Multilayer Ceramic Chip Capacitors
DSCC Qualified Type 05006
www.vishay.com For technical questions, contact: mlcc.specials@vishay.com Document Number 45048
60 Revision 06-Mar-07
DSCC 05006
Vishay Vitramon
FEATURES
•Excellent aging characteristics
•Stable BP, BR and BX dielectrics
•
Federal stock control number
CAGE CODE
95275
•Surface-mountable, precious metal, multilayer
ceramic capacitors
•Made with a combination of design, materials
and tight process control to achieve very high
field reliability
•US defense supply center approved
•Case size 0805
•Tin/Lead (“Z” and “U” termination codes) available
ELECTRICAL SPECIFICATIONS
Note: Electrical characteristics at + 25 °C unless otherwise
specified
Operating Temperature: BP, BR, BX: - 55 °C to + 125 °C
Capacitance Range:
BP = 0.5 pF to 3300 pF
BR = 150 pF to 0.1 µF
BX = 150 pF to 0.1 µF
Dissipation Factor (DF):
BP:
0.15 % max. at 1.0 Vrms and 1 MHz for values ≤ 1000 pF
0.15 % max. at 1.0 Vrms and 1 kHz for values > 1000 pF
BR and BX:
≤ 25 V ± 3.5 % max. at 1.0 Vrms and 1 kHz
≥ 50 V ± 2.5 % max. at 1.0 Vrms and 1 kHz
Temperature Coefficient of Capacitance (TCC):
BP = 0 ± 30 ppm/°C from - 55 °C to + 125 °C with zero (0) Vdc applied
BP = 0 ± 30 ppm/°C from - 55 °C to + 125 °C with 100 % rated Vdc applied
BR =
±
15 % from - 55 °C to + 125 °C with zero (0) Vdc applied
BR = + 15 %, - 40 % from - 55 °C to + 125 °C with 100 % rated Vdc applied
BX =
±
15 % from - 55 °C to + 125 °C with zero (0) Vdc applied
BX = + 15 %, - 25 % from - 55 °C to + 125 °C with 100 % rated Vdc applied
Voltage Rating: 10 Vdc to 200 Vdc
Aging Rate:
BP = 0 % maximum per decade
BR, BX = 1 % maximum per decade
Insulation Resistance (IR):
At + 25 °C and rated voltage 100 000 MΩ minimum or
1000 ΩF, whichever is less
At + 125 °C and rated voltage 10 000 MΩ minimum or
100 ΩF, whichever is less
Dielectric Withstanding Voltage (DWV):
This is the maximum voltage the capacitors are tested for
a 1 to 5 second period and the charge/discharge current
does not exceed 50 mA.
≤ 200 Vdc: DWV at 250 % of rated voltage
Notes:
1. DC voltage rating should not be exceeded in application
2. “U” Termination part number code for DSCC product length, width and thickness dimensions positive tolerances (including bandwidth) above
are allowed to increase by the following amounts: Length 0.023 [0.60], Width/Thickness 0.012 [0.30]
* Pb containing terminations are not RoHS compliant, exemptions may apply
DIMENSIONS
PART ORDERING
NUMBER LENGTH WIDTH MAXIMUM
THICKNESS (T)
TERMINATION PAD
MINIMUM MAXIMUM
VJ05006- 0.079 ± 0.008
[2.00 ± 0.20]
0.049 ± 0.008
[1.25 ± 0.20]
0.053
[1.35]
0.010
[0.25]
0.028
[0.71]
ORDERING INFORMATION
VJ05006- BP 101 B J X - T
DSCC
NUMBER
DIELECTRIC CAPACITANCE
NOMINAL CODE
DC VOLTAGE
RATING1) CAPACITANCE
TOLERANCE
TERMINATION GROUP C TESTING
OPTION
PA CK A G I NG
CASE
CODE
0805
BP
BR
BX
Expressed in
picofarads (pF).
The first two
digits are
significant, the
third is a
multiplier. An
“R” indicates a
decimal point.
Examples:
101 = 100 pF
1R8 = 1.8 pF
X = 10 V
Y = 16 V
Z = 25 V
A = 50 V
B = 100 V
C = 200 V
C = ± 0.25 pF
D = ± 0.5 pF
F = ± 1 %
G = ± 2 %
H = ± 3 %
J = ± 5 %
K = ± 10 %
M = ± 20 %
NOTE:
C, D < 10 pF
F, G , H ≥ 10 pF
J, K, M ≥ 10 pF
(BP, BR, BX)
M = AgPd
Z = Ni barrier with
tin/lead plate min. 4 %
lead
U = Base
metallization-barrier
metal-solder coated
(tin/lead alloy,with a
minimum of 4 % lead).
Solder has a melting
point of + 200 °C or less.
Solder coat thickness is
a minimum of 69
microinches.
C = Full Group C
L = 2000 hrs. life test only
M = 1000 hrs. life test
only
H = Low voltage humidity
test only
- = Group A test only
T = 7" Reel Plastic tape
C = 7" Reel Paper tape
J = 7" Reel (low quantity)
R = 11 1/4" Reel Plastic tape
P = 11 1/4" Reel Paper tape
B = Bulk
Available
RoHS
COMPLIANT