DATA SHEET LOW OHMIC CHIP RESISTORS RL series 5%, 2%, 1% sizes 0402/0603/0805/1206/ 1210/1218/2010/2512 Product specification - June 01, 2017 V.2 RoHS compliant & Halogen Free Product specification Chip Resistor Surface Mount RL SCOPE ORDERING INFORMATION - GLOBAL PART NUMBER & 12NC This specification describes RL0402 to RL2512 low ohmic chip resistors with lead-free terminations made by thick film process. Both part numbers are identified by the series, size, tolerance, packing type, temperature coefficient, taping reel and resistance value. APPLICATIONS Converters RL XXXX X X X XX XXXX L YAGEO BRAND ordering code GLOBAL PART NUMBER (PREFERRED ) (1) Printer equipment Server board Telecom Consumer F = 1% Car electronics G = 2% Halogen Free Epoxy RoHS compliant Hazardous wastes High component and equipment reliability Saving of PCB space Non-forbidden materials used in products/production Low resistances applied to current sensing MSL Class: MSL 1 (2) (3) (4) (5) (6) (7) (1) SIZE FEATURES AEC-Q200 qualified 2 9 0402 to 2512 SERIES 0402 / 0603 / 0805 / 1206 / 1210 / 1218 / 2010 / 2512 (2) TOLERANCE J = 5% "-" = Jumper ordering (3) PACKAGING TYPE R = Paper taping reel K = Embossed taping reel (4) TEMPERATURE COEFFICIENT OF RESISTANCE - = Based on spec (5) TAPING REEL 07 = 7 inch dia. Reel and standard power 10 = 10 inch dia. Reel and standard power 13 = 13 inch dia. Reel and standard power 7W = 7 inch dia. Reel and 2 x standard power (0805 and 1206) (6) RESISTANCE VALUE There are 2~4 digits indicated the resistor value. Letter R/K/M is decimal point. Detailed coding rules of resistance are shown in the table of "Resistance rule of global part number". (7) DEFAULT CODE Letter L is system default code for order only (Note) Resistance rule of global part number Resistance code rule Example 0RXXX (1 to 976 m) XRXX (1 to 9.76 ) 0R1 = 0.1 0R12 = 0.12 0R105 = 0.105 1R = 1 1R5 = 1.5 9R76 = 9.76 XXRX (10 to 97.6 ) 10R = 10 97R6 = 97.6 XXXR (100 to 976 ) 100R = 100 XKXX (1 to 9.76 K) 1K = 1,000 9K76 = 9760 XMXX (1 to 9.76 M) 1M = 1,000,000 9M76= 9,760,000 O RDERING EXAMPLE The ordering code of a RL0603 chip resistor, value 0.56 with 1% tolerance, supplied in 7-inch tape reel is: RL0603FR-070R56L. NOTE 1. All our R-Chip products meet RoHS compliant and Halogen Free. "LFP" of the internal 2D reel label mentions "Lead Free Process" 2. On customized label, "LFP" or specific symbol can be printed www.yageo.com Jun. 01, 2017 V.2 Product specification Chip Resistor Surface Mount RL SERIES 3 9 0402 to 2512 PHYCOMP BRAND ordering codes Both GLOBAL PART NUMBER (preferred) and 12NC (traditional) codes are acceptable to order Phycomp brand products. GLOBAL PART NUMBER (PREFERRED ) For detailed information of GLOBAL PART NUMBER and ordering example, please refer to page 2. 12NC CODE 2350 / 2390 / 2322 (1) SIZE TYPE Last digit of 12NC XXX XXXXX L (2) (3) (4) START TOL. RESISTANCE IN (1) (%) RANGE Resistance decade (3) EMBOSSED (2) PAPER/PE (2) TAPE ON REEL TAPE ON REEL (units) 4,000 5,000 10,000 Last digit 0.01 to 0.0976 0 0.1 to 0.976 7 0402 LRC31 5% 0.05 to 1 1 to 9.76 2350 - - 513 20xxx 8 LRC32 1% 0.05 to 1 10 to 97.6 2350 - - 513 22xxx 9 0603 LRC21 2350 5% 0.01 to 1 100 to 976 - 512 10xxx - 1 LRC22 2350 1% 0.01 to 1 1 to 9.76 k - 512 12xxx - 2 0805 LRC11 5% 0.01 to 1 10 to 97.6 k 2350 - 511 10xxx - 3 LRC12 1% 0.01 to 1 100 to 976 k 2350 - 511 12xxx - 4 LRC11P 2350 1% 0.01 to 1 1 to 9.76 M - 511 15xxx - 5 LRC12P 2350 5% 0.01 to 1 10 to 97.6 M - 511 17xxx - 6 Example: 0.02 = 0200 or 200 0.3 = 3007 or 307 1 = 1008 or 108 33 k = 3303 or 333 10 M = 1006 or 106 1206 LRC01 2350 5% 0.01 to 1 - 510 10xxx - LRC02 2350 1% 0.01 to 1 - 510 12xxx - LRC01P 2350 1% 0.01 to 1 - 519 01xxx - LRC02P 2350 5% 0.01 to 1 - 519 1xxxx - 5% 0.01 to 0.0976 - 735 90xxx - LPRC101 2390 5% 0.1 to 1 - 735 60xxx - O RDERING EXAMPLE LPRC102 2390 1% 0.01 to 1 - 735 3xxxx - The ordering code of a RL0603 chip 1218 LPRC201 2322 5% 0.01 to 1 735 64xxx - - LPRC201 2322 1% 0.01 to 1 resistor, value 0.56 with 1% tolerance, supplied in tape of 5,000 units per reel is: 235051212567L or RL0603FR-070R56L. 1210 LPRC101 2390 735 7xxxx - - 5% 0.01 to 0.0976 760 90xxx - - LPRC111 2322 5% 0.1 to 1 760 60xxx - - LPRC111 2322 1% 0.01 to 0.0976 761 90xxx - - NOTE LPRC111 2322 1% 0.1 to 1 761 6xxxx - - 5% 0.01 to 0.0976 762 90xxx - - LPRC221 2322 5% 0.1 to 1 762 60xxx - - 1. All our R-Chip products meet RoHS compliant and Halogen Free. "LFP" of the internal 2D reel label mentions "Lead Free Process" LPRC221 2322 1% 0.01 to 0.0976 763 90xxx - - LPRC221 2322 1% 0.1 to 1 - - 2010 LPRC111 2322 2512 LPRC221 2322 763 6xxxx 2. On customized label, "LFP" or specific symbol can be printed (1) The resistors have a 12-digit ordering code starting with 2350/2390/2322. (2) The subsequent 4 or 5 digits indicate the resistor tolerance and packaging. (In 12NC code, only 07'' tape reel code is supplied. Supply of 10''/13'' tape reel is requested in Global part number ordering code.) (3) The remaining 4 or 3 digits represent the resistance value with the last digit indicating the multiplier as shown in the table of "Last digit of 12NC". (4) Letter L is system default code for order only (Note) . www.yageo.com Jun. 01, 2017 V.2 Product specification Chip Resistor Surface Mount RL SERIES 0402 to 2512 4 9 MARKING RL0402 / RL0603: R<100 m EXCEPT 10/20/30/40/50/60 m No marking Fig. 1 RL0603: R100 m, R = 10/20/30/40/50/60 m E-24 series / Non-E series (R= 25/40/50/60/250/400/500 m):3 digits Fig. 2 Value = 220 m The "R" is used as a decimal point; the other 2 digits are significant. RL0805 / RL1206 / RL1210 /RL1218 / RL2010 / RL2512 E-24 series / Non-E series (R= 25/40/50/60/250/400/500 m): 4 digits Fig. 3 Value = 20 m The "R" is used as a decimal point; the other 3 digits are significant. For further marking information, please see special data sheet "Chip resistors marking". CONSTRUCTION The resistors are constructed out of a high-grade ceramic body. Internal metal electrodes are added at each end and connected by a resistive paste. The composition of the paste is adjusted to give the approximate required resistance and laser cutting of this resistive layer that achieves tolerance trims the value. The resistive layer is covered with a protective coat and printed with the resistance value. Finally, the two external terminations (matte tin) are added. See fig. 4. OUTLINES For dimension see Table 1 DIMENSIONS Table 1 For outlines see fig. 4 TYPE L (mm) W (mm) H (mm) I1 (mm) I2 (mm) RL0402 1.00 0.10 0.50 0.05 0.35 0.05 0.20 0.10 0.25 0.10 RL0603 1.60 0.10 0.80 0.10 0.45 0.10 0.25 0.15 0.25 0.15 RL0805 2.00 0.10 1.25 0.10 0.50 0.10 0.35 0.20 0.35 0.20 RL1206 3.10 0.10 1.60 0.10 0.55 0.10 0.45 0.20 0.40 0.20 RL1210 3.10 0.10 2.60 0.15 0.55 0.10 0.50 0.20 0.50 0.20 Fig. 4 Chip resistor outlines RL1218 3.05 0.15 4.60 0.20 0.55 0.10 0.45 0.25 0.50 0.25 RL2010 5.00 0.10 2.50 0.15 0.55 0.10 0.60 0.20 0.50 0.20 RL2512 6.35 0.10 3.20 0.15 0.55 0.10 0.60 0.20 0.50 0.20 www.yageo.com Jun. 01, 2017 V.2 Product specification Chip Resistor Surface Mount RL 5 9 0402 to 2512 SERIES ELECTRICAL CHARACTERISTICS Table 2 Type Power P70 RL0402 1/16W RL0603 1/10W RL0805 RL1206 Operating Temp. range T. C. R. ( ppm/C) Resistance range & tolerance Max. resistance Rated current Max. resistance Rated current Max. resistance Rated current 50m R < 1 -55C to +155C 10m R < 1 10m R < 1 1/8W 1/4W -55C to +125C 10m R < 1 1/4W -55C to +155C 10m R < 1 1/2W -55C to +125C E24 1%, 2%, 5% Jumper criteria 20m 1.5A 20m 2A 20m 2.5A -See following table "T.C.R.- RL series" 10m R < 1 -- Max. resistance 20m Rated current 3.5A -- -- 10m R < 1 -- -- 10m R < 1 -- -- RL1210 1/2W RL1218 1W RL2010 3/4W 10m R < 1 -- -- RL2512 1W 10m R < 1 -- -- -55C to +155C TYPE / RESISTANCE RANGE RL0402 50mR<1 RL0603 10mR<1 TEMPERATURE COEFFICIENT OF RESISTANCE 50m R<100m 100m R<500m 500m R<1 1000 ppm/C 800 ppm/C 300 ppm/C 10m R36m 36m <R91m 91m <R500m 500m <R<1 1,500 ppm/C 1,200 ppm/C 800 ppm/C 300 ppm/C 10m R18m 18m <R47m 47m <R91m 1,500 ppm/C 1,200 ppm/C 1,000 ppm/C 10m R18m 18m <R47m 47m <R91m RL1206 10mR<1 1,500 ppm/C 1,200 ppm/C 1,000 ppm/C 600 ppm/C 300 ppm/C 200 ppm/C RL1210 1,500 ppm/C 1,000 ppm/C 800 ppm/C 600 ppm/C 300 ppm/C 200 ppm/C RL2010 1,500 ppm/C 1,200 ppm/C 1,000 ppm/C 600 ppm/C 300 ppm/C 200 ppm/C RL2512 1,500 ppm/C 1,200 ppm/C 800 ppm/C 600 ppm/C 300 ppm/C 200 ppm/C RL0805 RL1218 10mR<1 91m <R360m 360m <R<500m 600 ppm/C 300 ppm/C 500m R<1 200 ppm/C 91m <R360m 360m <R500m 500m <R<1 10m R30m 30m <R56m 56m <R180m 180m <R<1 2,000 ppm/C 1,000 ppm/C 700 ppm/C 250 ppm/C FOOTPRINT AND SOLDERING PROFILES For recommended footprint and soldering profiles, please see the special data sheet "Chip resistors mounting". www.yageo.com Jun. 01, 2017 V.2 Product specification Chip Resistor Surface Mount RL SERIES 6 9 0402 to 2512 PACKING STYLE AND PACKAGING QUANTITY Table 3 Packing style and packaging quantity PACKING STYLE REEL DIMENSION RL0402 RL0603 RL0805 RL1206 RL1210 RL1218 RL2010 RL2512 7" (178 mm) 10,000 5,000 5,000 5,000 5,000 --- --- --- 10" (254 mm) 20,000 10,000 10,000 10,000 10,000 --- --- --- 13" (330 mm) 50,000 20,000 20,000 20,000 20,000 --- --- --- 7" (178 mm) --- --- --- --- --- 4,000 4,000 4,000 Paper taping reel (R) Embossed taping reel (K) NOTE 1. For paper/embossed tape and reel specification/dimensions, please see the special data sheet "Chip resistors packing". FUNCTIONAL DESCRIPTION OPERATINGTEMPERATURE RANGE Normal Power: Range: -55 C to +155 C (Fig. 5) Double Power: Range: -55 C to +125 C (Fig. 6) POWER RATING Each type rated power at 70 C: RL0402=1/16 W; RL0603=1/10 W; RL0805=1/8 W, 1/4W; RL1206=1/4 W, 1/2W; RL1210=1/2 W; RL1218=1 W; RL2010=3/4 W; RL2512=1 W. Fig. 5 Maximum dissipation (P max ) in percentage of rated power as a function of the operating ambient temperature (T amb) R ATED VOLTAGE The DC or AC (rms) continuous working voltage corresponding to the rated power is determined by the following formula: V= (PxR) Where V = Continuous rated DC or AC (rms) working voltage (V) P = Rated power (W) R = Resistance value ( ) Fig. 6 Maximum dissipation (P max ) in percentage of rated power as a function of the operating ambient temperature (T amb) www.yageo.com Jun. 01, 2017 V.2 Product specification Chip Resistor Surface Mount RL SERIES 7 9 0402 to 2512 TESTS AND REQUIREMENTS Table 4 Test condition, procedure and requirements TEST TEST METHOD PROCEDURE REQUIREMENTS Life/ Endurance IEC 60115-1 4.25.1 1,000 hours at 70 2C applied RCWV 1.5 hours on, 0.5 hour off, still air required (2% +0.5m ) High Temperature Exposure IEC 60068-2-2 1,000 hours at maximum operating temperature depending on specification, unpowered (1% +0.5m ) MIL-STD-202 Method 108A No direct impingement of forced air to the parts Normal power : Tolerances: 155 5 Double power : Tolerances: 125 5 Moisture Resistance MIL-STD-202 Method 106G Each temperature / humidity cycle is defined at 8 hours, 3 cycles / 24 hours for 10d with 25 C / 65 C 95% R.H, without steps 7a & 7b, unpowered (2% +0.5m ) Parts mounted on test-boards, without condensation on parts Thermal Shock MIL-STD-202 Method 107G -55/+125 C (1% +0.5m ) Number of cycles required is 300. Devices mounted Maximum transfer time is 20 seconds. Dwell time is 15 minutes. Short time overload IEC60115-1 4.13 RL standard power: 2.5 times rated voltage for 5 sec at room temperature (2% +0.5m ) No visible damage RL high power: 5 times rated power for 5 sec at room temperature Board Flex/ Bending IEC 60115-1 4.33 Device mounted on PCB test board as described, only 1 board bending required (1% +0.5m ) No visible damage 3 mm bending Bending time: 60 5 seconds Ohmic value checked during bending www.yageo.com Jun. 01, 2017 V.2 Product specification Chip Resistor Surface Mount RL SERIES TEST TEST METHOD PROCEDURE REQUIREMENTS Solderability - Wetting J-STD-002 test B Electrical Test not required Well tinned (95% covered) No visible damage Magnification 50X 8 9 0402 to 2512 SMD conditions: 1st step: method B, aging 4 hours at 155 C dry heat 2nd step: leadfree solder bath at 245 3 C Dipping time: 3 0.5 seconds - Leaching J-STD-002 test D Leadfree solder, 260 C, 30 seconds immersion time No visible damage - Resistance to Soldering Heat IEC 60115-1 4.18 Condition B, no pre-heat of samples. (1% +0.5m ) Leadfree solder, 260 C, 10 seconds immersion time No visible damage Procedure 2 for SMD: devices fluxed and cleaned with isopropanol www.yageo.com Jun. 01, 2017 V.2 Product specification Chip Resistor Surface Mount RL SERIES 0402 to 2512 9 9 REVISION HISTORY REVISION DATE CHANGE NOTIFICATION DESCRIPTION Version 2 May 31, 2017 - - Add 10" packing Version 1 Dec. 16, 2015 - - Extend 0805 T.C.R. range Version 0 Nov. 11, 2014 - - First issue of this specification " Yageo reserves all the rights for revising the content of this datasheet without further notification, as long as the products itself are unchanged. Any product change will be announced by PCN." www.yageo.com Jun. 01, 2017 V.2