3.2mmx1.6mm SMD CHIP LED LAMP Part Number: APT3216ZGC-01 Green ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z 3.2mmx1.6mm SMT LED, 0.75mm thickness. The Green source color devices are made with InGaN z Low power consumption. on Sapphire Light Emitting Diode. z Wide viewing angle. Static electricity and surge damage the LEDS. z Ideal for backlight and indicator. It is recommended to use a wrist band or anti-electrostatic z Various colors and lens types available. glove when handling the LEDs. z Package : 2000pcs / reel. All devices, equipment and machinery must be electrically z Moisture sensitivity level : level 3. grounded. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAJ7170 REV NO: V.1 APPROVED: WYNEC CHECKED: Allen Liu DATE: AUG/26/2009 DRAWN: S.P.Chen PAGE: 1 OF 5 ERP: 1203009883 Selection Guide Part No. Dice APT3216ZGC-01 Lens Type Green (InGaN) WATER CLEAR Iv (mcd) [2] @ 20mA Viewing Angle [1] Min. Typ. 21/2 110 300 120 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Green D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 515 nm IF=20mA Green 525 nm IF=20mA Spectral Line Half-width Green 30 nm IF=20mA C Capacitance Green 45 pF VF=0V;f=1MHz VF [2] Forward Voltage Green 3.3 4.1 V IF=20mA IR Reverse Current Green 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25C Parameter Green Units Power dissipation 102.5 mW DC Forward Current 25 mA Peak Forward Current [1] 150 mA 5 V Reverse Voltage Operating Temperature -40C To +85C Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAJ7170 REV NO: V.1 APPROVED: WYNEC CHECKED: Allen Liu DATE: AUG/26/2009 DRAWN: S.P.Chen PAGE: 2 OF 5 ERP: 1203009883 Green APT3216ZGC-01 SPEC NO: DSAJ7170 REV NO: V.1 APPROVED: WYNEC CHECKED: Allen Liu DATE: AUG/26/2009 DRAWN: S.P.Chen PAGE: 3 OF 5 ERP: 1203009883 APT3216ZGC-01 Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: 0.1) Tape Dimensions (Units : mm) SPEC NO: DSAJ7170 REV NO: V.1 APPROVED: WYNEC CHECKED: Allen Liu DATE: AUG/26/2009 DRAWN: S.P.Chen PAGE: 4 OF 5 ERP: 1203009883 PACKING & LABEL SPECIFICATIONS SPEC NO: DSAJ7170 REV NO: V.1 APPROVED: WYNEC CHECKED: Allen Liu APT3216ZGC-01 DATE: AUG/26/2009 DRAWN: S.P.Chen PAGE: 5 OF 5 ERP: 1203009883