Document Number: 28102 For technical questions, contact: dc-film@vishay.com www.vishay.com
Revision: 22-Dec-10 29
DC Film Capacitors
MKT Radial Lacquered Type
MKT365, MKT366, MKT367
Vishay BCcomponents
Notes
(1) Hole Ø 1.0 for dt = 0.5 mm
(2) 0 ≤ α < 50°
(3) A = 1.7 ± 0.3 mm
CONSTRUCTION
Mono construction
FEATURES
•AEC-Q200 qualified
•Available taped and loose in box
•Compliant to RoHS Directive 2002/95/EC
APPLICATIONS
Blocking and coupling, bypass and energy
reservoir.
REFERENCE STANDARDS
IEC 60384-2
MARKING
C-value; rated voltage; tolerance
DIELECTRIC
Polyester film
ELECTRODES
Metalized
RATED VOLTAGE
63 VDC, 100 VDC, 250 VDC, 400 VDC
RATED VOLTAGE
40 VAC, 63 VAC, 160 VAC, 220 VAC
COATING ENCAPSULATION
Flame retardant epoxy material (UL-class 94 V-0)
CLIMATIC TESTING CLASS ACC. TO
IEC 60068-1
55/105/56
RATED TEMPERATURE
85 °C
CAPACITANCE RANGE (E12 SERIES)
365: 0.01 µF to 1.0 µF
366: 0.0033 µF to 1.0 µF
367: 0.0033 µF to 1.0 µF
CAPACITANCE TOLERANCE
± 10 %, ± 5 %
LEADS
Tinned wire
MAXIMUM APPLICATION TEMPERATURE
105 °C
DETAIL SPECIFICATION
For more detailed data and test requirements contact:
dc-film@vishay.com
Seating
plane (1)
h
l
t
Ø dt
A (3)
P+ 0.4
- 0.2
α
(2)
l
w
366 Kinked Leads
Seating
plane (1)
h
lt
Ø dt
A
(3)
P+ 0.4
- 0.2
α
(2)
l
w
365 Bent Back Leads
Seating
plane (1)
h
lt
Ø dt
P+ 0.4
- 0.2
lw
367 Straight Leads
Ø 1.3
≤ 1.5
MKT365, MKT366, MKT367
Vishay BCcomponents DC Film Capacitors
MKT Radial Lacquered Type
www.vishay.com For technical questions, contact: dc-film@vishay.com Document Number: 28102
30 Revision: 22-Dec-10
COMPOSITION OF CATALOG NUMBER: 365
Note
(1) For detailed tape specifications refer to packaging information: www.vishay.com/doc?28139
SPECIFIC REFERENCE DATA: 365
Note
(1) See “Voltage Proof Test for Metallized Film Capacitors”: www.vishay.com/doc?28169
DESCRIPTION VALUE
Tangent of loss angle: at 1 kHz at 10 kHz at 100 kHz
C ≤ 0.47 µF ≤ 75 x 10-4 ≤ 130 x 10-4 ≤ 225 x 10-4
C > 0.47 µF ≤ 75 x 10-4 ≤ 130 x 10-4 -
Rated voltage pulse slope (dU/dt)R at 63 VDC 100 VDC 250 VDC 400 VDC
110 V/µs 110 V/µs 130 V/µs 170 V/µs
R between leads, for C ≤ 0.33 µF
at 10 V; 1 min > 15 000 MΩ
at 100 V; 1 min > 15 000 MΩ> 30 000 MΩ> 30 000 MΩ
RC between leads, for C > 0.33 µF at 10 V; 1 min > 5000 s -
R between interconnecting leads and casing, 100 V; 1 min > 30 000 MΩ
Withstanding (DC) voltage (cut off current 10 mA) (1);
rise time ≤ 1000 V/s 100 V; 1 min 160 V; 1 min 400 V; 1 min 640 V; 1 min
Maximum application temperature 105 °C
BFC2 365 XX YY Y
2222 (*) 365 XX YY Y
TYPE PACKAGING LEAD CONFIGURATION PREFERRED TYPES
C-TOL. 63 V 100 V 250 V 400 V
365
Ammopack Bent back leads;
H = 16.0 mm; P0 = 12.7 mm
± 10 %15254555
± 5 %16264656
Dimensions of these code numbers stay between brackets
Taped on reel (1) Bent back leads;
H = 16.0 mm; P0 = 12.7 mm
± 10 %11214151
± 5 %12224252
Dimensions of these code numbers stay between brackets
CAPACITANCE
(numerically)
TYPE AND PITCHES
365 5.0 mm
Example:
104 = 10 x 10 = 100 nF
MULTIPLIER
(nF)
0.1 2
13
10 4
100 5
(*) Old ordering number
Document Number: 28102 For technical questions, contact: dc-film@vishay.com www.vishay.com
Revision: 22-Dec-10 31
MKT365, MKT366, MKT367
DC Film Capacitors
MKT Radial Lacquered Type Vishay BCcomponents
URDC =63V; U
RAC = 40 V (bent back leads)
Notes
(1) Net weight for short lead products only
• SPQ = Standard Packing Quantity
URDC =100V; U
RAC = 63 V (bent back leads)
Notes
(1) Net weight for short lead products only
• SPQ = Standard Packing Quantity
C
(µF)
DIMENSIONS
wmax. xh
max. xl
max.
(mm)
MASS
(g) (1)
CATALOG NUMBER BFC2 365 XXYYY AND PACKAGING
AMMOPACK REEL
C-VALUE
H = 16.0 mm H = 16.0 mm
C-tol. =
± 10 %
C-tol. =
± 5 %
C-tol. =
± 10 %
C-tol. =
± 5 %
XX
(SPQ)
XX
(SPQ)
XX
(SPQ)
XX
(SPQ) ..YYY
Pitch = 5.0 mm + 0.4 mm/- 0.2 mm; dt= 0.60 ± 0.06 mm
0.12
0.15
0.18
0.22
4.0 x 13.5 x 10.0 0.35 15...
(1500)
16...
(1500)
11...
(1500)
12...
(1500)
124
154
184
224
0.27 4.5 x 14.0 x 10.0 0.39 15...
(1000)
16...
(1000)
11...
(1000)
12...
(1000) 274
0.33
0.39 5.0 x 14.5 x 10.0 0.45 15...
(1500)
16...
(1000)
11...
(1000)
12...
(1000)
334
394
0.47
0.56
0.68
0.82
1.0
5.5 x 15.0 x 10.0 0.55 15...
(1000)
16...
(1000)
11...
(1000)
12...
(1000)
474
564
684
824
105
C
(µF)
DIMENSIONS
wmax. xh
max. xl
max.
(mm)
MASS
(g) (1)
CATALOG NUMBER BFC2 365 XXYYY AND PACKAGING
AMMOPACK REEL
C-VALUE
H = 16.0 mm H = 16.0 mm
C-tol. =
± 10 %
C-tol. =
± 5 %
C-tol. =
± 10 %
C-tol. =
± 5 %
XX
(SPQ)
XX
(SPQ)
XX
(SPQ)
XX
(SPQ) ..YYY
Pitch = 5.0 mm + 0.4 mm/- 0.2 mm; dt= 0.60 ± 0.06 mm
0.039
0.047
0.056
0.068
0.082
0.1
4.0 x 13.5 x 10.0 0.35 25...
(1500)
26...
(1500)
21...
(1500)
22...
(1500)
393
473
563
683
823
104
0.12 4.5 x 14.0 x 10.5 0.40 25...
(1000)
26...
(1000)
21...
(1000)
22...
(1000) 124
0.15
0.18 5.0 x 14.5 x 10.5 0.45 25...
(1000)
26...
(1000)
21...
(1000)
22...
(1000)
154
184
0.22 5.5 x 15.0 x 10.5 0.57 25...
(1000)
26...
(1000)
21...
(1000)
22...
(1000) 224
0.27
0.33
0.39
0.47
6.0 x 15.5 x 10.5 0.60 25...
(1000)
26...
(1000)
21...
(1000)
22...
(1000)
274
334
394
474
MKT365, MKT366, MKT367
Vishay BCcomponents DC Film Capacitors
MKT Radial Lacquered Type
www.vishay.com For technical questions, contact: dc-film@vishay.com Document Number: 28102
32 Revision: 22-Dec-10
URDC = 250 V; URAC = 160 V (bent back leads)
Notes
(1) Net weight for short lead products only
• SPQ = Standard Packing Quantity
URDC = 400 V; URAC = 220 V (bent back leads)
Notes
(1) Net weight for short lead products only
• SPQ = Standard Packing Quantity
C
(µF)
DIMENSIONS
wmax. xh
max. xl
max.
(mm)
MASS
(g) (1)
CATALOG NUMBER BFC2 365 XXYYY AND PACKAGING
AMMOPACK REEL
C-VALUE
H = 16.0 mm H = 16.0 mm
C-tol. =
± 10 %
C-tol. =
± 5 %
C-tol. =
± 10 %
C-tol. =
± 5 %
XX
(SPQ)
XX
(SPQ)
XX
(SPQ)
XX
(SPQ) ..YYY
Pitch = 5.0 mm + 0.4 mm/- 0.2 mm; dt= 0.60 ± 0.06 mm
0.018
0.022
0.027
0.033
0.039
0.047
0.056
4.0 x 13.5 x 10.0 0.35 45...
(1500)
46...
(1500)
41...
(1500)
42...
(1500)
183
223
273
333
393
473
563
0.068 4.5 x 14.0 x 10.0 0.39 45...
(1250)
46...
(1250)
41...
(1000)
42...
(1000) 683
0.082 4.5 x 13.0 x 10.0 0.38 45...
(1250)
46...
(1250)
41...
(1250)
42...
(1250) 823
0.1 5.0 x 13.5 x 10.0 0.40 45...
(1000)
46...
(1000)
41...
(1250)
42...
(1250) 104
0.12 5.5 x 14.0 x 10.0 0.50 45...
(1000)
46...
(1000)
41...
(1000)
42...
(1000) 124
0.15 5.5 x 15.5 x 10.0 0.58 45...
(1000)
46...
(1000)
41...
(1000)
42...
(1000) 154
C
(µF)
DIMENSIONS
wmax. xh
max. xl
max.
(mm)
MASS
(g) (1)
CATALOG NUMBER BFC2 365 XXYYY AND PACKAGING
AMMOPACK REEL
C-VALUE
H = 16.0 mm H = 16.0 mm
C-tol. =
± 10 %
C-tol. =
± 5 %
C-tol. =
± 10 %
C-tol. =
± 5 %
XX
(SPQ)
XX
(SPQ)
XX
(SPQ)
XX
(SPQ) ..YYY
Pitch = 5.0 mm + 0.4 mm/- 0.2 mm; dt= 0.60 ± 0.06 mm
0.0033
0.0039
0.0047
0.0056
0.0068
0.0082
0.01
0.012
0.015
4.0 x 13.5 x 10.0 0.35 55...
(1500)
56...
(1500)
51...
(1500)
52...
(1500)
332
392
472
562
682
822
103
123
153
0.018 4.5 x 13.0 x 10.0 0.38 55...
(1250)
56...
(1250)
51...
(1250)
52...
(1250) 183
0.022 5.0 x 13.5 x 10.0 0.0 55...
(1000)
56...
(1000)
51...
(1250)
52...
(1250) 223
0.027 4.0 x 12.5 x 10.0 0.35 55...
(1500)
56...
(1500)
51...
(1500)
52...
(1500) 273
0.033 4.5 x 13.0 x 10.0 0.38 55...
(1200)
56...
(1250)
51...
(1250)
52...
(1250) 333
0.039
0.047 5.0 x 13.5 x 10.0 0.40 55...
(1000)
56...
(1000)
51...
(1250)
52...
(1250)
393
473
0.056 5.5 x 14.0 x 10.0 0.50 55...
(1000)
56...
(1000)
51...
(1000)
52...
(1000) 563
Document Number: 28102 For technical questions, contact: dc-film@vishay.com www.vishay.com
Revision: 22-Dec-10 33
MKT365, MKT366, MKT367
DC Film Capacitors
MKT Radial Lacquered Type Vishay BCcomponents
COMPOSITION OF CATALOG NUMBER: 366
Note
(1) For detailed tape specifications refer to packaging information: www.vishay.com/doc?28139
SPECIFIC REFERENCE DATA: 366
Note
(1) See “Voltage Proof Test for Metallized Film Capacitors”: www.vishay.com/doc?28169
DESCRIPTION VALUE
Tangent of loss angle: at 1 kHz at 10 kHz at 100 kHz
C ≤ 0.47 µF ≤ 75 x 10-4 ≤ 130 x 10-4 ≤ 225 x 10-4
C > 0.47 µF ≤ 75 x 10-4 ≤ 130 x 10-4 -
Rated voltage pulse slope (dU/dt)R at 63 VDC 100 VDC 250 VDC 400 VDC
110 V/µs 110 V/µs 130 V/µs 170 V/µs
R between leads, for C ≤ 0.33 µF
at 10 V; 1 min > 15 000 MΩ
at 100 V; 1 min > 15 000 MΩ> 30 000 MΩ> 30 000 MΩ
RC between leads, for C > 0.33 µF at 10 V; 1 min > 5000 s -
R between interconnecting leads and casing, 100 V; 1 min > 30 000 MΩ
Withstanding (DC) voltage (cut off current 10 mA) (1);
rise time ≤ 1000 V/s 100 V; 1 min 160 V; 1 min 400 V; 1 min 640 V; 1 min
Maximum application temperature 105 °C
BFC2 366 XX YY Y
2222 (*) 366 XX YY Y
TYPE PACKAGING LEAD CONFIGURATION PREFERRED TYPES
C-TOL. 63 V 100 V 250 V 400 V
Pitch = 7.5 mm
366
Loose in box
Kinked; Lead length
4.0 + 1.0/- 0.5 mm
± 10 %15254555
± 5 %16264656
Kinked;
Lead length 17.0 ± 4.0 mm
± 10 %11214151
± 5 %12224252
Ammopack (1) Kinked;
H = 16.0 mm; P0 = 12.7 mm
± 10 %13234353
± 5 %17274757
CAPACITANCE
(numerically)
TYPE AND PITCHES
366 7.5 mm
Example:
104 = 10 x 10 = 100 nF
MULTIPLIER
(nF)
0.1 2
13
10 4
100 5
(*) Old ordering number
MKT365, MKT366, MKT367
Vishay BCcomponents DC Film Capacitors
MKT Radial Lacquered Type
www.vishay.com For technical questions, contact: dc-film@vishay.com Document Number: 28102
34 Revision: 22-Dec-10
URDC=63V; U
RAC = 40 V
Notes
(1) Net weight for short lead products only
• SPQ = Standard Packing Quantity
URDC = 100 V; URAC = 63 V
Notes
(1) Net weight for short lead products only
• SPQ = Standard Packing Quantity
C
(µF)
DIMENSIONS
wmax. xh
max. xl
max.
(mm)
MASS
(g) (1)
CATALOG NUMBER BFC2 366 XXYYY AND PACKAGING
LOOSE IN BOX AMMOPACK
C-VALUE
lt = 4.0 mm+ 1.0 mm/- 0.5 mm lt = 17.0 mm ± 4.0 mm H = 16.0 mm
C-tol. =
± 10 %
C-tol. =
± 5 %
C-tol. =
± 10 %
C-tol. =
± 5 %
C-tol. =
± 10 %
C-tol. =
± 5 %
XX
(SPQ)
XX
(SPQ)
XX
(SPQ)
XX
(SPQ)
XX
(SPQ)
XX
(SPQ) ..YYY
Pitch = 7.5 mm + 0.4 mm/- 0.2 mm; dt= 0.60 ± 0.06 mm
0.12
0.15
0.18
0.22
4.0 x 12.0 x 10.0 0.30 15...
(1000)
16...
(1000)
11...
(1000)
12...
(1000)
13...
(1500)
17...
(1500)
124
154
184
224
0.27 4.5 x 13.0 x 10.5 0.38 15...
(1000)
16...
(1000)
11...
(1000)
12...
(1000)
13...
(1250)
17...
(1250) 274
0.33
0.39 5.0 x 13.5 x 10.5 0.43 15...
(1000)
16...
(1000)
11...
(1000)
12...
(1000)
13...
(1000)
17...
(1000)
334
394
0.47 5.5 x 14.0 x 10.5 0.53 15...
(1000)
16...
(1000)
11...
(1000)
12...
(1000)
13...
(1000)
17...
(1000) 474
0.56
0.68
0.82
1.0
5.5 x 14.5 x 10.5 0.54 15...
(1000)
16...
(1000)
11...
(1000)
12...
(1000)
13...
(1000)
17...
(1000)
564
684
824
105
C
(µF)
DIMENSIONS
wmax. xh
max. xl
max.
(mm)
MASS
(g) (1)
CATALOG NUMBER BFC2 366 XXYYY AND PACKAGING
LOOSE IN BOX AMMOPACK
C-VALUE
lt = 4.0 mm + 1.0 mm/- 0.5 mm lt = 17.0 mm ± 4.0 mm H = 16.0 mm
C-tol. =
± 10 %
C-tol. =
± 5 %
C-tol. =
± 10 %
C-tol. =
± 5 %
C-tol. =
± 10 %
C-tol. =
± 5 %
XX
(SPQ)
XX
(SPQ)
XX
(SPQ)
XX
(SPQ)
XX
(SPQ)
XX
(SPQ) ..YYY
Pitch = 7.5 mm + 0.4 mm/- 0.2 mm; dt= 0.60 ± 0.06 mm
0.039
0.047
0.056
0.068
0.082
4.0 x 12.0 x 10.0 0.30 25...
(1000)
26...
(1000)
21...
(1000)
22...
(1000)
23...
(1500)
27...
(1500)
393
473
563
683
823
0.1 4.0 x 13.0 x 10.0 0.26 25...
(1000)
26...
(1000)
21...
(1000)
22...
(1000)
23...
(1500)
27...
(1500) 104
0.12 4.5 x 13.0 x 10.5 0.38 25...
(1000)
26...
(1000)
21...
(1000)
22...
(1000)
23...
(1250)
27...
(1250) 124
0.15 5.0 x 13.0 x 15.0 0.40 25...
(1000)
26...
(1000)
21...
(1000)
22...
(1000)
23...
(1000)
27...
(1000) 154
0.18 5.0 x 13.5 x 10.5 0.43 25...
(1000)
26...
(1000)
21...
(1000)
22...
(1000)
23...
(1000)
27...
(1000) 184
0.22 5.5 x 13.5 x 10.5 0.50 25...
(1000)
26...
(1000)
21...
(1000)
22...
(1000)
23...
(1000)
27...
(1000) 224
0.27 6.0 x 14.5 x 10.5 0.55 25...
(1000)
26...
(1000)
21...
(1000)
22...
(1000)
23...
(1000)
27...
(1000) 274
0.33
0.39
0.47
6.0 x 15.0 x 10.5 0.58 25...
(1000)
26...
(1000)
21...
(1000)
22...
(1000)
23...
(1000)
27...
(1000)
334
394
474
Document Number: 28102 For technical questions, contact: dc-film@vishay.com www.vishay.com
Revision: 22-Dec-10 35
MKT365, MKT366, MKT367
DC Film Capacitors
MKT Radial Lacquered Type Vishay BCcomponents
URDC =250V; U
RAC = 160 V
Notes
(1) Net weight for short lead products only
• SPQ = Standard Packing Quantity
URDC = 400 V; URAC = 220 V
Notes
(1) Net weight for short lead products only
• SPQ = Standard Packing Quantity
C
(µF)
DIMENSIONS
wmax. xh
max. xl
max.
(mm)
MASS
(g) (1)
CATALOG NUMBER BFC2 366 XXYYY AND PACKAGING
LOOSE IN BOX AMMOPACK
C-VALUE
lt = 4.0 mm + 1.0 mm/- 0.5 mm lt = 17.0 mm ± 4.0 mm H = 16.0 mm
C-tol. =
± 10 %
C-tol. =
± 5 %
C-tol. =
± 10 %
C-tol. =
± 5 %
C-tol. =
± 10 %
C-tol. =
± 5 %
XX
(SPQ)
XX
(SPQ)
XX
(SPQ)
XX
(SPQ)
XX
(SPQ)
XX
(SPQ) ..YYY
Pitch = 7.5 mm + 0.4 mm/- 0.2 mm; dt= 0.60 ± 0.06 mm
0.018
0.022
0.027
0.033
0.039
0.047
4.0 x 13.0 x 10.0 0.26 45...
(1000)
46...
(1000)
41...
(1000)
42...
(1000)
43...
(1500)
47...
(1500)
183
223
273
333
393
473
0.056 4.0 x 14.0 x 10.0 0.35 45...
(1000)
46...
(1000)
41...
(1000)
42...
(1000)
43...
(1500)
47...
(1500) 563
0.068 4.5 x 14.0 x 10.0 0.39 45...
(1000)
46...
(1000)
41...
(1000)
42...
(1000)
43...
(1250)
47...
(1250) 683
0.082 4.5 x 13.0 x 10.0 0.38 45...
(1000)
46...
(1000)
41...
(1000)
42...
(1000)
43...
(1250)
47...
(1250) 823
0.1 5.0 x 13.5 x 10.0 0.40 45...
(1000)
46...
(1000)
41...
(1000)
42...
(1000)
43...
(1000)
47...
(1000) 104
0.12 5.5 x 14.0 x 10.0 0.50 45...
(1000)
46...
(1000)
41...
(1000)
42...
(1000)
43...
(1000)
47...
(1000) 124
0.15 5.5 x 15.5 x 10.0 0.58 45...
(1000)
46...
(1000)
41...
(1000)
42...
(1000)
43...
(1000)
47...
(1000) 154
C
(µF)
DIMENSIONS
wmax. xh
max. xl
max.
(mm)
MASS
(g) (1)
CATALOG NUMBER BFC2 366 XXYYY AND PACKAGING
LOOSE IN BOX AMMOPACK
C-VALUE
lt = 4.0 mm + 1.0 mm/- 0.5 mm lt = 17.0 mm ± 4.0 mm H = 16.0 mm
C-tol. =
± 10 %
C-tol. =
± 5 %
C-tol. =
± 10 %
C-tol. =
± 5 %
C-tol. =
± 10 %
C-tol. =
± 5 %
XX
(SPQ)
XX
(SPQ)
XX
(SPQ)
XX
(SPQ)
XX
(SPQ)
XX
(SPQ) ..YYY
Pitch = 7.5 mm + 0.4 mm/- 0.2 mm; dt= 0.60 ± 0.06 mm
0.0033
0.0039
0.0047
4.0 x 12.0 x 10.0 0.30 55...
(1000)
56...
(1000)
51...
(1000)
52...
(1000)
53...
(1500)
57...
(1500)
332
392
472
0.0056
0.0068
0.0082
0.01
0.012
0.015
4.0 x 13.0 x 10.0 0.26 55...
(1000)
56...
(1000)
51...
(1000)
52...
(1000)
53...
(1500)
57...
(1500)
562
682
822
103
123
153
0.018 4.0 x 13.5 x 10.0 0.35 55...
(1000)
56...
(1000)
51...
(1000)
52...
(1000)
53...
(1250)
57...
(1250) 183
0.022 5.0 x 14.0 x 10.0 0.45 55...
(1000)
56...
(1000)
51...
(1000)
52...
(1000)
53...
(1000)
57...
(1000) 223
0.027 4.0 x 12.5 x 10.0 0.35 55...
(1000)
56...
(1000)
51...
(1000)
52...
(1000)
53...
(1500)
57...
(1500) 273
0.033 4.5 x 13.0 x 10.0 0.38 55...
(1000)
56...
(1000)
51...
(1000)
52...
(1000)
53...
(1250)
57...
(1250) 333
0.039
0.047 5.0 x 13.5 x 10.0 0.40 55...
(1000)
56...
(1000)
51...
(1000)
52...
(1000)
53...
(1000)
57...
(1000)
393
473
0.056 5.5 x 14.0 x 10.0 0.50 55...
(1000)
56...
(1000)
51...
(1000)
52...
(1000)
53...
(1000)
57...
(1000) 563
MKT365, MKT366, MKT367
Vishay BCcomponents DC Film Capacitors
MKT Radial Lacquered Type
www.vishay.com For technical questions, contact: dc-film@vishay.com Document Number: 28102
36 Revision: 22-Dec-10
COMPOSITION OF CATALOG NUMBER: 367
Note
(1) For detailed tape specifications refer to packaging information: www.vishay.com/doc?28139
SPECIFIC REFERENCE DATA: 367
Note
(1) See “Voltage Proof Test for Metallized Film Capacitors”: www.vishay.com/doc?28169
DESCRIPTION VALUE
Tangent of loss angle: at 1 kHz at 10 kHz at 100 kHz
C ≤ 0.47 µF ≤ 75 x 10-4 ≤ 130 x 10-4 ≤ 225 x 10-4
C > 0.47 µF ≤ 75 x 10-4 ≤ 130 x 10-4 -
Rated voltage pulse slope (dU/dt)R at 63 VDC 100 VDC 250 VDC 400 VDC
110 V/µs 110 V/µs 130 V/µs 170 Vµs
R between leads, for C ≤ 0.33 µF
at 10 V; 1 min > 15 000 MΩ
at 100 V; 1 min > 15 000 MΩ> 30 000 MΩ> 30 000 MΩ
RC between leads, for C > 0.33 µF at 10 V; 1 min > 5000 s -
R between interconnecting leads and casing, 100 V; 1 min > 30 000 MΩ
Withstanding (DC) voltage (cut off current 10 mA) (1);
rise time ≤ 1000 V/s 100 V; 1 min 160 V; 1 min 400 V; 1 min 640 V; 1 min
Maximum application temperature 105 °C
BFC2 367 XX YY Y
2222 (*) 367 XX YY Y
TYPE PACKAGING LEAD CONFIGURATION PREFERRED TYPES
C-TOL. 63 V 100 V 250 V 400 V
Pitch = 7.5 mm
367
Loose in box
Straight; Lead length
4.0 + 1.0/- 0.5 mm
± 10 %15254555
± 5 %16264656
Straight;
Lead length 22.0 ± 4.0 mm
± 10 %11214151
± 5 %12224252
Ammopack (1) Straight;
H = 18.5 mm; P0 = 12.7 mm
± 10 %13234353
± 5 %17274757
CAPACITANCE
(numerically)
TYPE AND PITCHES
367 7.5 mm
Example:
104 = 10 x 10 = 100 nF
MULTIPLIER
(nF)
0.1 2
13
10 4
100 5
(*) Old ordering number
Document Number: 28102 For technical questions, contact: dc-film@vishay.com www.vishay.com
Revision: 22-Dec-10 37
MKT365, MKT366, MKT367
DC Film Capacitors
MKT Radial Lacquered Type Vishay BCcomponents
URDC =63V; U
RAC = 40 V
Notes
(1) Net weight for short lead products only
• SPQ = Standard Packing Quantity
URDC =100V; U
RAC = 63 V
Notes
(1) Net weight for short lead products only
• SPQ = Standard Packing Quantity
C
(µF)
DIMENSIONS
wmax. xh
max. xl
max.
(mm)
MASS
(g) (1)
CATALOG NUMBER BFC2 367 XXYYY AND PACKAGING
LOOSE IN BOX AMMOPACK
C-VALUE
lt = 4.0 mm + 1.0 mm/- 0.5 mm lt = 22.0 mm ± 4.0 mm H = 18.5 mm
C-tol. =
± 10 %
C-tol. =
± 5 %
C-tol. =
± 10 %
C-tol. =
± 5 %
C-tol. =
± 10 %
C-tol. =
± 5 %
XX
(SPQ)
XX
(SPQ)
XX
(SPQ)
XX
(SPQ)
XX
(SPQ)
XX
(SPQ) ..YYY
Pitch = 7.5 mm + 0.4 mm/- 0.2 mm; dt= 0.60 ± 0.06 mm
0.12
0.15
0.18
0.22
4.0 x 9.5 x 10.0 0.23 15...
(1000)
16...
(1000)
11...
(1000)
12...
(1000)
13...
(1500)
17...
(1500)
124
154
184
224
0.27 4.5 x 10.0 x 10.5 0.37 15...
(1000)
16...
(1000)
11...
(1000)
12...
(1000)
13...
(1000)
17...
(1000) 274
0.33
0.39 5.0 x 10.5 x 10.5 0.39 15...
(1000)
16...
(1000)
11...
(1000)
12...
(1000)
13...
(1000)
17...
(1000)
334
394
0.47 5.5 x 11.0 x 10.5 0.44 15...
(1000)
16...
(1000)
11...
(1000)
12...
(1000)
13...
(1000)
17...
(1000) 474
0.56
0.68
0.82
1.0
5.5 x 12.0 x 10.5 0.46 15...
(1000)
16...
(1000)
11...
(1000)
12...
(1000)
13...
(1000)
17...
(1000)
564
684
824
105
C
(µF)
DIMENSIONS
wmax. xh
max. xl
max.
(mm)
MASS
(g) (1)
CATALOG NUMBER BFC2 367 XXYYY AND PACKAGING
LOOSE IN BOX AMMOPACK
C-VALUE
lt = 4.0 mm + 1.0 mm/- 0.5 mm lt = 22.0 mm ± 4.0 mm H = 18.5 mm
C-tol. =
± 10 %
C-tol. =
± 5 %
C-tol. =
± 10 %
C-tol. =
± 5 %
C-tol. =
± 10 %
C-tol. =
± 5 %
XX
(SPQ)
XX
(SPQ)
XX
(SPQ)
XX
(SPQ)
XX
(SPQ)
XX
(SPQ) ..YYY
Pitch = 7.5 mm + 0.4 mm/- 0.2 mm; dt= 0.60 ± 0.06 mm
0.039
0.047
0.056
0.068
0.082
0.1
4.0 x 9.5 x 10.0 0.23 25...
(1000)
26...
(1000)
21...
(1000)
22...
(1000)
23...
(1500)
27...
(1500)
393
473
563
683
823
104
0.12 4.5 x 10.0 x 10.5 0.37 25...
(1000)
26...
(1000)
21...
(1000)
22...
(1000)
23...
(1000)
27...
(1000) 124
0.15
0.18 5.0 x 10.5 x 10.5 0.39 25...
(1000)
26...
(1000)
21...
(1000)
22...
(1000)
23...
(1000)
27...
(1000)
154
184
0.22 5.5 x 11.5 x 10.5 0.44 25...
(1000)
26...
(1000)
21...
(1000)
22...
(1000)
23...
(1000)
27...
(1000) 224
0.27
0.33
0.39
0.47
6.0 x 12.5 x 10.5 0.55 25...
(1000)
26...
(1000)
21...
(1000)
22...
(1000)
23...
(1000)
27...
(1000)
274
334
394
474
MKT365, MKT366, MKT367
Vishay BCcomponents DC Film Capacitors
MKT Radial Lacquered Type
www.vishay.com For technical questions, contact: dc-film@vishay.com Document Number: 28102
38 Revision: 22-Dec-10
URDC = 250 V; URAC = 160 V
Notes
(1) Net weight for short lead products only
• SPQ = Standard Packing Quantity
URDC = 400 V; URAC = 220 V
Notes
(1) Net weight for short lead products only
• SPQ = Standard Packing Quantity
C
(µF)
DIMENSIONS
wmax. xh
max. xl
max.
(mm)
MASS
(g) (1)
CATALOG NUMBER BFC2 367 XXYYY AND PACKAGING
LOOSE IN BOX AMMOPACK
C-VALUE
lt = 4.0 mm + 1.0 mm/- 0.5 mm lt = 22.0 mm ± 4.0mm H = 18.5 mm
C-tol. =
± 10 %
C-tol. =
± 5 %
C-tol. =
± 10 %
C-tol. =
± 5 %
C-tol. =
± 10 %
C-tol. =
± 5 %
XX
(SPQ)
XX
(SPQ)
XX
(SPQ)
XX
(SPQ)
XX
(SPQ)
XX
(SPQ) ..YYY
Pitch = 7.5 mm + 0.4 mm/- 0.2 mm; dt= 0.60 ± 0.06 mm
0.018
0.022
0.027
0.033
0.039
0.047
0.056
4.0 x 9.5 x 10.0 0.23 45...
(1000)
46...
(1000)
41...
(1000)
42...
(1000)
43...
(1500)
47...
(1500)
183
223
273
333
393
473
563
0.068
0.082 4.5 x 10.0 x 10.0 0.37 45...
(1000)
46...
(1000)
41...
(1000)
42...
(1000)
43...
(1000)
47...
(1000)
683
823
0.1 5.0 x 10.5 x 10.0 0.39 45...
(1000)
46...
(1000)
41...
(1000)
42...
(1000)
43...
(1000)
47...
(1000) 104
0.12 5.5 x 11.0 x 10.0 0.42 45...
(1000)
46...
(1000)
41...
(1000)
42...
(1000)
43...
(1000)
47...
(1000) 124
0.15 5.5 x 12.5 x 10.0 0.48 45...
(1000)
46...
(1000)
41...
(1000)
42...
(1000)
43...
(1000)
47...
(1000) 154
C
(µF)
DIMENSIONS
wmax. xh
max. xl
max.
(mm)
MASS
(g) (1)
CATALOG NUMBER BFC2 367 XXYYY AND PACKAGING
LOOSE IN BOX AMMOPACK
C-VALUE
lt = 4.0 mm + 1.0 mm/- 0.5 mm lt = 22.0 ± 4.0 mm H = 18.5 mm
C-tol. =
± 10 %
C-tol. =
± 5 %
C-tol. =
± 10 %
C-tol. =
± 5 %
C-tol. =
± 10 %
C-tol. =
± 5 %
XX
(SPQ)
XX
(SPQ)
XX
(SPQ)
XX
(SPQ)
XX
(SPQ)
XX
(SPQ) ..YYY
Pitch = 7.5 mm + 0.4 mm/- 0.2 mm; dt= 0.60 ± 0.06 mm
0.0033
0.0039
0.0047
0.0056
0.0068
0.0082
0.01
0.012
0.015
4.0 x 9.5 x 10.0 0.23 55...
(1000)
56...
(1000)
51...
(1000)
52...
(1000)
53...
(1500)
57...
(1500)
332
392
472
562
682
822
103
123
153
0.018 4.5 x 10.0 x 10.0 0.37 55...
(1000)
56...
(1000)
51...
(1000)
52...
(1000)
53...
(1000)
57...
(1000) 183
0.022 5.0 x 10.5 x 10.0 0.39 55...
(1000)
56...
(1000)
51...
(1000)
52...
(1000)
53...
(1000)
57...
(1000) 223
0.027 4.0 x 9.5 x 10.0 0.23 55...
(1000)
56...
(1000)
51...
(1000)
52...
(1000)
53...
(1500)
57...
(1500) 273
0.033 4.5 x 10.0 x 10.0 0.37 55...
(1000)
56...
(1000)
51...
(1000)
52...
(1000)
53...
(1000)
57...
(1000) 333
0.039
0.047 5.0 x 10.5 x 10.0 0.39 55...
(1000)
56...
(1000)
51...
(1000)
52...
(1000)
53...
(1000)
57...
(1000)
393
473
0.056 5.5 x 11.0 x 10.0 0.42 55...
(1000)
56...
(1000)
51...
(1000)
52...
(1000)
53...
(1000)
57...
(1000) 563
Document Number: 28102 For technical questions, contact: dc-film@vishay.com www.vishay.com
Revision: 22-Dec-10 39
MKT365, MKT366, MKT367
DC Film Capacitors
MKT Radial Lacquered Type Vishay BCcomponents
MOUNTING
Normal Use
The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for
mounting in printed-circuit boards by means of automatic insertion machines.
For detailed tape specifications refer to packaging information: www.vishay.com/doc?28139
Specific Method of Mounting to Withstand Vibration and Shock
In order to withstand vibration and shock tests, it must be ensured that the underside and the kinks are in good contact with the
printed-circuit board.
•For pitches ≤ 15 mm capacitors shall be mechanically fixed by the leads
•For larger pitches the capacitors shall be mounted in the same way and the body clamped
SOLDERING CONDITIONS
For general soldering conditions and wave soldering profile, we refer to the application note:
“Soldering Guidelines for Film Capacitors”: www.vishay.com/doc?28171
Storage Temperature
•Storage temperature: Tstg = - 25 °C to + 40 °C with RH maximum 80 % without condensation
Ratings and Characteristics Reference Conditions
Unless otherwise specified, all electrical values apply to an ambient free air temperature of 23 °C ± 1 °C, an atmospheric pressure
of 86 kPa to 106 kPa and a relative humidity of 50 % ± 2 %.
For reference testing, a conditioning period shall be applied over 96 h ± 4 h by heating the products in a circulating air oven at
the rated temperature and a relative humidity not exceeding 20 %.
MKT365, MKT366, MKT367
Vishay BCcomponents DC Film Capacitors
MKT Radial Lacquered Type
www.vishay.com For technical questions, contact: dc-film@vishay.com Document Number: 28102
40 Revision: 22-Dec-10
CHARACTERISTICS
Capacitance as a function of frequency (typical curve) Capacitance as a function of ambient temperature (typical curve)
Impedance as a function of frequency (typical curve) Max. DC and AC voltage as a function of temperature
Max. RMS voltage as a function of frequency Max. RMS voltage as a function of frequency
Δ
C/C
(%)
2
0
- 1
- 2
- 3
1
f (Hz)
10
2103104105
typical
1 kHz
- 60
C/C
(%)
6
2
0
- 2
- 4
- 6
4
- 20 20 60 100T
amb
(°C)
min.
max.
f (Hz)
102
100
10-1
10-2
10-3
63 V; 100 nF
63 V; 1 µF
Impedance
(1/2)
104106
105107108
1.2
1.0
0.8
0.6
0.4
0.2
0.0
- 60 - 20 20 60 100
Tamb (°C)
Factor
f (Hz)
102
101
100
103
102
101104105
47 nF
220 nF
470 nF
Tamb ≤ 85 C, 63 VDC
AC Voltage
(V)
f (Hz)
102
101
100
103
102
101104105
AC Voltage
(V)
85 °C < T
amb
105 °C, 63
VDC
47 nF
220 nF
470 nF
Document Number: 28102 For technical questions, contact: dc-film@vishay.com www.vishay.com
Revision: 22-Dec-10 41
MKT365, MKT366, MKT367
DC Film Capacitors
MKT Radial Lacquered Type Vishay BCcomponents
Max. RMS voltage as a function of frequency Max. RMS voltage as a function of frequency
Max. RMS voltage as a function of frequency Max. RMS voltage as a function of frequency
Max. RMS voltage as a function of frequency Max. RMS voltage as a function of frequency
f (Hz)
102
101
100
103
102
101104105
AC Voltage
(V)
47 nF
100 nF
470 nF
10 nF
Tamb ≤ 85 C, 100 VDC
f (Hz)
102
101
100
103
102
101104105
AC Voltage
(V)
47 nF
100 nF
470 nF
85 °C < T
amb
105 °C, 100
VDC
10 nF
f (Hz)
102
101
100
103
10
3
10
2
10
1
10
4
10
5
AC Voltage
(V)
18 nF
47 nF
100 nF
150 nF
Tamb ≤ 85 °C, 250 VDC
f (Hz)
102
101
100
103
10
3
10
2
10
1
10
4
10
5
AC Voltage
(V)
85 °C < Tamb ≤ 105 °C, 250 VDC
18 nF
47 nF
100 nF
150 nF
f (Hz)
102
101
100
103
10
3
10
2
10
1
10
4
10
5
AC Voltage
(V)
Tamb ≤ 85 °C, 400 VDC
3.3 nF
15 nF
33 nF
56 nF
f (Hz)
102
101
100
103
10
3
10
2
10
1
10
4
10
5
AC Voltage
(V)
3.3 nF
15 nF
33 nF
56 nF
85 °C < Tamb ≤ 105 °C, 400 VDC
MKT365, MKT366, MKT367
Vishay BCcomponents DC Film Capacitors
MKT Radial Lacquered Type
www.vishay.com For technical questions, contact: dc-film@vishay.com Document Number: 28102
42 Revision: 22-Dec-10
MAXIMUM RMS CURRENT (SINEWAVE) AS A FUNCTION OF FREQUENCY
The maximum RMS current is defined by IAC = ω x C x UAC
UAC is the maximum AC voltage depending on the ambient temperature in the curves “Max. RMS voltage and AC current as a
function of frequency”.
HEAT CONDUCTIVITY (G) AS A FUNCTION OF (ORIGINAL) PITCH AND CAPACITOR BODY
THICKNESS IN mW/°C
Tangent of loss angle as a function of frequency Insulation resistance as a function of the ambient
temperature (typical curve)
Maximum allowed component temperature rise (ΔT)
as a function of the ambient temperature (Tamb)
WMAX.
(mm) HEAT CONDUCTIVITY (mW/°C)
3.5 3.0
4.0 3.5
4.5 3.5
5.0 4.0
5.5 4.0
6.0 4.5
6.5 5.0
f (Hz)
102103104105
103
102
101
Dissipation factor
(x 10-4)
Curve 1: C = 0.33 µF
Curve 2: 0.33 µF, C = 1.2 µF
Curve 3: 1.2 µF, C = 3.9 µF
Curve 4: 3.9 µF, C = 6.8 µF
Curve 5: C = 6.8 µF
5
4
3
2
1
T
amb
(°C)
105
104
102
103
- 50 0 50 100
RC (s)
Document Number: 28102 For technical questions, contact: dc-film@vishay.com www.vishay.com
Revision: 22-Dec-10 43
MKT365, MKT366, MKT367
DC Film Capacitors
MKT Radial Lacquered Type Vishay BCcomponents
POWER DISSIPATION AND MAXIMUM COMPONENT TEMPERATURE RISE
The power dissipation must be limited in order not to exceed the maximum allowed component temperature rise as a function of
the free ambient temperature.
The power dissipation can be calculated according type detail specification “HQN-384-01/101: Technical Information Film
Capacitors”.
The component temperature rise (ΔT) can be measured (see section “Measuring the Component Temperature” for more details)
or calculated by ΔT = P/G:
• ΔT = Component temperature rise (°C)
• P = Power dissipation of the component (mW)
• G = Heat conductivity of the component (mW/°C)
MEASURING THE COMPONENT TEMPERATURE
A thermocouple must be attached to the capacitor body as in:
The temperature is measured in unloaded (Tamb) and maximum loaded condition (TC).
The temperature rise is given by ΔT = TC - Tamb.
To avoid radiation or convection, the capacitor should be tested in a wind-free box.
APPLICATION NOTE AND LIMITING CONDITIONS
These capacitors are not suitable for mains applications as across-the-line capacitors without additional protection, as described
hereunder. These mains applications are strictly regulated in safety standards and therefore electromagnetic interference
suppression capacitors conforming the standards must be used.
To select the capacitor for a certain application, the following conditions must be checked:
1. For capacitors connected in parallel, normally the proof voltage and possibly te rated voltage must be reduced. For
information depending of the capacitance value and the number of parallel connections contact: dc-film@vishay.com
2. The peak voltage (UP) shall not be greater than the rated DC voltage (URDC)
3. The peak-to-peak voltage (UP-P) shall not be greater than 2√2 x URAC to avoid the ionisation inception level
4. The voltage pulse slope (dU/dt) shall not exceed the rated voltage pulse slope in an RC-circuit at rated voltage and without
ringing. If the pulse voltage is lower than the rated DC voltage, the rated voltage pulse slope may be multiplied by URDC and
divided by the applied voltage.
For all other pulses following equation must be fulfilled:
T is the pulse duration.
The rated voltage pulse slope is valid for ambient temperatures up to 85 °C. For higher temperatures a derating factor of 3 %
per K shall be applied.
Thermocouple
2dU
dt
--------


2
0
T
dt URdc
dU
dt
--------


rated
×<××
MKT365, MKT366, MKT367
Vishay BCcomponents DC Film Capacitors
MKT Radial Lacquered Type
www.vishay.com For technical questions, contact: dc-film@vishay.com Document Number: 28102
44 Revision: 22-Dec-10
5. The maximum component surface temperature rise must be lower than the limits (see graph “Max. allowed component
temperature rise”).
6. Since in circuits used at voltages over 280 V peak-to-peak the risk for an intrinsically active flammability after a capacitor
breakdown (short circuit) increases, it is recommended that the power to the component is limited to 100 times the values
mentioned in the table: “Heat Conductivity”
7. When using these capacitors as across-the-line capacitor in the input filter for mains applications or as series connected with
an impedance to the mains the applicant must guarantee that the following conditions are fulfilled in any case (spikes and
surge voltages from the mains included).
VOLTAGE CONDITIONS FOR 6 ABOVE
EXAMPLE
C = 330 nF - 63 V used for the voltage signal shown in next drawing.
UP-P = 40 V; UP = 35 V; T1 = 100 µs; T2 = 200 µs
The ambient temperature is 35 °C
Checking conditions:
1. The peak voltage UP = 35 V is lower than 63 VDC
2. The peak-to-peak voltage 40 V is lower than 2√2 x 40 VAC = 113 UP-P
3. The voltage pulse slope (dU/dt) = 40 V/100 µs = 0.4 V/µs
This is lower than 110 V/µs (see specific reference data for each version)
4. The dissipated power is 16.2 mW as calculated with fourier terms
The temperature rise for Wmax. = 4.5 mm and pitch = 5 mm will be 16.2 mW/2.5 mW/°C = 6.5 °C
This is lower than 15 °C temperature rise at 35 °C, according figure “Max. allowed component temperature rise”
5. Not applicable
6. Not applicable
Voltage Signal
ALLOWED VOLTAGES Tamb ≤ 85 °C 85 °C < Tamb ≤ 105 °C
Maximum continuous RMS voltage URAC 0.8 x URAC
Maximum temperature RMS-overvoltage (< 24 h) 1.25 x URAC URAC
Maximum peak voltage (VO-P) (< 2 s) 1.6 x URDC 1.3 x URDC
Voltage
UP
Time
UP-P
T1
T2
Document Number: 28102 For technical questions, contact: dc-film@vishay.com www.vishay.com
Revision: 22-Dec-10 45
MKT365, MKT366, MKT367
DC Film Capacitors
MKT Radial Lacquered Type Vishay BCcomponents
INSPECTION REQUIREMENTS
General Notes:
1. Sub-clause numbers of tests and performance requirements refer to the “Sectional Specification, Publication IEC 60384-2 and
Specific Reference Data”.
Group C Inspection Requirements
SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS
SUB-GROUP C1A PART OF SAMPLE
OF SUB-GROUP C1
4.1 Dimensions (detail) As specified in chapters “General Data” of
this specification
4.3.1 Initial measurements Capacitance
Tangent of loss angle:
For C ≤ 470 nF at 100 kHz or
for C > 470 nF at 10 kHz
4.3 Robustness of terminations Tensile: Load 10 N; 10 s
Bending: Load 5 N; 4 x 90°
No visible damage
4.4 Resistance to soldering heat Method: 1A
Solder bath: 280 °C ± 5 °C
Duration: 10 s
4.14 Component solvent resistance Isopropylalcohol at room temperature
Method: 2
Immersion time: 5 min ± 0.5 min
Recovery time: Min. 1 h, max. 2 h
4.4.2 Final measurements Visual examination No visible damage
Legible marking
Capacitance |ΔC/C| ≤ 2 % of the value measured initially
Tangent of loss angle Increase of tan δ
≤ 0.005 for: C ≤ 100 nF or
≤ 0.010 for: 100 nF < C ≤ 220 nF or
≤ 0.015 for: 220 nF < C ≤ 470 nF and
≤ 0.003 for: C > 470 nF
Compared to values measured in 4.3.1
SUB-GROUP C1B PART OF SAMPLE
OF SUB-GROUP C1
4.6.1 Initial measurements Capacitance
Tangent of loss angle:
For C ≤ 470 nF at 100 kHz or
for C > 470 nF at 10 kHz
No visible damage
4.6 Rapid change of temperature θA = - 55 °C
θB = + 105 °C
5 cycles
Duration t = 30 min
4.7 Vibration Visual examination
Mounting:
See section “Mounting” of this specification
Procedure B4
Frequency range: 10 Hz to 55 Hz
Amplitude: 0.75 mm or
Acceleration 98 m/s²
(whichever is less severe)
Total duration 6 h
No visible damage
4.7.2 Final inspection Visual examination No visible damage
MKT365, MKT366, MKT367
Vishay BCcomponents DC Film Capacitors
MKT Radial Lacquered Type
www.vishay.com For technical questions, contact: dc-film@vishay.com Document Number: 28102
46 Revision: 22-Dec-10
4.9 Shock Mounting:
See section “Mounting” of this specification
Pulse shape: Half sine
Acceleration: 490 m/s²
Duration of pulse: 11 ms
4.9.3 Final measurements Visual examination No visible damage
Capacitance |ΔC/C| ≤ 3 % of the value measured in 4.6.1
Tangent of loss angle Increase of tan δ
≤ 0.005 for: C ≤ 100 nF or
≤ 0.010 for: 100 nF < C ≤ 220 nF or
≤ 0.015 for: 220 nF < C ≤ 470 nF and
≤ 0.003 for: C > 470 nF
Compared to values measured in 4.6.1
Insulation resistance As specified in section “Insulation
Resistance” of this specification
SUB-GROUP C1 COMBINED SAMPLE
OF SPECIMENS OF SUB-GROUPS
C1A AND C1B
4.10 Climatic sequence
4.10.2 Dry heat Temperature: + 105 °C
Duration: 16 h
4.10.3 Damp heat cyclic
Test Db, first cycle
4.10.4 Cold Temperature: - 55 °C
Duration: 2 h
4.10.6 Damp heat cyclic
Test Db, remaining cycles
4.10.6.2 Final measurements Voltage proof = URDC for 1 min within 15 min
after removal from test chamber
No breakdown of flash-over
Visual examination No visible damage
Legible marking
Capacitance |ΔC/C| ≤ 5 % of the value measured in
4.4.2 or 4.9.3
Tangent of loss angle Increase of tan δ
≤ 0.007 for: C ≤ 100 nF or
≤ 0.010 for: 100 nF < C ≤ 220 nF or
≤ 0.015 for: 220 nF < C ≤ 470 nF and
≤ 0.005 for: C > 470 nF
Compared to values measured in
4.3.1 or 4.6.1
Insulation resistance ≥ 50 % of values specified in section
“Insulation Resistance” of this specification
SUB-GROUP C2
4.11 Damp heat steady state 56 days, 40 °C, 90 % to 95 % RH
4.11.1 Initial measurements Capacitance
Tangent of loss angle at 1 kHz
4.11.3 Final measurements Voltage proof = URDC for 1 min within 15 min
after removal from test chamber
No breakdown of flash-over
Visual examination No visible damage
Legible marking
Capacitance |ΔC/C| ≤ 5 % of the value measured in
4.11.1.
Tangent of loss angle Increase of tan δ ≤ 0.005
Compared to values measured in 4.11.1
Insulation resistance ≥ 50 % of values specified in section
“Insulation Resistance” of this specification
SUB GROUP C3
4.12 Endurance Duration: 2000 h
1.25 x URDC at 85 °C
1.0 x URDC at 105 °C
SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS
Document Number: 28102 For technical questions, contact: dc-film@vishay.com www.vishay.com
Revision: 22-Dec-10 47
MKT365, MKT366, MKT367
DC Film Capacitors
MKT Radial Lacquered Type Vishay BCcomponents
4.12.1 Initial measurements Capacitance
Tangent of loss angle:
For C ≤ 470 nF at 100 kHz or
for C > 470 nF at 10 kHz
4.12.5 Final measurements Visual examination No visible damage
Legible marking
Capacitance |ΔC/C| ≤ 5 % compared to values measured
in 4.12.1
Tangent of loss angle Increase of tan δ
≤ 0.005 for: C ≤ 100 nF or
≤ 0.010 for: 100 nF < C ≤ 220 nF or
≤ 0.015 for: 220 nF < C ≤ 470 nF and
≤ 0.003 for: C > 470 nF
Compared to values measured in 4.12.1
Insulation resistance ≥ 50 % of values specified in section
“Insulation Resistance” of this specification
SUB-GROUP C4
4.13 Charge and discharge 10 000 cycles
Charged to UR VDC
Discharge resistance:
4.13.1 Initial measurements Capacitance
Tangent of loss angle:
For C ≤ 470 nF at 100 kHz or
for C > 470 nF at 10 kHz
4.13.3 Final measurements Capacitance |ΔC/C| ≤ 3 % compared to values measured
in 4.13.1
Tangent of loss angle Increase of tan δ
≤ 0.005 for: C ≤ 100 nF or
≤ 0.010 for: 100 nF < C ≤ 220 nF or
≤ 0.015 for: 220 nF < C ≤ 470 nF and
≤ 0.003 for: C > 470 nF
Compared to values measured in 4.13.1
Insulation resistance ≥ 50 % of values specified in section
“Insulation Resistance” of this specification
SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS
RUR
C 2.5 dU dt⁄()
R
××
--------------------------------------------------
=
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 12-Mar-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.