,60 (.180) HEX * Consists of 1 post, 2 washers, 1 lock washer, and 1 hex nut.1 * Order 2 per connector.2 Part Number: Each1,2 D53018 D53018-14 Kit of 2 each D53018-11 D53018-20 Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 2,59 (.102) 0,13 (.005) 10,57 (.416) 0,25 (.010) Material: Steel, Finish: Chromate/Zinc Material: Stainless Steel, Finish: Passivated 13 NOTE: When rear-mounting connector to a 1/16" panel, delete the 2 washer. Locking Hardware D Cannon D-Subminiature Accessories Spring Latch Assemblies ITT offers the largest variety of locking and latching hardware. Refer to the accessories selection guide on pages 2-3 for use with Cannon backshells. Locked Unlocked Product Features * Low Cost * Minimizes field connection time * Positive lock between connectors * Packaged 2 kits per bag Materials and Finishes Material: Stainless Steel Treatment: Passivated Spring Latch Plate Assembly #4-40 SCREW 15,37 0,64 (.605 .025) #4-40 THD. x 7,92 (.312) LONG SCREW 2,41 (.095) 1,52 (.060) A B LATCH PLATE #4-40 HEX. NUT CONNECTOR EITHER PIN OR SOCKET Shell Size DE, DA, DB, DC DD Part Number D110278 D110280 Layout 9,15, 25, 37 50 A 0,38 (.015) 12,42 (.489) 15,47 (.609) B 0,38 (.015) 14,35 (.565) 17,09 (.673) Part Number Kit of 2 each D110278-4 D110280-3 LOCK WASHER #4-40 HEX NUT * Kit consists of 1 plate, 1 screw, 1 lock washer,1 hex nut. * Order 2 kits per connector. Spring Latch Assembly SPRING LATCH 15,57 0,64 #4-40 SCREW #4-40 THD. x 7,92 (.312) LONG SCREW (.613 .025) B A C *2,41 (.095) - 1,52 (.060) SPRING LATCH MOUNTING BRACKET #4-40 HEX. NUT CONNECTOR EITHER PIN OR SOCKET Shell Size DE, DA, DB, DC DD Layout 9,15, 25, 37 50 Part Number D110277 D110279 A 0,38 (.015) 12,42 (.489) 15,47 (.609) B 0,38 (.015) 14,35 (.565) 17,09 (.673) C 0,51 (.020) 18,59 (.732) 18,59 (.732) Part Number Kit of 2 each D110277-2 D110279-3 D110277-4 Rear panel mount version LOCK WASHER #4-40 HEX. NUT * Kit consists of 1 spring, 1 screw, 1 bracket, 1 lock washer, 1 hex nut. * Order 2 kits per connector. Front panel mounting. 14 Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com Locking Hardware D Cannon D-Subminiature Accessories Jackscrew/Jackpost Assemblies ITT offers the largest variety of locking and latching hardware. Refer to the accessories selection guide on pages 2-3 for use with Cannon backshells. Jackscrew Assembly Jackpost Assembly HEAD, JACKSCREW # 2-56 UNC THD # 4-40 UNC THD # 4-40 UNC-2B THD RETAINING COMPOUND # 4-40 UNC-2A THD WASHER, #4 LOCK O 3,05 (.120) #4 HEX NUT STUD, JACKSCREW FEMALE POST O 3,05 (.120) Jackscrew Assembly 0,89 (.035) 0,13 (.005) 5,59 (.220) DIA. MAX. 9,40 (.370) MAX. 1,73 (.068) MAX. 16,26 (.640) MAX. * Kit consists of 2 studs, 2 heads, 1 tube retaining compound (US only) * Order one kit per connector Part Number: Materials and Finishes Material: Treatment: 4,57 (.180) MAX. D110550 #4-40 UNC THREAD 5,59 (.220) DIA. MAX. Stainless Steel Passivated 0,64 (.025) 0,13 (.005) Jackpost Assembly 4,75 (.187) HEX (ACROSS FLATS) CONNECTOR ASSY #4-40 UNC THREAD 5,84 (.230) 0,13 (.005) 14,10 (.555) 0,13 (.005) * Kit consists of 2 posts, 2 hex nuts, 2 lock washer * Order one kit per connector 1,14 (.045) 0,13 (.005) 5,59 (.220) MIN. PERFECT THD. PANEL 3,18 (.125) MAX. LOCK WASHER HEX NUT Part Number: Materials and Finishes Material: Treatment: Stainless Steel Passivated Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com #4-40 UNC THREAD D110551 NOTE: Jack post is not compatible with rear-panel mount connectors. 15 Guide Pin Plate D Cannon D-Subminiature Accessories Guide Pin Plate Female 9,60 (.378) MAX A MOUNTING PANEL B E + + F * Useful in blind mate applications. * Kit consists of 1 plate, 2 screws. * Guide pin inserts for Size 8 cavities for Combo D(R) connectors also available. Part Number DE111920 DA22214 DB22254 DC22071 DD21961 A 0,41 (.016) 49,61 (1.953) 57,96 (2.282) 71,63 (2.820) 88,11 (3.469) 85,72 (3.375) F G + 1,57 (.062) 6,35 (.250) MAX. SOLDER POT EXTENSION C D 4,04 (.159) DIA. MIN. 2 PLACES MOUNTING HOLE NO. 4.40 UNC-2B THREAD (SCREW SUPPORT) 2 PLACES Plate and Hardware Material: Steel Plate and Hardware Finish: Chromate over Zinc Shell Size Layout DE 9 DA 15 DB 25 DC 37 DD 50 + + B 0,13 (.005) 40,08 (1.578) 48,41 (1.906) 62,13 (2.446) 78,59 (3.094) 76,20 (3.000) C 0,13 (.005) 25,00 (.986) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) 61,11 (2.406) D 0,13 (.005) 18,65 (.734) 22,81 (.898) 29,67 (1.168) 37,90 (1.492) 36,50 (1.437) E F 0,13 (.005) 0,13 (.005) 15,27 (.601) 9,52 (.375) 19,43 (.765) 9,52 (.375) 26,29 (1.035) 9,52 (.375) 34,52 (1.359) 9,52 (.375) 33,32 (1.312) 11,10 (.437) G 0,41 (.016) 25,40 (1.000) 25,40 (1.000) 25,40 (1.000) 25,40 (1.000) 28,58 (1.125) 1,60 (.063) 0,41 (.016) RAD. 4 PLACES H J K 0,41 (.016) 0,41 (.016) 0,41 (.016) 30,58 (1.204) 12,29 (.484) 6,15 (.242) 38,91 (1.532) 12,29 (.484) 6,15 (.242) 51,21 (2.016) 11,91 (.469) 5,94 (.234) 67,49 (2.657) 11,91 (.469) 5,94 (.234) 65,10 (2.563) 14,30 (.563) 7,16 (.282) Recommended Panel Cutout K RADIUS 4,22 0,05 (.166 .002) DIA. 2 PLACES B E 3,66 0,13 (.144 .005) DIA. 2 PLACES + + + F + F + J D H 16 Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com D Cannon D-Subminiature Accessories Guide Pin Plate Guide Pin Plate Male A 4,78 0,30 (.188 0.12) 6,35 (.250) MAX SOLDER POT EXTENSION B C 1,57 (.062) MAX. D 3,66 0,13 (.144 .005) 2 PLACES ITT CANNON 4,01 (.158) DIA. MAX. * Useful in blind mate applications. * Kit consists of 1 plate, 2 sems screws, 2 rivets, 2 guide pins, 2 washer * Guide pin inserts for Size 8 cavities for Combo D(R) connectors also available. 4,06 (.160) REF DIA MAX. 1,57 0,13 (.062 .005) 22,22 0,76 (.875 .030) Part Number DE111919 DA22213 DB22255 DC22070 DD21962 A 0,41 (.016) 49,61 (1.953) 57,96 (2.282) 71,63 (2.820) 88,11 (3.469) 85,72 (3.375) B 0,13 (.005) 40,08 (1.578) 48,41 (1.906) 62,13 (2.446) 78,59 (3.094) 76,20 (3.000) G 4,06 0,25 (.160 .010) C 0,13 (.005) 33,91 (1.335) 42,24 (1.663) 55,96 (2.203) 72,42 (2.851) 69,82 (2.749) D 0,13 (.005) 18,65 (.734) 22,81 (.898) 29,67 (1.168) 37,90 (1.492) 36,50 (1.437) E F G H 0,13 (.005) 0,13 (.005) 0,41 (.016) 0,41 (.016) 25,40 (1.000) 19,05 (.750) 25,00 (.984) 12,29 (.484) 25,40 (1.000) 19,05 (.750) 33.32 (1.312) 12,29 (.484) 25,40 (1.000) 19,05 (.750) 47,04 (1.852) 12,29 (.484) 25,40 (1.000) 19,05 (.750) 63,50 (2.500) 12,29 (.484) 28,58 (1.125) 22,20 (.874) 61,11 (2.406) 15,06 (.593) Recommended Panel Cutout B C K RADIUS D + F H + + + + 3,66 0,13 DIA. (.144 .005) 2 PLACES + CL J Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com E CL 8,71 0,38 (.343 .015) Plate and Hardware Material: Steel Plate and Hardware Finish: Chromate over Zinc Guide Pin Material: Stainless Steel Shell Size Layout DE 9 DA 15 DB 25 DC 37 DD 50 F 17 5,54 0,13 DIA. (.218 .005) 2 PLACES J K 0,41 (.016) 0,41 (.016) 30,58 (1.204) 6,15 (.242) 38,89 (1.531) 6,15 (.242) 51,99 (2.047) 6,15 (.242) 68,25 (2.687) 6,15 (.242) 66,93 (2.635) 7,52 (.296) Connector Saver D Cannon D-Subminiature Accessories Connector Saver Engaging Face, Pin Side 21,95 0,51 (.864 .020) A B C 5,97 0,25 (.235 .010) 6,17 0,25 .243 .010 INSULATOR ASSY. SOCKET 2X 11 9 CONTACT SHELL PIN FRONT SHELL SOCKET FRONT SPACER NOTE: Hardware removed for clarity. Shell Size DE DA DB DC Layout 9 15 50 37 Part Number DEBMA9PS DABMA15PS DBBMA25PS DCBMA37PS A 0,40 (.015) 30,81 (1.213) 39,14 (1.541) 53,04 (2.088) 69,32 (2.729) B 0,25 (.010) 24,99 (.984) 33,32 (1.312) 47,04 (1.852) 63,50 (2.500) C 0,25 (.010) 16,92 (.666) 25.25 (.994) 38,96 (1.534) 55,42 (2.182) DD 50 DDBMA50PS 66,93 (2.635) 61,11 (2.406) 52,81 (2.079) Specifications Temperature: -55 C to 105 C Current Rating: 7 A Dielectric withstanding Voltage: 500 VAC at Sea Level Materials and Finishes Description Material Shells Steel Insulator Black Thermoplastic, UL 94V-0 Contacts Copper Alloy Spacer Zinc Alloy Locking Hardware Steel 18 Finish Chromate Over Zinc -- Gold Over Nickel -- Clear Chromate Over Zinc Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com D Cannon D-Subminiature Accessories Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 19 Miscellaneous D Cannon D-Subminiature Accessories Dust Cap RAISED GATE MARK R. TYP. 6,35 (.250) A B ITT CANNON XX-XX-XX C Dust caps provide protection from moisture and dust for unused I/O ports. Product Features * Conductive Dust Caps provide a surface resistivity of at least 1 x 105 ohms/sq * Dust Caps meet the static decay test requirements of MIL-B- 81705C, Type II. * Dust Caps have an integral flange for easy application and removal Materials and Finishes Material: Polyethylene D 1,02 .04 WALL TYP. B NOTE: C dim. applies at point of maximum Integral interface length. Drawing shown for Black Anti-static caps. Dimensions shown are reference only. Black Antistatic DE-59-20BA DA-59-20BA DB-59-20BA DC-59-20BA DD-59-20BA DE-60-20BA DA-60-20BA DB-60-20BA DC-60-20BA DD-60-20BA Red Caps DE-59-20RC DA-59-20RC DB-59-20RC DC-59-20RC DD-59-20RC DE-60-20RC DA-60-20RC DB-60-20RC DC-60-20RC DD-60-20RC I.D. Socket Socket Socket Socket Socket Pin Pin PIn Pin Pin A 20,32 (.800) 28,45 (1.120) 42,42 (1.670) 58,93 (2.320) 56,90 (2.240) 21,84 (.860) 30,48 (1.200) 44,20 (1.740) 60,71 (2.390) 58,17 (2.290) B 11,43 (.450) 11,68 (.460) 11,68 (.460) 11,68 (.460) 14,48 (.570) 12,95 (5.10) 12,95 (.510) 13,46 (.530) 13,46 (.530) 16.00 (.630) C 16,36 (.644) 24,59 (.968) 38,25 (1.506) 54,81 (2.158) 53,11 (2.091) 17,78 (.700) 26,52 (1.044) 39,60 (1.559) 56,90 (2.240) 54,28 (2.137) D 7,59 (2.99) 7,62 (.300) 7,49 (.295) 7,37 (.290) 10,41 (.410) 8,92 (.351) 9,02 (.355) 9,09 (.358) 9,37 (.369) 12.04 (.474) Interfacial Seal 10 TYP. A B Interfacial seals provide moisture resistance at the mating interface. Product Features * Other Interfacial Seals in the Combo D(R) layout are available upon request. Material: Silastic Sheet 0,79 + 0,38 - 0.00 (.031 + .015 - .000) o 0,91 +_ 0,18 (.036 +_ .007) DIA. TYP. Shell Size DE DA DB DC DD DC DE DA DB DC Layout 9 15 25 37 50 21WA4 15 26 44 62 Part Number DE53750 DA53750-1 DB53750-2 DC53750-3 DD53750-4 075-0354-003 273-0333-000 273-0334-000 273-0335-000 273-0336-000 A 16,66 (.656) 24,99 (.984) 38,88 1.531) 55,14 (2.171) 52,78 (2.078) 55,14 (2.171) 16,66 (.656) 24,99 (.984) 38,88 1.531) 55,14 (2.171) B 8,41 (.331) 8,41 (.331) 8,41 (.331) 8,41 (.331) 11,10 (.437) 8,41 (.331) 8,41 (.331) 8,41 (.331) 8,41 (.331) 8,41 (.331) Potting Shell 15,20 (.600) + + 4,70 (.185) 0,76 (.030) 3,25 (.128) DIA. Potting shells are molded with a thin flange 0,76 (.030) to permit the use of D Submarine locking devices. Materials and Finishes Material: Color: Nylon Natural (white) Shell Size DE DA DB DC DD 20 Layout 9 15 25 37 50 Part Number DE50904-1 DA50905-1 DB50906-1 DC50907-1 DD50908-1 Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com D Cannon D-Subminiature Accessories StandardRoHS Part # 075-0354-003 250-8501-004 250-8501-009 250-8501-010 250-8501-013 273-0333-000 273-0334-000 273-0335-000 273-0336-000 273-0337-000 980-2000-345 980-2000-346 980-2000-347 980-2000-348 980-2000-350 980-2000-351 980-2000-352 980-2000-353 980-2000-354 980-2000-355 D110277 D110278 D110279 D110280 D110550 D110551 D121073-19 D121073-39 D121073-42 D20418-2 D20418-39 D20418-50 D20418-74 D20419 D20419-104 D20419-18 D20419-21 D20420 D20420-13 D20420-15 D20420-86 D53018 DA111806-1 DA111806-5 DA111806-5 DA111810 DA115339-21 DA121073-150 Part # Page Same Same Same Same Same Same Same Same Same Same Same Same Same Same Same Same Same Same Same Same Same Same Same Same Same Same Same Same Same D20418-134 D20418-136 D20418-135 D20418-137 D20419-211 D20419-214 D20419-212 D20419-213 D20420-157 D20420-158 D20420-159 D20420-160 Same Same Same Same Same Same Same # 20 5 5 5 5 20 20 20 20 20 6 6 6 6 10 10 10 10 10 10 14 14 14 14 15 15 5 12 12 12 12 12 12 11 11 11 11 11 11 11 11 13 19 19 19 19 9 4 Specifications and dimensions subject to change www.ittcannon.com StandardRoHS Part # DA121073-50 DA19678-1 DA19977-1 DA20961 DA22213 DA22214 DA24658 DA50905-1 DA51210 DA51211 DA51220-1 DA53750-1 DA-59-20 DA-60-20 DABMA15PS DABS-15 DB111807-1 DB111807-5 DB111807-5 DB111811 DB115339-22 DB121073-151 DB121073-51 DB19678-2 DB19977-2 DB20962 DB22254 DB22255 DB24659 DB50906-1 DB51212 DB51213 DB51221-1 DB53750-2 DB-59-20 DB-60-20 DBBMA25PS DBBS-25 DC111808-1 DC111808-5 DC115339-23 DC121073-152 DC121073-52 DC19678-3 DC19977-3 DC20963 DC22070 DC22071 Part # Page Same DA19678-212 DA19977-68 DA20961-26 Same Same DA24658-28 Same Same Same Same Same Same Same Same Same Same Same Same Same Same Same Same DB19678-213 DB19977-69 DB20962-30 Same Same DB24659-27 Same Same Same Same Same Same Same Same Same Same Same Same Same Same DC19678-214 DC19977-70 DC20963-27 Same Same 21 # 4 8 8 7 17 16 7 20 10 10 13 20 20 20 18 9 19 19 19 19 9 4 4 8 8 7 16 17 7 20 10 10 13 20 20 20 18 9 19 19 9 4 4 8 8 7 17 16 StandardRoHS Part # Part # DC24660 DC50907-1 DC51214 DC51215 DC51222-1 DC53750-3 DC-59-20 DC-60-20 DCBMA37PS DD115339-24 DD121073-153 DD121073-53 DD19678-4 DD19977-4 DD20964 DD21961 DD21962 DD24661 DD50908-1 DD51216 DD51217 DD51223-1 DD53750-4 DD-59-20 DD-60-20 DDBMA50PS DE111805-1 DE111805-5 DE111805-5 DE111813 DE111919 DE111920 DE115339-20 DE121073-154 DE121073-54 DE19977-5 DE24657 DE44994 DE50904-1 DE51218 DE51219 DE51224-1 DE53750 DE-59-20 DE-60-20 DEBMA9PS DEBS-9 Page DC24660-4 Same Same Same Same Same Same Same Same Same Same Same DD19678-215 DD19977-71 DD20964-32 Same Same DD24661-3 Same Same Same Same Same Same Same Same Same Same Same Same Same Same Same Same Same DE19977-72 DE24657-29 DE44994-14 Same Same Same Same Same Same Same Same Same # 7 20 10 10 13 20 20 20 18 9 4 4 8 8 7 16 17 7 20 10 10 13 20 20 20 18 19 19 19 19 17 16 9 4 4 8 7 7 20 10 10 13 20 20 20 18 9 D Product Safety Information 1. MATER IAL CON TENT AND P HY S IC AL F OR M Electrical connectors do not usually contain hazardous materials. They contain conducting and non-conducting materials and can be divided into two groups. a) Printed circuit types and low cost audio types which employ all plastic insulators and casings. b) Rugged, Fire Barrier and High Reliability types with metal casings and either natural rubber, synthetic rubber, plastic or glass insulating materials. Contact materials vary with type of connector and also application and are usually manufactured from either: Copper, copper alloys, nickel, alumel, chromel or steel. In special applications, other alloys may be specified. 2. F IRE CHAR AC TER ISTIC S AND EL EC TRIC S HO C K HA Z A R D The re i s n o fi re h a za rd w h e n t he c on n ec t or i s c o r r e c tl y w i r e d a n d u s e d w i th i n th e sp eci f ie d pa r am e te rs . In co r re ct w i r in g o r a s s e m b l y o f t h e c o n n e c t o r o r c ar e l e s s u s e o f m e ta l t o ol s o r c o nd u c ti v e f l ui d s , o r t r a n s i t d a m a ge t o a n y o f t h e c o m p o n e n t p a r t s m a y ca u s e e l e c t r i c s h o ck o r b u r n s . L i ve ci rc u it s m u st n ot be b ro ken by se pa r a t i n g m a t e d c o n n e ct o r s a s t h i s m a y ca u se a rc i ng , io n i za ti o n a nd bu rn in g . Heat dissipation is greater at maximum resistance in a circuit. Hot spots may occur when resistance is raised locally by damage, e.g. cracked or deformed contacts, broken strands of wire. Local overheating may also result from the use of the incorrect application tools or from poor quality soldering or slack screw terminals. Overheating may occur if the ratings in the product Data Sheet/Catalog are exceeded and can cause breakdown of insulation and hence electric shock. If heating is allowed to continue it intensifies by further increasing the local resistance through loss of temper of spring contacts, formation of oxide film on contacts and wires and leakage currents through carbonization of insulation and tracking paths. Fire can then result in the presence of combustible materials and this may release noxious fumes. Overheating may not be visually apparent. Burns may result from touching overheated components. 3 . HA N D L I N G Care must be taken to avoid damage to any component parts of electrical connectors during installation and use. Although there are normally no sharp edges, care must be taken when handling certain components to avoid injury to fingers. Electrical connectors may be damaged in transit to the customers, and damage may result in creation of hazards. Products should therefore be examined prior to installation/use and rejected if found to be damaged. 4. D IS P OS AL Incineration of certain materials may release noxious or even toxic fumes. 5. AP P L IC ATION Connectors with exposed contacts should not be selected for use on the current supply side of an electrical circuit, because an electric shock could result from touching exposed contacts on an unmated connector. Voltages in excess of 30 V ac or 42.5 V dc are potentially hazardous and care should be taken to ensure that such voltages cannot be transmitted in any way to exposed metal parts of the connector body. The connector and wiring should be checked, before making live, to have no damage to metal parts or insulators, no solder blobs, loose strands, conducting lubricants, swarf, or any other undesired conducting particles. Circuit resistance and continuity check should be made to make certain that there are no high resistance joints or spurious conducting paths. Always use the correct application tools as specified in the Data Sheet/Catalog. Do not permit untrained personnel to wire, assemble or tamper with connectors. For operation voltage please see appropriate national regulations. IMP OR TANT GEN ERAL INFOR MATION (i ) Ai r a n d cr ee pa g e pa t hs /Ope ra t i ng v ol t a g e . The admissible operating voltages depend on the individual applications and the valid national and other applicable safety regulations. For this reason the air and creepage path data are only reference values. Observe reduction of air and creepage paths due to PC board and/or harnessing. P ROD UC T WAR RANTY ITT Electronic Components, a division of ITT Corporation, manufactures the highest quality products available in the marketplace; however these products are intended to be used in accordance with the specifications in this publication. Any use or application that deviates from the stated operating specifications is not recommended and may be unsafe. No information and data contained in this publication shall be construed to create any liability on the part of ITT. Any new issue of this publication shall automatically invalidate and supersede any and all previous issues. A limited warranty applies to Cannon products. Except for obligations assumed by ITT under this warranty, ITT shall not be liable for any loss, damage, cost of repairs, incidental or consequential damages of any kind, whether or not based on express or implied warranty, contract, negligence or strict liability arising in connection with the design, manufacture, sale, use or repair of the products. Product availability, prices and delivery dates are exclusively subject to our respective order confirmation form; the same applies to orders based on development samples delivered. This publication is not to be construed as an offer. It is intended merely as an invitation to make an offer. By this publication, ITT does not assume responsibility or any liability for any patent infringements or other rights of third parties which may result from its use. Reprinting this publication is generally permitted, indicating the source. However, ITT's prior consent must be obtained in all cases. (i i ) Tem per a tu re All information given are temperature limits. The operation temperature depends on the individual application. (i i i) Ot h er i mp or ta n t i nf or m at i o n ITT continuously endeavors to improve their products. Therefore, Cannon products may deviate from the description, technical data and shape as shown in this catalog and data sheets. "Engineered for life" and "Cannon" are registered trademarks of ITT Corporation (c)2007. All data subject to change without notice. 22 Specifications and dimensions subject to change www.ittcannon.com Rack & Panel Connectors ITT is the world leader in rack and panel connectors, offering unmatched variety of shell configurations and insert arrangements, materials, plating and contact options. Many of our standard and custom designs meet the stringent requirements of ARINC 600, ARINC 404 (MIL-C-81659), and MIL-DTL-83733 standards. www.ittcannon.com/rackandpanel Circular/Filter/Hermetic Connectors As a world leader in circular, filter and hermetic connectors, ITT can leverage its design and manufacturing expertise to fit virtually any application. Our expertise includes fast positive mating for a wide range of military applications, as well as numerous sizes and contact configuration for various harsh environments. ITT can also meet numerous specs, including NATO and MIL standards. www.ittcannon.com/circulars * www.ittcannon.com/filter * www.ittcannon.com/hermetics D-Subminiature Connectors Cannon invented D-sub connectors in 1952. Our family of D-Subs now includes combinations of signal, power and RF, as well as severe service sealed connectors. Cannon D-Subs are available with an extensive line of backshells and accessories and are one of the most economical shielded connector solutions available. Qualified to the MIL-DTL-24308 specification. www.ittcannon.com/dsubs Fiber Optic Connectors and Cable Assemblies Cannon fiber optic solutions provide an excellent performance/cost value. Performance can be tailored to the end system, and our use of superior materials and bonding agents provides highly effective solutions. Our wide variety of products includes fiber optic hybrid contacts, multi-channel, rack and panel, and hi-rel assemblies, including MIL and ARINC standard solutions. www.ittcannon.com/fiberoptics Microminiature Connectors Cannon microminiature connectors offer high performance and reliability with exceptional versatility. Available in rectangular, circular and strip configurations for countless applications, many of our connectors meet or exceed applicable requirements of the MIL-DTL-83513 specification. www.ittcannon.com/micro ITT's Electronic Components business (www.ittcannon.com) is an international supplier of connectors, interconnects, cable assemblies, I/O card kits and smart card systems. As a worldwide leader in connector technology for nearly a century, ITT offers one of the industry's broadest product offerings, manufacturing capability worldwide, fast time to market, high volume/high yield capacity, robust design and Value-Based Product Development and an extensive sales and customer support network. Customer Support Locations ASIA Tuopandun Industrial Area, Jinda Cheng, Xiner Village, Shajing Town, Baoan District, Shenzhen City, Guangdong, China 518125 Tel: +86 755 2726 7238 Fax: +86 755 2726 7515 GERMANY Cannonstrasse 1 Weinstadt, 71384 Tel: +49.7151.699.0 Fax: +49.7151.699.217 ITALY Corso Europa 41/43 Lainate (MI), Italy 20020 Tel: +39.02938721 Fax: +39.0293872300 UK Jays Close, Viables Estate Basingstoke, Hants, RG22 4BA Tel: +44.1256.311200 Fax: +44.1256.323356 USA 666 East Dyer Road Santa Ana, CA 92705 Tel: 714.557.4700 Fax: 714.628.2142 www.ittcannon.com (c)2007 ITT Corporation. "Engineered for life" and "Cannon" are registered trademarks of ITT Corporation. Specification and other data are based on information available at the time of printing, and are subject to change without notice. DSA-sept-07