Schottky Barrier Rectifier MBR10200CT 2x 5A, 200V, TO-220AB Common Cathode MBR10200CT RoHS Pb Description Littelfuse MBR series Schottky Barrier Rectifier is designed to meet the general requirements of commercial applications by providing high temperature, low leakage and low VF products. It is suitable for high frequency switching mode power supply, free-wheeling diodes and polarity protection diodes. Features * H igh junction temperature capability Pin out Heat sink * G uard ring for enhanced ruggedness and long term reliability Heat sink Common Cathode Common Cathode * High frequency operation * C ommon cathode configuration in TO-220AB package * Low forward voltage drop Applications 1 Anode 3 1 2 * Switching mode power 3 supply Anode Common Anode Cathode * Free-wheeling diodes 3 1 Anode Common Anode Cathode Anode Pinout 1 D2-PAK & D-PAK Common Cathode Pinout 2 TO-220AB Common Cathode Peak Inverse Voltage Average Forward Cathode Common Cathode Current Anode * Polarity protection diodes Pinout 3 ITO-220AB Common Cathode Maximum Ratings Parameters * DC/DC converters 2 Symbol Heat sink V RWM Cathode IF(AV) Peak 2 One3Cycle Non-Repetitive SurgeCathode IFSM Anode Current (per leg) 1 2 Pinout 4 ITO-220AB Pinout 5 Common Anode TO-220AC 1 Test Conditions Max Unit V - 200 50% duty cycle @TC =105C rectangular wave form 5 (Per leg) 10 (Per device) 8.3 ms, half Sine pulse 128 A A Electrical Characteristics Parameters Forward Voltage Drop (per leg) * Reverse Current (per leg) * Symbol Test Conditions Max VF1 @5A, Pulse, TJ = 25 C 0.98 VF2 @5A, Pulse, TJ = 125 C 0.78 IR1 @VR = rated VR TJ = 25 C 1.0 IR2 @VR = rated VR TJ = 125 C 7.0 Unit V mA Junction Capacitance (per leg) CT @VR = 5V, TC = 25 C fSIG = 1MHz 150 pF Series Inductance (per leg) LS Measured lead to lead 5 mm from package body 8.0 nH 10,000 V/s Voltage Rate of Change * Pulse Width < 300s, Duty Cycle <2% dv/dt (c)2015 Littelfuse, Inc Specifications are subject to change without notice. Revised:01/19/16 Schottky Barrier Rectifier MBR10200CT 2x 5A, 200V, TO-220AB Common Cathode Thermal-Mechanical Specifications Parameters Symbol Junction Temperature Range TJ Storage Temperature Range Tstg Test Conditions Unit C -55 to +150 C 3.5 (Per leg) Maximum Thermal Resistance Junction to Case RthJC DC operation Maximum Thermal Resistance, Case to Heat Sink RthCS Mounting surface, smooth and greased(only for TO-220) Approximate Weight wt Case Style Max -55 to +150 1.75 (Per device) C/W 0.5 C/W 2 g TO-220AB Figure 1: Typical Forward Characteristics Figure 2: Typical Reverse Characteristics C C C C Figure 3: Typical Junction Capacitance C (c)2015 Littelfuse, Inc Specifications are subject to change without notice. Revised:01/19/16 Schottky Barrier Rectifier MBR10200CT 2x 5A, 200V, TO-220AB Common Cathode Dimensions- TO-220AB Millimeters Symbol Min Max A 3.56 4.83 A1 0.51 1.40 A2 2.03 2.92 b 0.38 1.02 b1 1.14 1.78 c 0.31* 0.61 D 14.22 16.51 D1 8.38 9.15* E 9.65 10.67 e 2.54 - e1 4.98* - H1 5.84 6.86 L 12.70 14.73 L1 - 6.35 oP 3.53 4.09 Q 2.54 3.43 Footnote *: The spec. does not comply with JEDEC spec. Packing Options Part Numbering and Marking System Part Number Marking Packing Mode M.O.Q MBR10200CT MBR10200CT 50pcs / Tube 1000 Tube Specification 7mm 530mm MBR10200CT 6 LF YYWWL MBR 10 200 CT LF YY WW L = Device Type = Forward Current (10A) = Reverse Voltage (200V) = Configuration = Littelfuse = Year = Week = Lot Number 32mm (c)2015 Littelfuse, Inc Specifications are subject to change without notice. Revised:01/19/16