W92-X112-5 - TE Connectivity / P&B - Datasheet.Technology

General Purpose Relays

Industrial Relays

W6/W9 Series Magnetic Hydraulic P&B Circuit Breakers

12-2014, Rev. 1214

www.te.com

a TE Connectivity Ltd. company

Datasheets and product speciﬁcation

according to IEC 61810-1 and to be used

only together with the ‘Deﬁnitions’ section.

Datasheets and product data is subject to the

terms of the disclaimer and all chapters of

the ‘Deﬁnitions’ section, available at

http://relays.te.com/definitions

Datasheets, product data, ‘Deﬁnitions’ sec-

tion, application notes and all speciﬁcations

are subject to change.

Potter & Brumﬁeld

n Designed for the international market. UL Recognzied (UL1077 and

UL1500), CSA Accepted and VDE approved.

n Ratings to 50 amps.

n Heavy duty #10-32 stud connections. (W9)

n Quick-connect or screw terminals. (W6)

n Several delay curve options.

n Choice of toggle or rocker actuator per pole or per unit (W6).

n Trip-free operation.

Agency Approvals

UL: Recognized as Supplementary Protector under UL 1077. Available

models meet Ignition Protection requirements in accordance with

UL1500. File E69543

CSA: Accepted as a Supplementary Protector. File LR15734.

VDE: Approved to VDE 0642/EN 60 934 (Circuit Breakers for Equipment)

License No. 73782

Users should thoroughly review the technical data before selecting a product part number.

It is recommended that users also seek out the pertinent approvals ﬁles of the agencies/

laboratories and review them to conﬁrm the product meets the requirements for a given

application.

Electrical Data

Calibration:

Breakers will hold 100% of rated current.

Breakers may trip between 101% and 124% of rated load (134% for AC/

DC units).

Breakers must trip at 125% of rated load and above (135% for AC/DC

units).

Dielectric Strength: 50/60 Hz., 1500V: DC, 1100V

Insulation Resistance: 100 Megaohms at 500VDC

Endurance:

10,000 on/off cycles - 6000 at rated load, 4000 at no load.

Units tested at six cycles per minute, 1 second on and 9 seconds off at

25°C ambient.

Typical Resistance and Impedance

Current DC 50/60

(Amps.) Resistance Impedance

(Ohms) (Ohms)

0.2 90 90

1.0 1.2 1.2

2.0 0.28 0.28

5.0 0.04 0.04

10.0 0.013 0.013

20.0 0.004 0.005

30.0 0.0027 0.004

40.0 0.002 0.002

50.0 0.0015 0.0015

Tolerance: 0.1 - 4.99 ± 15%; 5 - 9.99 ± 20%; 10 - 15 ± 25%; 16 - 30 ± 50%.

Mechanical/Environmental Data

Operating Temperature: -40°C to +85°C.

Humidity: Meets requirements of Mil-STD-202 method 103.

Shock: Tested per Mil-STD-202, method 213, test condition C

(100g @ 6 ms)

Vibration: Tested per Mil-STD-202, method 201, 10-55 Hz., 0.06”

(1.52mm) total excursion in 2 planes.

Mechanical/Environmental Data (continued)

Fungus and Moisture Resistance:

Special moisture resistant ﬁnish applied to all ferrous parts.

Plastic parts are made of inherently fungus resistant material.

Marking:

International “1” and “0” symbols are marked on the toggle for both W6 and

W9. W9 units have “ON” and “OFF” molded into the area at the base of the

toggle. On a special order basis, graphics can be imprinted on the rockers

of rocker actuated W6 units. VDE approved versions of rocker actuated W6

breakers have their rockers imprinted with “1” and “0”.

Mounting:

Units are mounted with two #6-32 screws from the front of the panel.

Metric models for use with M3 x 0.5 screws are available. To maintain

published performance speciﬁcations, units should not be mounted more

than 90° from their normal upright position.

Weight: Approximately 2.5 ounces per pole.

Approvals and Ratings Table 1

Maximum

Voltage

Frequency

(Hz) Phase

Current

Rating

(Amps)

Interrupting

Capacity

(Amps)

65 DC - 0.2 - 50 2,000

277 50/60 1 0.2 - 20 5,000

277 50/60 1 21 - 50 2,500

277/480 50/60 3Ø-Wye 0.2 - 20 5,000

W6 Series UL1077/CSA (All Circuit Functions)

Maximum

Voltage

Frequency

(Hz) Phase

Current

Rating

(Amps)

Interrupting

Capacity

(Amps)

65 DC - 0.2 - 50 2,000

277 50/60 1 0.2 - 50 5,000

277/480 50/60 3Ø-Wye 0.2 - 20 5,000

W9 Series UL1077/CSA (All Circuit Functions)

Maximum

Voltage

Frequency

(Hz) Phase

Current

Rating

(Amps)

Interrupting

Capacity

(Amps)

65 DC - 0.2 - 50 2,000

250 50/60 1 0.2 - 30 5,000

250 50/60 1 31 - 50 2,000

415/240 50/60 3Ø 0.2 - 30 5,000

W6 or W9 Series VDE (Circuit Function X)

Maximum

Voltage

Frequency

(Hz) Phase

Current

Rating

(Amps)

Interrupting

Capacity

(Amps)

48 DC - 0.2 - 50 3,000

125/250 50/60 1 0.2 - 50 1,000

250 50/60 3Ø-Wye 0.2 - 50 1,000

W6 or W9 Series UL1500 (Circuit Function X)

General Purpose Relays

Industrial Relays

W6/W9 Series Magnetic Hydraulic P&B Circuit Breakers (Continued)

12-2014, Rev. 1214

www.te.com

a TE Connectivity Ltd. company

Datasheets and product speciﬁcation

according to IEC 61810-1 and to be used

only together with the ‘Deﬁnitions’ section.

Datasheets and product data is subject to the

terms of the disclaimer and all chapters of

the ‘Deﬁnitions’ section, available at

http://relays.te.com/definitions

Datasheets, product data, ‘Deﬁnitions’ sec-

tion, application notes and all speciﬁcations

are subject to change.

Potter & Brumﬁeld

100 200 300 400 500 600 700 800 900 1000 11 00 12 00

LOAD CURRENT AS A PERCENT

OF BREAKER RATING

125 150

10,000

1000

100

.01

.001

TIME IN SECONDS

CURVE 0 INSTANTANEOUS

OVERLOAD @ 50/60 Hz. & DC @ 400 Hz.

125% 100 ms max. May Tr ip

150% 55 ms max. 100 ms max.

200% 30 ms max. 30 ms max.

400% 15 ms max. 15 ms max.

600% 12 ms max. 12 ms max.

800% 12 ms max. 12 ms max.

TRIP TIMES

400 Hz.

DC & 50/60 Hz.

100 200 300 400 500 600 700 800 900 1000 11 00 12 00

LOAD CURRENT AS A PERCENT

OF BREAKER RATING

125 150

10,000

1000

100

.01

.001

TIME IN SECONDS

CURVE 2 STANDARD DELAY 50/60 Hz.

OVERLOAD TRIP TIMES

(SEC.)

125% 10 - 150

200% 2.2 - 20

400% .2 - 2

600% .03 - .75

800% .007 - .15

1000% .005 - .04

100 200 300 400 500 600 700 800 900 1000 11 00 12 00

LOAD CURRENT AS A PERCENT

OF BREAKER RATING

125 150

10,000

1000

100

.01

.001

TIME IN SECONDS

CURVE 3 SHORT DELAY 50/60 Hz.

OVERLOAD TRIP TIMES

(SEC.)

125% 1 - 15

200% .15 - 1. 5

400% .03 - .25

600% .007 - .15

800% .003 - .08

1000% .003 - .04

100 200 300 400 500 600 700 800 900 1000 11 00 12 00

LOAD CURRENT AS A PERCENT

OF BREAKER RATING

125 150

10,000

1000

100

.01

.001

TIME IN SECONDS

MOTOR START / LONG DELAY

CURVE 10 HIGH INRUSH 50/60 Hz. AC

OVERLOAD TRIP TIMES

(SEC.)

125% 40 - 500

200% 9 - 100

400% 2 - 20

600% .8 - 10

800% .1 - 4.5

1000% .009 - 2

100 200 300 400 500 600 700 800 900 1000 11 00 12 00

LOAD CURRENT AS A PERCENT

OF BREAKER RATING

125 150

10,000

1000

100

.01

.001

TIME IN SECONDS

CURVE 12 HIGH INRUSH 50/60 Hz.

125% 10 - 150

200% 3 - 25

400% .5 - 2.5

600% .15 - 1

800% .015 - .7

1000% .009 - .35

OVERLOAD TRIP TIMES

(SEC.)

100 200 300 400 500 600 700 800 900 1000 11 00 12 00

LOAD CURRENT AS A PERCENT

OF BREAKER RATING

125 150

10,000

1000

100

.01

.001

TIME IN SECONDS

CURVE 13 HIGH INRUSH 50/60 Hz.

OVERLOAD TRIP TIMES

(SEC.)

125% .8 - 30

200% .15 - 2.5

400% .03 - .3

600% .02 - .15

800% .009 - .12

1000% .009 - .09

100 200 300 400 500 600 700 800 900 1000 11 00 12 00

LOAD CURRENT AS A PERCENT

OF BREAKER RATING

125 150

10,000

1000

100

.01

.001

TIME IN SECONDS

CURVE 2 STANDARD DELAY DC

OVERLOAD TRIP TIMES

(SEC.)

125% 2 - 55

200% .60 - 8

400% .1 - 1. 5

600% .02 - .5

800% .004 - .05

1000% .004 - .025

100 200 300 400 500 600 700 800 900 1000 11 00 12 00

LOAD CURRENT AS A PERCENT

OF BREAKER RATING

125 150

10,000

1000

100

.01

.001

TIME IN SECONDS

CURVE 3 SHORT DELAY DC

OVERLOAD TRIP TIMES

(SEC.)

125% .6 - 7

200% .16 - 1. 5

400% .03 - .25

600% .01 - .13

800% .004 - .05

1000% .003 - .015

100 200 300 400 500 600 700 800 900 1000 11 00 12 00

LOAD CURRENT AS A PERCENT

OF BREAKER RATING

125 150

10,000

1000

100

.01

.001

TIME IN SECONDS

CURVE 53 DC HIGH INRUSH

OVERLOAD TRIP TIMES

(SEC.)

125% 80 - 700

200% 15 - 150

400% 2 - 20

600% .70 - 10

800% .10 - 3

1000% .01 - .1

100 200 300 400 500 600 700 800 900 1000 11 00 12 00

LOAD CURRENT AS A PERCENT

OF BREAKER RATING

125 150

10,000

1000

100

.01

.001

TIME IN SECONDS

CURVE 34 DC, 50/60 Hz. STANDARD DELAY

OVERLOAD TRIP TIMES

(SEC.)

135% 1 - 90

200% .60 - 20

400% .095 - 2

600% .02 - .95

800% .002 - .45

1000% .002 - .09

135

AC 50/60 Hz.

AC/DC

Note:

For instantaneous curves for all voltages refer to Curve 0 instananeous under the AC 50/60 Hz. heading

Time vs Current Trip Curves For W6 Series and W9 Series

General Purpose Relays

Industrial Relays

W6/W9 Series Magnetic Hydraulic P&B Circuit Breakers (Continued)

12-2014, Rev. 1214

www.te.com

a TE Connectivity Ltd. company

Datasheets and product speciﬁcation

according to IEC 61810-1 and to be used

only together with the ‘Deﬁnitions’ section.

Datasheets and product data is subject to the

terms of the disclaimer and all chapters of

the ‘Deﬁnitions’ section, available at

http://relays.te.com/definitions

Datasheets, product data, ‘Deﬁnitions’ sec-

tion, application notes and all speciﬁcations

are subject to change.

Potter & BrumﬁeldPotter & Brumﬁeld

Product code structure Typical product code W 67- X 2 Q 1 2- 20

W6 Series

Circuit Breaker Mounting

W #6-32 mounting threads

M M3.0 x 0.5 mounting threads

Number of Poles

67 Single Pole

68 Two Pole

69 Three Pole

70 Four Pole

Circuit Function (Only X is VDE approved)

X Series trip

Actuator

One actuator per pole

1 Black toggle 3 Black rocker 5 Red rocker 9 Red toggle

2 White toggle 4 White rocker 6 Grey rocker

One actuator per unit

7 Black toggle 8 White toggle J Black rocker

Termination

Q .250“ QC (DIN 46 244) [30A Max. UL/CSA; 25A Max. VDE]

S #8-32 screw [30A Max.]

T #10-32 screw [50A Max.]

U #8-32 screw, nickel plated, bent inward 30° [30A Max.]

V #10-32 screw, nickel plated, bent inward 30° [30A Max.]

Notes:

#10-32 termination must be used for all ratings of greater than 30 amps.

#10-32 termination must be speciﬁed for circuit function D, but relay trip pole will be equipped

with .250“ QC.

Maximum Line Voltage (see Table 1 for current ranges)

UL/CSA 1 277VAC, 50/60 Hz.

Types 2 277/480VAC, 50/60 Hz. [20A Max.] (Requires insulating barriers,

see outline dimension drawing)

5 65VDC

7 AC/DC 277VAC, 50/60 Hz. or 65VDC

(Time delay curve 34 must be speciﬁed)

8 AC/DC 120VAC, 120/240VAC, 48VDC

(Agency Approval M [UL1500] and time delay curve 34 must be speciﬁed)

VDE 1 250VAC, 415/240VAC

Types 5 65VDC

7 AC/DC 250VAC, 415/240VAC, 65VDC

(Time delay curve 34 must be speciﬁed)

Time Delay Curve

0 Instantaneous 10 AC high inrush motor start / long delay

2 Standard delay 12 AC high inrush version of #2

3 Short delay 13 AC high inrush version of #3

53 DC high inrush 34 Combination AC/DC standard delay

Amp Rating

0.2 0.50 1.0 2.0 3.0 4.0 6.0 7.5 9.0 11.0 15.0 25.0 35.0 45.0 Consult factory for

0.25 0.75 1.5 2.5 3.5 5.0 7.0 8.0 10.0 12.0 20.0 30.0 40.0 50.0 other values

Agency Approval

Blank UL1077/CSA breaker

V VDE approved breaker

M UL1077/UL1500 ignition protected breaker

Authorized distributors are more likely to stock the following items.

W67-X2Q10-3 W67-X2Q12-10 W67-X2Q13-3 W67-X2Q50-5 W67-X2Q52-30 W68-X2Q12-10 W68-X2Q110-10 W69-X2Q12-25

W67-X2Q10-5 W67-X2Q12-15 W67-X2Q13-10 W67-X2Q50-10 W67-X2Q110-15 W68-X2Q12-15 W68-X2Q110-20 W69-X2Q12-30

W67-X2Q12-2 W67-X2Q12-20 W67-X2Q13-15 W67-X2Q52-5 W67-X2Q110-20 W68-X2Q12-20 W69-X2Q12-5 W69-X2Q110-20

W67-X2Q12-3 W67-X2Q12-30 W67-X2Q13-20 W67-X2Q52-10 W68-X2Q12-3 W68-X2Q12-25 W69-X2Q12-10 W69-X2Q110-30

W67-X2Q12-5 W67-X2Q13-1 W67-X2Q13-25 W67-X2Q52-15 W68-X2Q12-5 W68-X2Q12-30 W69-X2Q12-15

W67-X2Q12-7 W67-X2Q13-2 W67-X2Q13-30 W67-X2Q52-20 W68-X2Q12-7 W68-X2Q13-15 W69-X2Q12-20

General Purpose Relays

Industrial Relays

W6/W9 Series Magnetic Hydraulic P&B Circuit Breakers (Continued)

12-2014, Rev. 1214

www.te.com

a TE Connectivity Ltd. company

Datasheets and product speciﬁcation

according to IEC 61810-1 and to be used

only together with the ‘Deﬁnitions’ section.

Datasheets and product data is subject to the

terms of the disclaimer and all chapters of

the ‘Deﬁnitions’ section, available at

http://relays.te.com/definitions

Datasheets, product data, ‘Deﬁnitions’ sec-

tion, application notes and all speciﬁcations

are subject to change.

Potter & BrumﬁeldPotter & Brumﬁeld

Product code structure Typical product code W 91- X 1 1 2- 20

W9 Series

Circuit Breaker Mounting

W #6-32 mounting threads

M M3.0 x 0.5 mounting threads

Number of Poles

91 Single Pole

92 Two Pole

93 Three Pole

94 Four Pole

Circuit Function (Only X is VDE approved)

X Series trip

Actuator

One actuator per pole

1 Black toggle

2 White toggle

Maximum Line Voltage (see Table 1 for current ranges)

UL/CSA 1 277VAC, 50/60 Hz.

Types 2 277/480VAC, 50/60 Hz. [20A Max.]

5 65VDC

7 AC/DC 277VAC, 50/60 Hz. or 65VDC

(Time delay curve 34 must be speciﬁed)

8 AC/DC 120VAC, 120/240VAC, 48VDC

(Agency Approval M [UL1500] and time delay curve 34 must be speciﬁed)

VDE 1 250VAC, 415/240VAC

Types 5 65VDC

7 AC/DC 250VAC, 415/240VAC, 65VDC

(Time delay curve 34 must be speciﬁed)

Time Delay Curve

0 Instantaneous 10 AC high inrush motor start / long delay

2 Standard delay 12 AC high inrush version of #2

3 Short delay 13 AC high inrush version of #3

53 DC high inrush 34 Combination AC/DC standard delay

Amp Rating

0.20 0.75 2.0 3.5 6.0 8.0 11.0 20.0 35.0 50.0

0.25 1.00 2.5 4.0 7.0 9.0 12.0 25.0 40.0 Consult factory for other values

0.50 1.50 3.0 5.0 7.5 10.0 15.0 30.0 45.0

Agency Approval

Blank UL1077/CSA approved breaker

V VDE approved breaker

M UL1077/UL1500 ignition protected breaker

Authorized distributors are more likely to stock the following items.

W91-X112-1 W91-X112-15 W91-X113-15 W91-X152-40 W92-X112-5 W92-X112-30 W92-X1110-30 W93-X112-30

W91-X112-2 W91-X112-20 W91-X150-5 W91-X152-50 W92-X112-7 W92-X112-40 W93-X112-5 W93-X112-40

W91-X112-3 W91-X112-40 W91-X152-10 W91-X1110-20 W92-X112-10 W92-X112-50 W93-X112-10 W93-X112-50

W91-X112-5 W91-X112-50 W91-X152-15 W92-X112-1 W92-X112-15 W92-X113-15 W93-X112-15 W93-X1110-20

W91-X112-7 W91-X113-5 W91-X152-20 W92-X112-2 W92-X112-20 W92-X113-20 W93-X112-20 W93-X1110-30

W91-X112-10 W91-X113-10 W91-X152-30 W92-X112-3 W92-X112-25 W92-X1110-20 W93-X112-25

General Purpose Relays

Industrial Relays

W6/W9 Series Magnetic Hydraulic P&B Circuit Breakers (Continued)

12-2014, Rev. 1214

www.te.com

a TE Connectivity Ltd. company

Datasheets and product speciﬁcation

according to IEC 61810-1 and to be used

only together with the ‘Deﬁnitions’ section.

Datasheets and product data is subject to the

terms of the disclaimer and all chapters of

the ‘Deﬁnitions’ section, available at

http://relays.te.com/definitions

Datasheets, product data, ‘Deﬁnitions’ sec-

tion, application notes and all speciﬁcations

are subject to change.

Potter & Brumﬁeld

W6 Series

Outline Dimensions - Toggle Actuator Models

1.520

(38.61)

.235

(5.97)

2.043

(51.89) 1.640

(41.66) .245

(6.22)

.66

(16.8)

OFF

29°

30°

LINE

LOAD

Panel Mounting Cutout

.750

(19.05)

1.660

(42.16)

Ø .625 +.010

-.000

(15.88 +0.25)

-0.00

1 PER POLE

Ø .156

(3.96) [2 PLACES PER POLE]

1.048

(26.62)

W6 Series - One Actuator Per Pole

2.000

(50.80)

6.32 TH'D. .14 (3.56) DP. TYP.

M3 X 0.5 OPTIONAL

1.22

(31. 00)

1.05

(26.67)

1.660

(42.16)

.750

(19.05)

Ø .590

(15.00)

1 Pole

1.500

(38.10)

2 Pole

2.250

(57.15)

3 Pole

3.000

(76.20)

4 Pole

W6 Series - One Actuator Per Unit

2.000

(50.80)

6.32 TH'D. .14 (3.56) DP. TYP.

M3 X 0.5 OPTIONAL

1.22

(31. 00)

1.05

(26.67)

1.660

(42.16)

.750

(19.05)

Ø .590

(15.00)

1 Pole

1.500

(38.10)

2 Pole

2.250

(57.15)

3 Pole

3.000

(76.20)

4 Pole

Note: Multi-pole models furnished with seperate handle tie hardware

Note: 4-pole models furnished with sperate

handle tie hardware

Notes:

1. Terminal protrusion dimensions are referenced from back of mounting panel

2. Main terminals are male quick connect type .250 (6.35) wide x .031 (.79) thick x

.377 (9.58) long. Optional 8-32 x .250 (6.35) or 10-32 x .250 (6.35) screw type

3. Panel mounting cutout detail mtg. detail tol.: ± .005 (.13) unless noted. Add

additional cutouts to correspond to number of poles. Outline drawing tolerance ±

.015 (.35) unless noted

2.250

(57.15)

2.778

(70.56)

.269

(6.83)

.266

(6.76)

2.530

(64.26)

480V Model with Barriers

Note: 3-pole model shown

Termination Options

1.058

(26.97)

2.380

(60.45)

LINE

LOAD

LINE

LOAD

1.520

(38.61)

.235

(5.97) 2.032

(51.61)

LINE

LOAD

LINE

LOAD

.416

(10.56)

.827

(21.00)

General Purpose Relays

Industrial Relays

W6/W9 Series Magnetic Hydraulic P&B Circuit Breakers (Continued)

12-2014, Rev. 1214

www.te.com

a TE Connectivity Ltd. company

Datasheets and product speciﬁcation

according to IEC 61810-1 and to be used

only together with the ‘Deﬁnitions’ section.

Datasheets and product data is subject to the

terms of the disclaimer and all chapters of

the ‘Deﬁnitions’ section, available at

http://relays.te.com/definitions

Datasheets, product data, ‘Deﬁnitions’ sec-

tion, application notes and all speciﬁcations

are subject to change.

Potter & Brumﬁeld

W6 Series

Outline Dimensions - Optional Toggle Guards

Notes:

1. Outline drawing tolerance ± .015 (.38) unless noted.

Dimensions in brackets ( ) are in milimeters.

2. Mounting Detail Tol. ± .005 (.013) unless noted

.78

(19.8)

.20

(5.08)

.44

(11.18)

.2 x

R1.0

(25.4)

.17 REF.

(4.32)

6 x .16 DIA.

(4.06)

.75

(19.05)

.75

(19.05)

1.093

(27.76)

2.185 INSIDE

(55.50)

4 x .16 DIA.

(4.06)

.75

(19.05)

.313

(7.95)

.313

(7.95)

1.375 INSIDE

(34.92)

.625 INSIDE

(15.88)

.47

(11.94)

.625

(15.88)

2 x .16 DIA.

(4.06)

.17

(4.32)

1.66

(42.16)

2.00

(50.8)

2 x

.27 DIA.

(6.86)

.95

(24.1)

.53

(13.46)

.08

(2.03)

.03

(.76)

84-004

(for 1 Pole

Breaker)

84-005

(for 2 Pole

Breaker)

84-006

(for 3 Pole

Breaker)

84-004 toggle guard shown with

W67 series circuit breaker

mounted in a panel.

Optional toggle guards may be ordered seperately for use on W6 toggle actuator models.

These guards help to prevent accidental operation and allow the breaker to be locked in the “off” position.

Outline Dimensions - Rocker Actuator Models

W6 Series

LOAD

LINE

.240

(6.10)

1.520

(38.61)

2.435

(61.85)

1.769

(44.93)

.774

(19.65)

.392

(9.96) .180

(4.57)

1.30

(33.0)

1.660

(42.16)

.375

(9.53)

.750

(19.05)

.388

(9.86)

1.995

(50.68)

2.608

(66.24) TAPPED FOR #6-32

M3 X 0.5 OPTIONAL

3.000

(76.20)

2.250

(57.15)

1.500

(38.10 )

2 POLE

.375

(9.53) .750

(19.05) .750

(19.05)

.750

(19.05)

POLE

OFF

.750

(19.05)

.375

(9.53)

2.000

(50.80)

.388

(9.86)

2.600

(66.04)

TAPPED FOR #6-32

M3 X 0.5 OPTIONAL

1 Pole

(Shown with optional “ON”

and “OFF” graphics)

2, 3 & 4 Pole,

One Actuator Per Pole

1.500

(38.10)

.375

(9.53) .750

(19.05)

.388

(9.86)

TAPPED FOR #6-32

M3 X 0.5 OPTIONAL

2.250

(57.15)

.375

(9.53)

.750

(19.05) .750

(19.05)

3.000

(76.20)

.375

(9.53) .750

(19.05) .750

(19.05)

.750

(19.05)

1.660

(42.16)

1.660

(42.16)

2.000

(50.80)

2.600

(66.04)

2, 3 & 4 Pole, One Actuator Per Unit

.750

(19.05) .750

(19.05)

.750

(19.05)

.375

(9.53)

.205

(5.21)

1.250

(31.75)

1.660

(42.16)

Ø .156

(3.96)

TYP. 2

PER POLE

.750

(19.05) 1.500

(38.10)2.250

(57.15) 3.000

(76.20)

1 POLE

2 POLE

3 POLE

4 POLE

Panel Mounting Cutout

VDE Rocker Marking

General Purpose Relays

Industrial Relays

W6/W9 Series Magnetic Hydraulic P&B Circuit Breakers (Continued)

12-2014, Rev. 1214

www.te.com

a TE Connectivity Ltd. company

Datasheets and product speciﬁcation

according to IEC 61810-1 and to be used

only together with the ‘Deﬁnitions’ section.

Datasheets and product data is subject to the

terms of the disclaimer and all chapters of

the ‘Deﬁnitions’ section, available at

http://relays.te.com/definitions

Datasheets, product data, ‘Deﬁnitions’ sec-

tion, application notes and all speciﬁcations

are subject to change.

Potter & Brumﬁeld

Outline Dimensions

W9 Series

29°

30°

OFF

.74

(18.8)

2.10

(53.34)

1.940

(49.28)

.281

(7.14)

1.845

(46.86) .313

(7.95)

.14

(3.56)

2.50

(64.00)

LINE

LOAD

#10-32

STUD

TERMINATION

.375

(9.52) 1.15

(29.21)

.060

(1.52)

Series Trip Model

Note:

1. Top mounted plate (shown with broken line)

is present only on UL1500 models

OFF OFF

ON ON

.750

(19.05)

OFF OFF

ON ON

OFF OFF

ON ON

OFF OFF

ON ON

OFF OFF

ON ON

.750

(19.05)

.750

(19.05)

.750

(19.05)

.375

(9.53)

2 POLE

1.500

(38.10) 2.250

(57.15)

3 POLE

4 POLE

3.000

(76.20)

.218

(5.54)

2.065

(52.45)

.398

(10.11)

1.438

(36.53)

2.50

(63.5)

TAPPED #6-32 X .16 (4.06)

DEEP

M3 X 0.5 OPTIONAL

.375

(9.53)

1 POLE

.060

(1.52)

Series Trip Model

.750

(19.05)

.750

(19.05)

.750

(19.05) .385

(9.78)

1. 450

(36.83)

.732

(18.59)

2X Ø .156

(3.96)

PER POLE

.76

(19.3)

1.52

(38.6)

2.28

(57.9)

3.04

(77. 2)

1 POLE

2 POLE

3 POLE

4 POLE

.907

(23.04)

2.065

(52.45)

Panel Mounting Cutout Detail

Notes:

1. Terminal protrusion dimensions are referenced from

the back of the mounting panel

2. Mounting detail tolerance ± .005 (13) unless noted

3. Outline drawing tolerance ± .015 (.38) unless noted

Dimensions in brackets ( ) are in milimeters.

Disclaimer:

While TE and its affiliates referenced herein have made every reasonable effort to ensure the accuracy of the information contained in this document, TE

cannot assure that this information is error free. For this reason, TE does not make any representation or offer any guarantee that such information is

accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information at any time. TE expressly disclaims any implied

warranty regarding the information contained herein, including, but not limited to, the implied warranties of merchantability or fitness for a particular

purpose. TE‘s only obligations are those stated in TE’s Standard Terms and Conditions of Sale. TE will in no case be liable for any incidental, indirect or

consequential damages arising from or in connection with, including, but not limited to, the sale, resale, use or misuse of its products. Users should rely on

their own judgment to evaluate the suitability of a product for a certain purpose and test each product for its intended application.

In case of any potential ambiguities or questions, please don’t hesitate to contact us for clarification.

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

TE Connectivity:

W91-X112-5