Type FCP Surface Mount Film Capacitors
Stable Stacked Metallized Film (PPS) Chips for Reow Soldering
Type FCP stacked metallized polyphenelene sulfide (PPS)
lm capacitors oer high capacitance per unit volume, stable
capacitance and DF over a wide temperature range, and
excellent high frequency performance. Type FCP capacitors
conform to standard EIA 0603, 0805, 1206, 1210, 1913 & 2416
surface mount case sizes and are packaged on tape and reel.
The Type FCP’s combination of high capacitance density and
excellent high frequency response makes it a great choice for
wireless and instrumentation applications.
Highlights
- Stacked metallized polyphenylene sulde (PPS) lm.
- High operating temperature to +125 ºC
- High capacitance per unit volume
- Excellent high frequency performance
- Typical C from –55 ºC to 105 ºC ≤ ±1.5%
- Stable cap and DF over wide temperature range
Specications
Capacitance Range 100 pF to 0.22 µF (1kHz at ≤5 Vrms)
Capacitance Tolerance ±5% (J) Standard, ±2% (G) Optional
Rated Voltage 16 Vdc and 50 Vdc
Dissipation Factor (Tan δ) 0.6% Max. (1 kHz at ≤5 Vrms)
Operating Temperature Range –55 ºC to +125 ºC (See Voltage derating chart for 0.12 - 0.22 µF
above 105 ºC)
Dielectric Strength 150% of rated Vdc for 60 s
Insulation Resistance 3000 MΩ Min. at 20 ºC, after 60 s (16 Vdc rated, test 10 Vdc; 50 Vdc
rated, test 50 Vdc)
Construction Stacked metallized polyphenylene sulde (PPS) lm. Terminations
are lead free with a Sn-Ag-Cu solder nish.
Life Test Capacitors subjected to 1000 hours of maximum rated tempera-
ture and 125% of the rated voltage will not have any signicant
visual damage, thecapacitance will be within ±2% of the initial
measured value, DF will be a maximum of 0.66%, and IR will be a
minimum of 1000 Megohms.
Resistance to Soldering Heat Capacitors subjected to a maximum of 260 °C reow soldering
process will not have any signicant visual damage, the dielectric
strength will be as specied, the capacitance will be within ±3% of
the initial measured value, DF will be a maximum of .66%, and IR
will be a minimum of 1000 Megohms.
Moisture Resistance Capacitors subjected to 1000 h at 40 °C and 90% to 95% RH and
rated voltage will not have any signicant visual damage, will
withstand 1.3 times the rated voltage for one minute, the capaci-
tance will be within ±2% of the initial measured value, DF will be a
maximum of 0.9%, and IR will be a minimum of 1000 Megohms.
RoHS Compliant
Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com