REMEC RF 1.5-9.0 GHz LO 1.5-9.0 GHz IF 10-4000 MHz Triple Balanced Mixer Multi-octave Band, Miniature Microstrip Carrier Electrical Specifications (1): Conditions Parameter SSB Conversion loss:(2) (3) RF(MHz) 2.0-9.0 1.5-9.0 Isolation LO to RF: LO to IF: RF to IF: IF to RF: Input 1-dB Compression Point: 1.5-9.0 LO(MHz) 2.0-9.0 1.5-9.0 IF(MHz) 10-2000 10-4000 1.5-9.0 3.0-9.0 1.5-9.0 1.5-9.0 1.5-9.0 10-4000 10-4000 Input Third Order Intercept Point: 1.5-9.0 1.5-9.0 10-4000 LO Power: (4) 1.5-9.0 1.5-9.0 10-4000 Specifications Min Typical 6.0 dB 6.5 dB 15 dB 20 dB 22 dB 22 dB 27 dB 35 dB 31 dB 42 dB +5 dBm +8 dBm +12 dBm +15 dBm +14 dBm +17 dBm +21 dBm +24 dBm +10 dBm +13 dBm +17 dBm +21 dBm Notes: 1. Specifications are guaranteed when tested as a downconverter in a 50 Ohm system at +25C with the nominal LO power. Specifications indicated as typical are not guaranteed. 2. Noise figure is typically within 0.5 dB of conversion loss. 3. Conversion loss typically degrades less than 0.5 dB at +100C and improves less than 0.5 dB at -55C. 4. Usable LO drives are up to 2 dB below and 3 dB above nominal. 5. See Application Note M112, for aid in selecting the outline and for mounting and installation information. Max 7.5 dB 9.0 dB MM4xMS MM4xMS-15 LO Power 4 = +10 dBm 6 = +13 dBm 7 = +17 dBm 8 = +21 dBm MM44 MM46 MM47 MM48 MM44 MM46 MM47 MM48 MM44 MM46 MM47 MM48 Typical Performance at 25C MM4xMS MM4xMS-15 0.38 All dimensions are in inches and [mm]. Specifications subject to change without notice. 1590 Buckeye Drive - Milpitas, CA 95035 - TEL: 408-432-9898 - FAX: 408-432-1551 sales@remec.com - www.remec.com