MBR1090CT thru MBR10100CT
Vishay Semiconductors
for merly General Semiconductor
Document Number 88666 www.vishay.com
23-Apr-03 1
New Product
Dual High-Voltage Schottky Rectifiers
Rever se V oltage 90 to 100V
Forward Current 10A
Features
• Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
• Dual rectifier construction, positive center tap
• Metal silicon junction, majority carr ier conduction
• Low power loss, high efficiency
• Guardring for overvoltage protection
• For use in low voltage, high frequency inver ters, free
wheeling, and polarity protection applications
Mechanical Data
Case: JEDEC TO-220AB molded plastic body over
passivated chips
Terminals: Plated leads, solderable per
MIL-STD-750, Method 2026
High temperature soldering guaranteed:
250°C/10 seconds, 0.25" (6.35mm) from case
Polarity: As marked
Mounting Position: Any
Mounting T orque: 10 in-lbs maximum
Weight: 0.08 oz., 2.24 g
TO-220AB
Maximum Ratings and Thermal Characteristics (TC= 25°C unless otherwise noted)
Parameter Symbol
MBR1090CT MBR10100CT
Unit
Maximum repetitive peak reverse voltage VRRM 90 100 V
Wor king peak reverse voltage VRWM 90 100 V
Maximum DC blocking voltage VDC 90 100 V
Maximum average forward rectified current Total device 10
at TC= 105°CPer leg IF(AV) 5A
Peak forward surge current 8.3ms single half sine-wave IFSM 120 A
superimposed on rated load (JEDEC Method) per leg
Peak repetitive reverse current per leg at tp= 2µs, 1KHZIRRM 0.5 A
Voltage rate of change (rated VR) dv/dt 10,000 V/µs
Typical ther mal resistance per leg RθJC 4.4 °C/W
Operating junction and storage temperature range TJ, TSTG –65 to +150 °C
Electrical Characteristics(TC= 25°C unless otherwise noted)
Parameter Symbol
MBR1090CT MBR10100CT
Unit
Maximum instantaneous at IF = 5.0A, TC = 125°CVF0.75 V
forward voltage per leg (4) at IF = 5.0A, TC = 25°C 0.85
Maximum reverse current per leg TJ = 25°C 100 µA
at working peak reverse voltage(4) TJ = 100°CIR6.0 mA
Notes: (1) Clip mounting (on case), where lead does not overlap heatsink with 0.110”offset
(2) Clip mounting (on case), where leads do overlap heatsink
(3) Screw mounting with 4-40 screw, where washer diameter is ≤ 4.9 mm (0.19”)
(4) Pulse test: 300µs pulse width, 1% duty cycle
Dimensions in inches and (millimeters)