BL GALAXY ELECTRICAL TRANSIENT VOLTAGE SUPPRESSOR SMAJ5.0 - - - SMAJ188CA BREAKDOWN VOLTAGE: 5.0 --- 188 V PEAK PULSE POWER: 400 W FEATURES Plastic package has underwriters laboratory flammability classification 94V-0 Optimized for LAN protection applications Low profile package with built-in strain relief for surface mounted applications Glass passivated junction Low incremental surge resistance, excellent clamping capability 400W peak pulse power capability with a 10/1000s waveform, repetition rate (duty cycle): 0.01% (300W above 78V) Very fast response time High temperature soldering guaranteed: 250C/10 seconds at terminals DO-214AC(SMA) MECHANICAL DATA Case:JEDEC DO-214AC molded plastic over passivated chip Terminals: solder plated, solderable per MIL-STD-750, method 2026 Polarity: foruni-directional types the color band denotes the cathode, which is postitive with respect to the anode under normal TVS operation Mounting position: any Weight: 0.002 ounces, 0.064 grams Devices for Bidirectional Applications For bi-directional devices, use suffix C or CA (e.g. SMAJ10C, SMAJ10CA). Electrical characteristics apply in both directions. MAXIMUM RATINGS AND CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified. SYMBOL VALUE UNIT Peak pow er dissipation w ith a 10/1000s w aveform (NOTE 1,2, FIG.1) PPPM Minimum 400 W Peak pulse current w ith a 10/1000s w aveform (NOTE 1) IPPM See next table A Typical thermal resistance, junction to ambient (NOTE 3) RJA 120.0 /W IFSM 40.0 A RJL 30 TJ, TSTG -55---+150 Peak forw ard surge current, 8.3ms single half sine-w ave ffff uni-directional only (NOTE 2) Typical thermal resistance, junction to ambient (NOTE 3) Operating junction and storage temperature range NOTES: (1) Non-repetitive current pules, per Fig. 3 and derated above TA=25 per Fig. 2. Rating is 300W above 78V. (2) Mounted on 0.2 x 0.2" (5.0 x 5.0mm) copper pads to each terminal. (3) Mounted on minimum recommended pad layout. Document Number 0285005 BLGALAXY ELECTRICAL /W www.galaxycn.com 1. ELECTRICAL CHARACTERISTICS Device ty pe R atings at 25 Breakdow n v oltage V (B R) at IT(1) (V ) Device marking code am bient tem perature unles s otherwis e spec if ied.V F =3.5V at I F =25A (uni-directional only ) Test current IT(m A ) Stand-of f v oltage V W M (V ) Max imum reverse leakage at V W M ID ( A ) (3) Max imum peak puls s surge current I P P M (A ) (2) Max imum clamping v oltage at I P P M V c (V ) Uni Bi Min Max SMA J5.0 AD WD 6.40 7.81 10 5.0 800 41.7 9.6 SMA J5.0A (5) AE WE 6.40 7.08 10 5.0 800 43.5 9.2 SMA J6.0 AF WF 6.67 8.15 10 6.0 800 35.1 11.4 SMA J6.0A AG WG 6.67 7.37 10 6.0 800 38.8 10.3 SMA J6.5 AH WH 7.22 8.82 10 6.5 500 32.5 12.3 SMA J6.5A AK WK 7.22 7.98 10 6.5 500 35.7 11.2 SMA J7.0 AL WL 7.78 9.51 10 7.0 200 30.1 13.3 SMA J7.0A AM WM 7.78 8.60 10 7.0 200 33.3 12.0 SMA J7.5 AN WN 8.33 10.3 1.0 7.5 100 28.0 14.3 SMA J7.5A AP WP 8.33 9.21 1.0 7.5 100 31.0 12.9 SMA J8.0 AQ WQ 8.89 10.9 1.0 8.0 50 26.7 15.0 SMA J8.0A AR WR 8.89 9.83 1.0 8.0 50 29.4 13.6 SMA J8.5 AS WS 9.44 11.5 1.0 8.5 10 25.2 15.9 SMA J8.5A AT WT 9.44 10.4 1.0 8.5 10 27.8 14.4 SMA J9.0 AU WU 10.0 12.2 1.0 9.0 5.0 23.7 16.9 SMA J9.0A AV WV 10.0 11.1 1.0 9.0 5.0 26.0 15.4 SMA J10 AW WW 11.1 13.6 1.0 10 5.0 21.3 18.8 SMA J10A AX WX 11.1 12.3 1.0 10 5.0 23.5 17.0 SMA J11 AY WY 12.2 14.9 1.0 11 5.0 19.9 20.1 SMA J11A AZ WZ 12.2 13.5 1.0 11 5.0 22.0 18.2 SMA J12 BD XD 13.3 16.3 1.0 12 5.0 18.2 22.0 SMA J12A BE XE 13.3 14.7 1.0 12 5.0 20.1 19.9 SMA J13 BF XF 14.4 17.6 1.0 13 5.0 16.8 23.8 SMA J13A BG XG 14.4 15.9 1.0 13 5.0 18.6 21.5 SMA J14 BH XH 15.6 19.1 1.0 14 5.0 15.5 25.8 SMA J14A BK XK 15.6 17.2 1.0 14 5.0 17.2 23.2 SMA J15 BL XL 16.7 20.4 1.0 15 5.0 14.9 26.9 SMA J15A BM XM 16.7 18.5 1.0 15 5.0 16.4 24.4 SMA J16 BN XN 17.8 21.8 1.0 16 5.0 13.9 28.8 SMA J16A BP XP 17.8 19.7 1.0 16 5.0 15.4 26.0 SMA J17 BQ XQ 18.9 23.1 1.0 17 5.0 13.1 30.5 SMA J17A BR XR 18.9 20.9 1.0 17 5.0 14.5 27.6 SMA J18 BS XS 20.0 24.4 1.0 18 5.0 12.4 32.2 SMA J18A BT XT 20.0 22.1 1.0 18 5.0 13.7 29.2 SMA J20 BU XU 22.2 27.1 1.0 20 5.0 11.2 35.8 SMA J20A BV XV 22.2 24.5 1.0 20 5.0 12.3 32.4 SMA J22 BW XW 24.4 29.8 1.0 22 5.0 10.2 39.4 SMA J22A BX XX 24.4 26.9 1.0 22 5.0 11.3 35.5 SMA J24 BY XY 26.7 32.6 1.0 24 5.0 9.3 43.0 SMA J24A BZ XZ 26.7 29.5 1.0 24 5.0 10.3 38.9 SMA J26 CD YD 28.9 35.3 1.0 26 5.0 8.6 46.6 SMA J26A CE YE 28.9 31.9 1.0 26 5.0 9.5 42.1 SMA J28 CF YF 31.1 38.0 1.0 28 5.0 8.0 50.0 SMA J28A CG YG 31.1 34.4 1.0 28 5.0 8.8 45.4 SMA J30 CH YH 33.3 40.7 1.0 30 5.0 7.5 53.5 5.0 8.3 48.4 36.8 1.0 30 SMA J30A CK YK 33.3 Notes : (1) Pulse test :tP 50ms (2) Surge c urrent w avef orm per Fig.3 and derate per Fig.2 (3) For bi-direc tional types hav ing V W M of 10 V olts and less ,the ID Iimit is doubled (4) A ll terms and sy mbols are c onsistent w ith A NSI/IEEE C62.35 (5) For the bidirectional SMA J5.0CA ,the maximum V (B R) is 7.25V Document Number 0285005 BLGALAXY ELECTRICAL www.galaxycn.com 2. ELECTRICAL CHARACTERISTICS Dev ic e type SMA J33 R atings at 25 Breakdow n v oltage V (B R) at IT(1) (V ) Dev ic e marking code am bient tem perature unles s ot herwis e s pec if ied.V F =3.5V at I F =25A (uni-directional only ) Test current IT(m A ) Stand-of f v oltage V W M (V ) Max imum rev ers e leakage at V W M ID ( A ) (3) Max imum peak puls s surge current I P P M (A ) (2) Max imum clamping v oltage at I P P M V c (V ) Uni Bi Min Max CL YL 36.7 44.9 1.0 33 5.0 5.1 59.0 SMA J33A CM YM 36.7 40.6 1.0 33 5.0 5.6 53.3 SMA J36 CN YN 40.0 48.9 1.0 36 5.0 4.7 64.3 SMA J36A CP YP 40.0 44.2 1.0 36 5.0 5.2 58.1 SMA J40 CQ YQ 44.4 54.3 1.0 40 5.0 4.2 71.4 SMA J40A CR YR 44.4 49.1 1.0 40 5.0 4.7 64.5 SMA J43 CS YS 47.8 58.4 1.0 43 5.0 3.9 76.7 SMA J43A CT YT 47.8 52.8 1.0 43 5.0 4.3 69.4 SMA J45 CU YU 50.0 61.1 1.0 45 5.0 3.7 80.3 SMA J45A CV YV 50.0 55.3 1.0 45 5.0 4.1 72.7 SMA J48 CW YW 53.3 65.1 1.0 48 5.0 3.5 85.5 SMA J48A CX YX 53.3 58.9 1.0 48 5.0 3.9 77.4 SMA J51 CY YY 56.7 69.3 1.0 51 5.0 3.3 91.1 SMA J51A CZ YZ 56.7 62.7 1.0 51 5.0 3.6 82.4 SMA J54 RD ZD 60.0 73.3 1.0 54 5.0 3.1 96.3 SMA J54A RE ZE 60.0 66.3 1.0 54 5.0 3.4 87.1 SMA J58 RF ZF 64.4 78.7 1.0 58 5.0 2.9 103 SMA J58A RG ZG 64.4 71.2 1.0 58 5.0 3.2 93.6 SMA J60 RH ZH 66.7 81.5 1.0 60 5.0 2.8 107 SMA J60A RK ZK 66.7 73.7 1.0 60 5.0 3.1 96.8 SMA J64 RL ZL 71.1 86.9 1.0 64 5.0 2.6 114 SMA J64A RM ZM 71.1 78.6 1.0 64 5.0 2.9 103 SMA J70 RN ZN 77.8 95.1 1.0 70 5.0 2.4 125 SMA J70A RP ZP 77.8 86.0 1.0 70 5.0 2.7 113 SMA J75 RQ ZQ 83.3 102 1.0 75 5.0 2.2 134 SMA J75A RR ZR 83.3 92.1 1.0 75 5.0 2.5 121 SMA J78 RS ZS 86.7 106 1.0 78 5.0 2.2 139 SMA J78A RT ZT 86.7 95.8 1.0 78 5.0 2.4 126 SMA J85 RU ZU 94.4 115 1.0 85 5.0 2.0 151 SMA J85A RV ZV 94.4 104 1.0 85 5.0 2.2 137 SMA J90 RW ZW 100 122 1.0 90 5.0 1.9 160 SMA J90A RX ZX 100 111 1.0 90 5.0 2.1 146 SMA J100 RY ZY 111 136 1.0 100 5.0 1.7 179 SMA J100A RZ ZZ 111 123 1.0 100 5.0 1.9 162 SMA J110 SD VD 122 149 1.0 110 5.0 1.5 196 SMA J110A SE VE 122 135 1.0 110 5.0 1.7 177 SMA J120 SF VF 133 163 1.0 120 5.0 1.4 214 SMA J120A SG VG 133 147 1.0 120 5.0 1.6 193 SMA J130 SH VH 144 176 1.0 130 5.0 1.3 231 SMA J130A SK VK 144 159 1.0 130 5.0 1.4 209 SMA J150 SL VL 167 204 1.0 150 5.0 1.1 268 SMA J150A SM VM 167 185 1.0 150 5.0 1.2 243 SMA J160 SN VN 178 218 1.0 160 5.0 1.0 287 SMA J160A SP VP 178 197 1.0 160 5.0 1.2 259 SMA J170 SQ VQ 189 231 1.0 170 5.0 0.99 304 SMA J170A SR VR 189 209 1.0 170 5.0 1.09 275 SMA J188 ST VT 209 255 1.0 188 5.0 0.9 344 5.0 0.91 328 231 1.0 188 SMA J188A SS VS 209 Notes: (1) Puls e test :tP 50ms (2) Surge current w avef orm per Fig.3 and derate per Fig.2 (3) For bi-direc tional types having V W M of 10 V olts and less ,the ID Iimit is doubled (4) A ll terms and symbols are consistent w ith A NSI/IEEE C62.35 Document Number 0285005 BLGALAXY ELECTRICAL www.galaxycn.com 3. RATINGS AND CHARACTERISTIC CURVES SMAJ5.0 - - -SMAJ188CA NON-REPETITIVE PULSE WAVEFORM SHOWN if FIG.3 TA=25 10 1.0 0.1 0.1s 10s 1.0s 100s 1ms 10ms (I PPM) 100 DERATING IN PERCENTAGE, % FIG.2 -- PULSE DERATING CURVE PEAK PULSE POWER PP (P ) OR CURRENT PPPM, PEAK PULSE POWER, KW FIG.1 -- PEAK PULSE POWER RATING CURVE 100 75 50 25 0 0 td, PULSE WIDTH, SEC. 100 10,000 tr=10 sec PEAK VALUE I PPM 100 CJ, JUNCTION CAPACITANCE, pF IPPM , PEAK PULSE CURRENT, % 75 PULES WIDTH (td) is DEFINDE as the POINT WHERE the PEAK CURRENT DECAYS to 50% of I PPM HALF VALUE - I PP 2 10/1000 s WAVEFORM as DEFINED by R.E.A. 50 td 0 0 1.0 3.0 2.0 4.0 175 200 Uni-Directional 100 10 Bi-Directional 1.0 10 100 200 V(BR), BREAKDOWN VOLTAGE, V /W ) 100 ( 10 1 10 TL, LEAD TEMPERATURE, 100 1000 FIG.6 -- MAXIMUM NON-REPETITIVE FORWARD HHHH SURGE H CURRENT UNIDIRECTIONAL ONLY 50 TJ=TJ max. 8.3ms SINGLEHALFSINE-MAVE (JEDECMETHOD) 40 AMPERES 1000 IFSM, PEAK FORWARD SURGE CURRENT, FIG.5 -- TYPICAL TRANSIENT THERMAL IMPEDANCE 0.1 150 TJ =25 f=1.0MHZ Vsig=50mVp-p MEASURED at STAND-OFF VOLTAGE, VWM 1,000 t, TIME, ms 0.01 125 FIG.4 -- TYPICAL JUNCTION CAPACITANCE H HHHHHHH UNIDIRECTIONAL 150 TRANSLENT THERMAL IMPEDANCE 50 TA, AMBIENT TEMPERATURE. FIG.3 -- PULSE WAVEFORM 1 0.001 25 30 10 0 1 10 100 NUMBER OF CYCLES AT 60 Hz www.galaxycn.com Document Number 0285005 BLGALAXY ELECTRICAL 4.