D55342/07 Thick Film Chip Resistor 1206 Size, Surface Mount, Solderable FEATURES GLASS PASSIVATION RESISTOR FILM 96% ALUMINA CHIP WRAPAROUND TERMINATIONS PRETINNED * Tolerances to 1% * Operating temperature range : -55 C to +150 C * Pretinned (Sn60) nickel barrier terminations * TCR's to 100 ppm * "S" level qualified manufacturer * Suitable for solder reflow, vapor phase, or wave solder attachment PERFORMANCE CHARACTERISTICS Resistance Range Tolerances Maximum Power Maximum Voltage 5.6W - 5.62MW 1%, 2%, 5% 10% 250 mW 100 Volts CURRENT NOISE POWER DISSIPATION ENVIRONMENTAL PERFORMANCE (1) TCR (-55 to +125 C in ppm/C) Thermal Shock Low Temperature Operation Short-time Overload Resistance to Bonding Exposure Moisture Resistance High Temperature Exposure Life < 100 ppm 0.03% 0.02% 0.02% 0.03% 0.05% 0.05% See Chart TYPICAL LIFE TEST PERFORMANCE POWER DERATING (1) Typical resistance change, the maximum is the same as MIL-PRF-55342. Test methods are per MIL-PRF-55342. Solderability: Solder coating compatible with Sn60, 62 or 63 solders, provides good wetting with all types of solder attachment. All product is tested IAW Mil-Std-202, method 208, including 8 hour steam aging. MECHANICAL PART NUMBERING D55342 K 07B 100D S PRODUCT LEVEL DESIGNATOR* M: 1% per 1000 hrs. R: 0.01% per 1000 hrs. P: 0.1% per 1000 hrs S: 0.001% per 1000 hrs. C: Non - ER T: Space Level RESISTANCE AND TOLERANCE CODE Three significant digits, with a letter indicating the decimal location, and the tolerance, and the value range (W,KW,MW) D: 1% W G: 2% W J: 5% W M: 10% W E: 1%K W H: 2%K W K: 5%K W N: 10%K W F: 1%M W T: 2%M W L: 5%M W P: 10%M W TCR K: 100 ppm M: 300 ppm Length Width Thickness Top Term. Bottom Term. INCHES .126 (+.008/-.008) .063 (.005) .015 - .033 .010 - .025 .010 - .025 MM 3.20 (+.20/-.20) 1.60 (.13) .38 - .84 .25 - .64 .25 - .64 Approx. Weight .0087 grams PACKAGING Two packaging options are available: Waffle Pack - (140 per Tray Max.) Tape & Reel - (5000 per 8" Inch Reel Max.) * PRODUCT LEVELS OPTIONS All product levels are based on the same design as our "S" level failure rate Established Reliability part. Level C is a Non-Established Reliability part requiring no group A, B or C testing. Established Reliability (failure rates based on life testing) product levels M,P,R and S are subject to group A, B and C testing per MIL-PRF-55342. Space product level T requires group A and B tests including 100% power conditioning. Termination type C & U (epoxy bondable), wraparound style, and type W (wire bondable) are available. Also available in thin film MIL-PRF-55342 characteristic E & H. SOTA offers a full line of component parts in the 1206 size including Standard Grade, High-Reliability (customer specified testing), and zeroohm jumpers. Custom part marking is available. STATE OF THE ART, INC. 2470 Fox Hill Road, State College, PA 16803-1797 Phone (814) 355-8004 Fax (814) 355-2714 Toll Free 1-800-458-2714 Where Quality Isn't a Goal...It's Our Tradition 05/17/99