High Power Resistors Type ES Series Type ES Series Characteristics Electrical The ES is a new wirewound resistor from Tyco manufactured to stringent quality control requirements and is an Resistance Values: R10 - 3K3 (Other values by agreement/see wattage table below) Selection Tolerance: 5 % (Other tolerances by agreement) Rated Dissipation @ 20C: See Table Below Dielectric Strength: 500V AC Insulation Resistance: 1000 M Short Term Overload Power: 5 times overload 5 seconds Terminal Strength: 5lb pull Test Solderability: Meets MIL - STD - 202 Maximum Operating Temperature: 200C Temperature Coefficient of Resistance: 300ppmC economy sister to the well known Tyco ER Series. Whilst very slightly larger than the ER and manufactured to a Dimensions L marginally different specification, the ES is suited to volume requirements in power supplies, process control instruments, communication equipment, and other industrial positions. In d D addition to the ES we offer the practability of a wirewound resistor down to 9.0mm. x 3.00 mm., body size. D1.0 L1.5 l3.0 d0.05 Resistance Range 1/2W 1W 2W 3W 3WY 5W 6W 7W 8W 10W 3.0 4.0 5.0 5.5 6.0 6.5 8.5 8.5 8.5 8.5 9.0 9.0 11.0 13.0 17.0 20.0 25.0 32.0 41.0 53.0 30.0 30.0 30.0 38.0 38.0 38.0 38.0 38.0 38.0 33.0 0.65 0.65 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 R05-68R R05-100R R05-150R R05-200R 201R-470R R10-390R R10-1K0 R10-1K5 R10-2K2 R10-3K3 Key Features High Power to Size Ratio Entirely Welded Construction 0.5 Watt to 10 Watt Sizes Insulation Resistance >1000M Completely Flameproof Temperature Coefficient 300 ppm All Product Bandoliered Dimensions Type ES @ 20C Surface Temperature Vs Power 100 250 80 200 Temperature (C) % Power Resistance Value Marking Dielectric Withstand Voltage 350V 500V 500V 500V 500V 500V 500V 500V 800V 1000V 60 40 20 150 100 50 0 0 30 60 90 120 150 180 210 240 275 0 0 0.5 1.0 Temperature (C) 1.5 2.0 2.5 3.0 Power (W) How to Order Literature No. 1773213 Issued: 05-06 ES2W R10 J Common Part Resistance Value Tolerance ES05W - 1/2W ES1W - 1W 0.1 ohm (100 milliohms) R10 ES2W - 2W ES3W - 3W ES3WY - 3W ES5W - 5W ES6W - 6W ES7W - 7W ES8W - 8W ES10W - 10W Dimensions are shown for reference purposes only. 1 ohm (1000 milliohms) 1R0 J - 5% 1K ohm (1000 ohms) 1K0 Dimensions are in millimetres unless otherwise specified. Specifications subject to change. www.tycoelectronics.com passives.tycoelectronics.com