SMAJ5.0(C)A - SMAJ200(C)A Green 400W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR Features Mechanical Data * * * * * * * * * 400W Peak Pulse Power Dissipation Glass Passivated Die Construction Unidirectional and Bidirectional Versions Available Excellent Clamping Capability Fast Response Time Lead Free Finish/RoHS Compliant (Note 1) Green Molding Compound (No Halogen and Antimony) (Note 2) * * * * Top View Case: SMA Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Terminals: Lead Free Plating (Matte Tin Finish). Solderable per MIL-STD-202, Method 208 Polarity Indicator: Cathode Band (Note: Bi-directional devices have no polarity indicator.) Weight: 0.064 grams (approximate) Bottom View Ordering Information (Note 3) Part Number SMAJXXX(C)A-13-F Case SMA Packaging 5000/Tape & Reel *x = Device Voltage, e.g., SMCJ170A-13-F. Example: SMAJ170A-13-F. Notes: 1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied, see EU Directive 2002/95/EC Annex Notes 2. Product manufactured with Date Code 0924 (week 24, 2009) and newer are built with Green Molding Compound. 3. For packaging details, go to our website at http://www.diodes.com. Marking Information xx = Product type marking code (See Electrical Characteristics Table) = Manufacturers' code marking YWW = Date code marking Y = Last digit of year (ex: 2 for 2002) WW = Week code (01 to 53) YWW xx Maximum Ratings @TA = 25C unless otherwise specified Characteristic Peak Pulse Power Dissipation (Note 4) (Non repetitive current pulse derated above TA = 25 C) Peak Forward Surge Current, 8.3ms Single Half Sine Wave Superimposed on Rated Load (Notes 4, 5 & 6) Steady State Power Dissipation @ TL = 75C Instantaneous Forward Voltage @ IPP = 35A (Notes 4, 5, & 6) Notes: Symbol Value Unit PPK 400 W IFSM 40 A PM(AV) 1.0 W VF 3.5 V Value -55 to +150 -55 to +175 Unit C C 4. Valid provided that terminals are kept at ambient temperature. 5. Measured with 8.3ms single half sine-wave. Duty cycle = 4 pulses per minute maximum. 6. Unidirectional units only. Thermal Characteristics Characteristic Operating Temperature Range Storage Temperature Range SMAJ5.0(C)A - SMAJ200(C)A Document number: DS19005 Rev. 16 - 2 Symbol TJ TSTG 1 of 5 www.diodes.com January 2012 (c) Diodes Incorporated SMAJ5.0(C)A - SMAJ200(C)A Electrical Characteristics @TA = 25C unless otherwise specified Breakdown Test Voltage Current VBR @ IT (Note 8) Min (V) Max (V) IT (mA) 6.40 7.25 10 6.67 7.37 10 Max. Reverse Leakage @ VRWM (Note 9) IR (A) 800 800 VC (V) 9.2 10.3 Max. Peak Pulse Current Ipp (A) 43.5 38.8 500 200 100 50 10 5.0 5.0 11.2 12.0 12.9 13.6 14.4 15.4 17.0 1.0 1.0 1.0 1.0 1.0 1.0 5.0 5.0 5.0 5.0 5.0 5.0 20.9 22.1 24.5 26.9 29.5 31.9 34.4 1.0 1.0 1.0 1.0 1.0 1.0 1.0 33.3 36.7 40.0 44.4 47.8 50.0 36.8 40.6 44.2 49.1 52.8 55.3 48 51 54 58 60 64 70 53.3 56.7 60.0 64.4 66.7 71.1 77.8 SMAJ75(C)A SMAJ78(C)A SMAJ85(C)A SMAJ90(C)A SMAJ100(C)A SMAJ110(C)A 75 78 85 90 100 110 SMAJ120(C)A SMAJ130(C)A SMAJ150(C)A SMAJ160(C)A SMAJ170(C)A SMAJ200(C)A 120 130 150 160 170 200 SMAJ5.0(C)A SMAJ6.0(C)A Reverse Standoff Voltage VRWM (V) 5.0 6.0 SMAJ6.5(C)A SMAJ7.0(C)A SMAJ7.5(C)A SMAJ8.0(C)A SMAJ8.5(C)A SMAJ9.0(C)A SMAJ10(C)A 6.5 7.0 7.5 8.0 8.5 9.0 10 7.22 7.78 8.33 8.89 9.44 10.0 11.1 7.98 8.60 9.21 9.83 10.4 11.1 12.3 10 10 1.0 1.0 1.0 1.0 1.0 SMAJ11(C)A SMAJ12(C)A SMAJ13(C)A SMAJ14(C)A SMAJ15(C)A SMAJ16(C)A 11 12 13 14 15 16 12.2 13.3 14.4 15.6 16.7 17.8 13.5 14.7 15.9 17.2 18.5 19.7 SMAJ17(C)A SMAJ18(C)A SMAJ20(C)A SMAJ22(C)A SMAJ24(C)A SMAJ26(C)A SMAJ28(C)A 17 18 20 22 24 26 28 18.9 20.0 22.2 24.4 26.7 28.9 31.1 SMAJ30(C)A SMAJ33(C)A SMAJ36(C)A SMAJ40(C)A SMAJ43(C)A SMAJ45(C)A 30 33 36 40 43 45 SMAJ48(C)A SMAJ51(C)A SMAJ54(C)A SMAJ58(C)A SMAJ60(C)A SMAJ64(C)A SMAJ70(C)A Part Number Add C For Bidirectional (Note 7) Notes: Max. Clamping Voltage @ Ipp Marking Code BITE TG UNIHE HG 35.7 33.3 31.0 29.4 27.7 26.0 23.5 TK TM TP TR TT TV TX HK HM HP HR HT HV HX 18.2 19.9 21.5 23.2 24.4 26.0 22.0 20.1 18.6 17.2 16.4 15.3 TZ UE UG UK UM UP HZ IE IG IK IM IP 5.0 5.0 5.0 5.0 5.0 5.0 5.0 27.6 29.2 32.4 35.5 38.9 42.1 45.4 14.5 13.7 12.3 11.2 10.3 9.5 8.8 UR UT UV UX UZ VE VG IR IT IV IX IZ JE JG 1.0 1.0 1.0 1.0 1.0 1.0 5.0 5.0 5.0 5.0 5.0 5.0 48.4 53.3 58.1 64.5 69.4 72.7 8.3 7.5 6.9 6.2 5.7 5.5 VK VM VP VR VT VV JK JM JP JR JT JV 58.9 62.7 66.3 71.2 73.7 78.6 86.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 77.4 82.4 87.1 93.6 96.8 103 113 5.2 4.9 4.6 4.3 4.1 3.9 3.5 VX VZ WE WG WK WM WP JX JZ RE RG RK RM RP 83.3 86.7 94.4 100 111 122 92.1 95.8 104 111 123 135 1.0 1.0 1.0 1.0 1.0 1.0 5.0 5.0 5.0 5.0 5.0 5.0 121 126 137 146 162 177 3.3 2.2 2.9 2.7 2.5 2.3 WR WT WV WX WZ XE RR RT RV RX RZ SE 133 144 167 178 189 224 147 159 185 197 209 248 1.0 1.0 1.0 1.0 1.0 1.0 5.0 5.0 5.0 5.0 5.0 1.0 193 209 243 259 275 324 2.0 1.9 1.6 1.5 1.4 1.2 XG XK XM XP XR YT SG SK SM SP SR ST 7. Suffix C denotes Bi-directional device. 8. VBR measured with IT current pulse = 300s 9. For Bidirectional devices having VRWM of 10V and under, the IR is doubled. SMAJ5.0(C)A - SMAJ200(C)A Document number: DS19005 Rev. 16 - 2 2 of 5 www.diodes.com January 2012 (c) Diodes Incorporated SMAJ5.0(C)A - SMAJ200(C)A 10,000 CT, TOTAL CAPACITANCE (pF) PEAK PULSE DERATING IN % OF PEAK POWER OR CURRENT 100 75 TJ = 25C Unidirectional 1,000 50 25 Bidirectional 100 10 X 1000 Waveform as defined by REA 10 0 0 50 25 75 100 125 150 Measured at f = 1MHz 1.0Vrms signal Bias = 0Vdc 1 175 200 10 100 VWM, STANDOFF VOLTAGE (V) Fig. 2 Typical Total Capacitance TA, AMBIENT TEMPERATURE (C) Fig. 1 Pulse Derating Curve 1,000 100 IP, PEAK PULSE CURRENT (%Ipp) PPK, PEAK PULSE POWER (kW) T j = 25 C Non repetitive pulse waveform shown in Fig. 4 10 1.0 0.1 0.1 1.0 10 100 1,000 10,000 60 50 40 30 20 10 0 1 20 5 10 50 100 NUMBER OF CYCLES AT 60Hz Fig. 5 Maximum Non-Repetitive Surge Current 2 SMAJ5.0(C)A - SMAJ200(C)A Document number: DS19005 Rev. 16 - 2 PM(AV), STEADY STATE POWER DISSIPATION (W) IFSM, PEAK FORWARD SURGE CURRENT (A) t, TIME (ms) Fig. 4 Pulse Waveform 3 of 5 www.diodes.com 1.0 0.8 0.6 0.4 0.2 0.0 0 25 50 75 100 125 150 175 200 TL, LEAD TEMPERATURE (C) Fig. 6 Steady State Power Derating Curve January 2012 (c) Diodes Incorporated SMAJ5.0(C)A - SMAJ200(C)A Package Outline Dimensions B A C D J H G E SMA Dim Min Max A 2.29 2.92 B 4.00 4.60 C 1.27 1.63 D 0.15 0.31 E 4.80 5.59 G 0.05 0.20 H 0.76 1.52 J 2.01 2.30 All Dimensions in mm Suggested Pad Layout SMA Value (in mm) Dimensions Z 6.5 G 1.5 X 1.7 Y 2.5 C 4.0 SMAJ5.0(C)A - SMAJ200(C)A Document number: DS19005 Rev. 16 - 2 4 of 5 www.diodes.com January 2012 (c) Diodes Incorporated SMAJ5.0(C)A - SMAJ200(C)A IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright (c) 2012, Diodes Incorporated www.diodes.com SMAJ5.0(C)A - SMAJ200(C)A Document number: DS19005 Rev. 16 - 2 5 of 5 www.diodes.com January 2012 (c) Diodes Incorporated