EURO
QUARTZ
EUROQUARTZ LIMITED Blacknell Lane CREWKERNE Somerset UK TA18 7HE
Tel: +44 (0)1460 230000 Fax: +44 (0)1460 230001 Email: info@euroquartz.co.uk www.euroquartz.co.uk
6 x 3.5mm SMD, 4 pad or 2 pad
DESCRIPTION
Miniature surface mount MF crystals incorporate a ceramic substrate
and hermetically-sealed metal lid. The compact size and low mass
with a high-specification crystal make MF crystals ideal for high
density applications as well as hand-held and communications
equipment.
Miniature size: 6.0mm x 3.5mm height
Tight tolerances available
High shock and vibration resistance
Ideal for PDAs, GPS, PCMCIA and hand-held equipment
FEATURES
OUTLINE & DIMENSIONS
Frequency Range
AT-Cut Fundamental: 10.0MHz to 50.0MHz
AT-Cut 3rd Overtone: 30.0MHz to 125.0MHz
Calibration Tolerance at 25ºC*: from ±5ppm
(±10, ±20 or ±30ppm standard)
Frequency stability
-10° to +60°C from ±5ppm
-20° to +70°C from ±10ppm
-40° to +90°C from ±15ppm
-55 to +125°C from ±20ppm
Storage Temperature: -55°~+105°C
Equivalent Series Resistance: See table
Shunt Capacitance (C0): 2pF to 4pF typical, 7pF maximum
Load Capacitance (CL): Series or from 8pF to 32pF
(Customer specified CL)
Ageing: <±3ppm per year at +25°C
Drive level: 100 mW maximum
Reflow Soldering: 10s maximum, 260°C twice
or 180s at 230°C, once.
Package: Ceramic base, metal lid,
Hermetic seal
Packaging: 16mm EIA tape and reel
1000 pieces per reel
SPECIFICATION
10.0 ~ 12.0 AT Fund. 80
12.1 ~ 16.0 AT Fund. 60
16.1 ~ 50.0 AT Fund. 40
30.0 ~ 40.0 AT 3rd OT 100
40.1 ~ 50.0 AT 3rd OT 80
50.1 ~ 125 AT 3rd OT 50
Frequency
Range MHz
Crystal Cut/
Mode
ESR
Ohms Max.
EQUIVALENT SERIES RESISTANCE
MF & MF2 CRYSTALS
PART NUMBER GENERATION
12.000MHz MF/20/30/-10+60/18pF/60RExample:
Nominal Frequency
Package
(MF = 4 pad, MF2 = 2 pad
Calibration tolerance
at 25°C (±ppm)
Temperature Stability
over temp. range (±ppm)
Operating Temp. Range (°C)
(Lower and upper limits)
Load Capacitance
(Either SR for series or CL in pF)
Equivalent Series Resistance
(Optional - use when special
value is required)
MF2
MF