Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductor's system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore (_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please email any questions regarding the system integration to Fairchild_questions@onsemi.com. ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. FODM452, FODM453 5-Pin Mini Flat Package High Speed Transistor Optocoupler Features Description Compact 5-pin mini flat package VDE0884 recognized (File # 136480) The FODM452 and FODM453 optocouplers consist of an AlGaAs LED optically coupled to a high speed photodetector transistor. The devices are housed in a compact 5-pin mini flat package for optimum mounting density. The FODM453 features a high CMR rating for optimum common mode transient immunity. - Ordering option V, e.g., FODM452V 260C reflow capability for Pb-free assembly Related Resources High speed-1 MBit/s Superior CMR-15kV/s at VCM = 1500V (FODM453) Performance guaranteed over temperature (0-70C) U.L. recognized (File # E90700) www.fairchildsemi.com/products/opto/ Applications www.fairchildsemi.com/pf/FO/FODM611.html Line receivers www.fairchildsemi.com/pf/FO/FODM8061.html Pulse transformer replacement www.fairchildsemi.com/pf/FO/FODM8071.html Output interface to CMOS-LSTTL-TTL Wide bandwidth analog coupling Functional Schematic Truth Table ANODE 1 6 VCC 5 VO CATHODE 3 (c)2003 Fairchild Semiconductor Corporation FODM452, FODM453 Rev. 1.0.5 LED Output Off High On Low 4 GND www.fairchildsemi.com FODM452, FODM453 -- 5-Pin Mini Flat Package High Speed Transistor Optocoupler July 2010 Number Name Function Description 1 ANODE 3 CATHODE Anode 4 GND Output Ground 5 VO Output Voltage 6 VCC Output Supply Voltage Cathode Safety and Insulation Ratings for Mini-Flat Package (SO5 Pin) As per IEC60747-5-2 (Pending Certification). This optocoupler is suitable for "safe electrical insulation" only within the safety limit data. Compliance with the safety ratings shall be ensured by means of protective circuits. Symbol Parameter Min. Typ. Max. Unit Installation Classifications per DIN VDE 0110/1.89 Table 1 For rated main voltage < 150Vrms I-IV For rated main voltage < 300Vrms I-III Climatic Classification 40/85/21 Pollution Degree (DIN VDE 0110/1.89) 2 CTI Comparative Tracking Index 175 VPR Input to Output Test Voltage, Method b, VIORM x 1.875 = VPR, 100% Production Test with tm = 1 sec, Partial Discharge < 5 pC 1060 VPR Input to Output Test Voltage, Method a, VIORM x 1.5 = VPR, Type and Sample Test with tm = 60 sec, Partial Discharge < 5 pC 848 Max Working Insulation Voltage 565 Vpeak Highest Allowable Over Voltage 4000 Vpeak 5.0 mm VIORM VIOTM External Creepage TCase RIO External Clearance 5.0 mm Insulation thickness 0.5 mm Safety Limit Values, Maximum Values allowed in the event of a failure, Case Temperature 150 C Insulation Resistance at TS, VIO = 500V 109 (c)2003 Fairchild Semiconductor Corporation FODM452, FODM453 Rev. 1.0.5 www.fairchildsemi.com 2 FODM452, FODM453 -- 5-Pin Mini Flat Package High Speed Transistor Optocoupler Pin Definitions Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol Value Units TSTG Storage Temperature Parameter -40 to +125 C TOPR Operating Temperature -40 to +85 C EMITTER IF (avg) DC/Average Forward Input Current 25 mA IF (pk) Peak Forward Input Current (50% duty cycle, 1ms P.W.) 50 mA Peak Transient Input Current (1s P.W., 300pps) 1.0 A IF (trans) VR Reverse Input Voltage 5 V PD Input Power Dissipation (No derating required over specified operating temp range) 45 mW Average Output Current 8 mA DETECTOR IO (avg) IO (pk) 16 mA VCC Supply Voltage Peak Output Current -0.5 to 30 V VO Output Voltage -0.5 to 20 V PD Output Power Dissipation (No derating required over specified operating temp range) 100 mW (c)2003 Fairchild Semiconductor Corporation FODM452, FODM453 Rev. 1.0.5 www.fairchildsemi.com 3 FODM452, FODM453 -- 5-Pin Mini Flat Package High Speed Transistor Optocoupler Absolute Maximum Ratings (TA = 25C unless otherwise noted) Individual Component Characteristics Symbol Parameter Test Conditions Min. Typ.* Max. Unit 1.60 1.7 V EMITTER VF Input Forward Voltage IF = 16mA, TA = 25C IF = 16mA BVR VF /TA 1.8 Input Reverse Breakdown Voltage IR = 10A Temperature Coefficient of Forward Voltage IF = 16mA 5.0 -1.8 V Logic High Output Current IF = 0mA, VO = VCC = 5.5V, TA =25C .001 IF = 0 mA, VO = VCC = 15V, TA =25C .001 mV/C DETECTOR IOH IF = 0mA, VO = VCC = 15V 0.5 A 1 50 ICCL Logic Low Supply Current IF = 16mA, VO = Open, VCC = 15V 100 200 A ICCH Logic high supply current IF = 0 mA, VO = Open, VCC = 15V, TA = 25C 0.05 1 A IF = 0mA, VO = Open, VCC = 15V 2 Transfer Characteristics Symbol Parameter Test Conditions Min. Typ.* Max Unit 50 % IF = 16mA, IO = 3mA, VCC = 4.5V, TA =2 5C 0.4 V IF = 16mA, IO = 2.4mA, VCC = 4.5 V 0.5 COUPLED CTR VOL Current Transfer Ratio(1) Logic LOW Output Voltage IF = 16mA, VCC = 4.5V TA = 25C VOL=0.4V 20 VOL=0.5V 15 Switching Characteristics (VCC = 5V) Symbol TPHL TPLH |CMH| |CML| BW Parameter Test Conditions Device Min. Typ.* Max. Unit 0.8 s 1.0 s 0.8 s 1.0 s Propagation Delay Time to Logic LOW RL = 1.9k, IF = 16mA, TA = 25C (Fig. 9) 0.40 Propagation Delay Time to Logic HIGH RL = 1.9k, IF = 16mA, TA = 25C(2) (Fig. 9) 0.35 Common Mode Transient Immunity at Logic HIGH IF = 0mA, VCM = 10VP-P, RL = 1.9k, TA = 25C(3) (Fig. 10) FODM452 5 15 KV/s IF = 0mA, VCM = 1500VP-P, RL = 1.9k TA = 25C(3) (Fig. 10) FODM453 15 40 KV/s Common Mode Transient Immunity at Logic LOW IF = 16mA, VCM = 10VP-P, RL = 1.9k, TA = 25C(3) (Fig. 10) FODM452 5 15 KV/s IF = 16mA, VCM = 1500VP-P, RL = 1.9k, TA = 25C(3) (Fig. 10) FODM453 15 40 KV/s Bandwidth RL = 100 3 MHz RL = 1.9k, IF = 16mA RL = 1.9k, IF = 16mA (2) (2) (2) (Fig. 9) (Fig. 9) Isolation Characteristics Symbol VISO CI-O Characteristics Withstand Insulation Test Voltage Capacitance (Input to Output) Test Conditions RH 50%, TA = 25C, t = 1 min. f = 1MHz (4) Min. (4) Typ.* 3750 Max. Unit VRMS 0.2 pF *All Typicals at TA = 25C (c)2003 Fairchild Semiconductor Corporation FODM452, FODM453 Rev. 1.0.5 www.fairchildsemi.com 4 FODM452, FODM453 -- 5-Pin Mini Flat Package High Speed Transistor Optocoupler Electrical Characteristics (TA = 0 to 70C unless otherwise specified) 2. The 1.9k load represents 1 TTL unit load of 1.6mA and 5.6k pull-up resistor. 3. Common mode transient immunity in logic high level is the maximum tolerable (positive) dVcm /dt on the leading edge of the common mode pulse signal VCM, to assure that the output will remain in a logic high state (i.e., VO > 2.0V). Common mode transient immunity in logic low level is the maximum tolerable (negative) dVcm /dt on the trailing edge of the common mode pulse signal, VCM, to assure that the output will remain in a logic low state (i.e., VO < 0.8V). 4. Device is considered a two terminal device: Pins 1, and 3 are shorted together and Pins 4, 5, and 6 are shorted together. (c)2003 Fairchild Semiconductor Corporation FODM452, FODM453 Rev. 1.0.5 www.fairchildsemi.com 5 FODM452, FODM453 -- 5-Pin Mini Flat Package High Speed Transistor Optocoupler Notes: 1. Current Transfer Ratio is defined as a ratio of output collector current, IO, to the forward LED input current, IF, times 100%. Fig. 1 Input Forward Current vs Forward Voltage Fig. 2 Normalized Current Transfer Ratio vs. Input Current NORMALIZED CURRENT TRANSFER RATIO 100 IF - FORWARD CURRENT (mA) TA = 25C 10 1 0.1 0.01 0.001 1.20 VO = 0.4V VCC = 5V TA = 25C Normalized to IF = 16mA 1.15 1.10 1.05 1.00 0.95 0.90 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1 10 VF - FORWARD CURRENT (mA) I F - INPUT CURRENT (mA) Fig. 4 Logic High Output Current vs. Ambient Temperature 1.6 IOH - LOGIC HIGH OUTPUT CURRENT (nA) NORMALIZED CURRENT TRANSFER RATIO Fig. 3 Normalized Current Transfer Ratio vs. Ambient Temperature IF = 16mA VO = 0.4V VCC = 5V Normalized to TA = 25C 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 -40 -20 0 20 40 60 80 VO = VCC = 5V IF = 0V 10 1 0.1 -40 100 -20 0 40 60 80 100 Fig. 6 Propagation Delay vs. Load Resistance Fig. 5 DC and Pulsed Transfer Characteristics 10 14 TA = 25C VCC = 5V tP - PROPAGATION DELAY (s) TA = 25C VCC = 5V 12 IO - OUTPUT CURRENT (mA) 20 TA - TEMPERATURE (C) TA - AMBIENT TEMPERATURE IF = 40mA 35mA 10 30mA 8 25mA 20mA 6 15mA 4 10mA IF = 16mA IF = 10mA tPLH 1 tPHL 5mA 2 0 0 2 4 6 8 10 12 14 0.1 16 1 VO - OUTPUT VOLTAGE (V) (c)2003 Fairchild Semiconductor Corporation FODM452, FODM453 Rev. 1.0.5 2 3 4 5 6 7 8 9 10 RL - LOAD RESISTANCE (k) www.fairchildsemi.com 6 FODM452, FODM453 -- 5-Pin Mini Flat Package High Speed Transistor Optocoupler Typical Performance Curves Fig. 8 Frequency Response Fig. 7 Propagation Delay vs. Ambient Temperature 1400 5 NORMALIZED RESPONSE (dB) tP - PROPAGATION DELAY (ns) IF = 16mA VCC = 5V TA = 25C IF = 16mA VCC = 5V RL = 1.9k 1200 1000 800 600 tPHL 400 tPLH RL = 220 0 RL = 100 -5 RL = 470 -10 RL = 1k 200 -15 0.01 0 -40 -20 0 20 40 60 80 100 TA - AMBIENT TEMPERATURE (C) (c)2003 Fairchild Semiconductor Corporation FODM452, FODM453 Rev. 1.0.5 0.1 1 10 f - FREQUENCY (MHz) www.fairchildsemi.com 7 FODM452, FODM453 -- 5-Pin Mini Flat Package High Speed Transistor Optocoupler Typical Performance Curves (Continued) Noise Shield + 1 6 5 VCC FODM452, FODM453 -- 5-Pin Mini Flat Package High Speed Transistor Optocoupler Pulse Generator I F tr = 5ns Z O = 50 10% D.C. I/f < 100s +5 V RL VO VO 0.1 F 3 I F Monitor 4 C L = 1.5 F GND Rm IF 0 5V VO 1.5 V 1.5 V VOL TPHL TPLH Fig. 9 Switching Time Test Circuit IF Noise Shield + 1 6 A 5 B VCC +5 V RL VO VO 0.1 F VFF 3 4 + GND - VCM - Pulse Gen VCM 10 V 0V 90% 90% 10% 10% tr tf VO 5V Switch at A : IF = 0 mA VO VOL Switch at A : IF = 16 mA Fig. 10 Common Mode Immunity Test Circuit (c)2003 Fairchild Semiconductor Corporation FODM452, FODM453 Rev. 1.0.5 www.fairchildsemi.com 8 FODM452, FODM453 -- 5-Pin Mini Flat Package High Speed Transistor Optocoupler Package Dimensions Notes: 1. No standard applies to this package. 2. All dimensions are in millimeters. 3. Dimensions are exclusive of burrs, mold flash, and tie bar extrusion. 4. Drawings filesname and revision: MKT-MFP05A. Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild's worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor's online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ (c)2003 Fairchild Semiconductor Corporation FODM452, FODM453 Rev. 1.0.5 www.fairchildsemi.com 9 FODM452, FODM453 -- 5-Pin Mini Flat Package High Speed Transistor Optocoupler Footprint Drawing for PCB Layout 0.61 1.27 1.27 1.27 Device `A' Device `B' 5.05 7.95 Pin 1 Pin 1 1.45 2.54 End Stacking Configuration Dimensions in millimeters (c)2003 Fairchild Semiconductor Corporation FODM452, FODM453 Rev. 1.0.5 Unutilized Solder Pad www.fairchildsemi.com 10 K0 P2 P0 t D0 E A0 W1 W B0 d F D1 P 2.54 Pitch Symbol Dimensions (mm) Tape Width W 12.00 +0.30 / -0.10 Tape Thickness t 0.30 0.05 Sprocket Hole Pitch P0 4.00 0.10 Sprocket Hole Diameter Description D0 1.50 +0.10 / -0.0 Sprocket Hole Location E 1.75 0.10 Pocket Location F 5.50 0.10 P2 2.00 0.10 Pocket Pitch P 8.00 0.10 Pocket Dimension A0 4.40 0.10 Pocket Hole Diameter B0 7.30 0.10 K0 2.30 0.10 D1 1.50 Min. Cover Tape Width W1 Cover Tape Thickness d Max. Component Rotation or Tilt 10 Max. Devices Per Reel 2500 Reel Diameter (c)2003 Fairchild Semiconductor Corporation FODM452, FODM453 Rev. 1.0.5 9.20 0.065 0.010 330mm (13") www.fairchildsemi.com 11 FODM452, FODM453 -- 5-Pin Mini Flat Package High Speed Transistor Optocoupler Tape and Reel Dimensions FODM452, FODM453 -- 5-Pin Mini Flat Package High Speed Transistor Optocoupler Ordering Information Option Order Entry Identifier (example) R2 FODM452R2 V FODM452V R2V FODM452R2V Description Tape and Reel (2500 per reel) IEC60747-5-2 IEC60747-5-2, Tape and Reel (2500 per reel) Marking Information 1 V 3 M452 2 X YY M 6 4 5 Definitions 1 Fairchild logo 2 Device number 3 IEC60747-5-2 mark (Note: Only appears on parts ordered with VDE option - See order entry table) 4 One digit year code, e.g., `7' 5 Two digit work week ranging from `01' to `53' 6 Assembly package code (c)2003 Fairchild Semiconductor Corporation FODM452, FODM453 Rev. 1.0.5 www.fairchildsemi.com 12 FODM452, FODM453 -- 5-Pin Mini Flat Package High Speed Transistor Optocoupler Reflow Profile Temperature (C) TP 260 240 TL 220 200 180 160 140 120 100 80 60 40 20 0 Max. Ramp-up Rate = 3C/S Max. Ramp-down Rate = 6C/S tP Tsmax tL Preheat Area Tsmin ts 120 240 360 Time 25C to Peak Time (seconds) Profile Freature Pb-Free Assembly Profile Temperature Min. (Tsmin) 150C Temperature Max. (Tsmax) 200C Time (tS) from (Tsmin to Tsmax) 60-120 seconds Ramp-up Rate (tL to tP) 3C/second max. Liquidous Temperature (TL) 217C Time (tL) Maintained Above (TL) 60-150 seconds Peak Body Package Temperature 260C +0C / -5C Time (tP) within 5C of 260C 30 seconds Ramp-down Rate (TP to TL) 6C/second max. Time 25C to Peak Temperature (c)2003 Fairchild Semiconductor Corporation FODM452, FODM453 Rev. 1.0.5 8 minutes max. www.fairchildsemi.com 13 TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks. F-PFS FRFET(R) SM Global Power Resource GreenBridge Green FPS Green FPS e-Series Gmax GTO IntelliMAX ISOPLANAR Making Small Speakers Sound Louder and BetterTM MegaBuck MICROCOUPLER MicroFET MicroPak MicroPak2 MillerDrive MotionMax MotionGrid(R) MTi(R) MTx(R) MVN(R) mWSaver(R) OptoHiT OPTOLOGIC(R) AccuPower AttitudeEngineTM Awinda(R) AX-CAP(R)* BitSiC Build it Now CorePLUS CorePOWER CROSSVOLT CTL Current Transfer Logic DEUXPEED(R) Dual CoolTM EcoSPARK(R) EfficientMax ESBC (R) (R) Fairchild Fairchild Semiconductor(R) FACT Quiet Series FACT(R) FastvCore FETBench FPS OPTOPLANAR(R) (R) Power Supply WebDesigner PowerTrench(R) PowerXSTM Programmable Active Droop QFET(R) QS Quiet Series RapidConfigure Saving our world, 1mW/W/kW at a timeTM SignalWise SmartMax SMART START Solutions for Your Success SPM(R) STEALTH SuperFET(R) SuperSOT-3 SuperSOT-6 SuperSOT-8 SupreMOS(R) SyncFET Sync-LockTM (R)* TinyBoost(R) TinyBuck(R) TinyCalc TinyLogic(R) TINYOPTO TinyPower TinyPWM TinyWire TranSiC TriFault Detect TRUECURRENT(R)* SerDes UHC(R) Ultra FRFET UniFET VCX VisualMax VoltagePlus XSTM XsensTM TM * Trademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. TO OBTAIN THE LATEST, MOST UP-TO-DATE DATASHEET AND PRODUCT INFORMATION, VISIT OUR WEBSITE AT HTTP://WWW.FAIRCHILDSEMI.COM. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD'S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. AUTHORIZED USE Unless otherwise specified in this data sheet, this product is a standard commercial product and is not intended for use in applications that require extraordinary levels of quality and reliability. This product may not be used in the following applications, unless specifically approved in writing by a Fairchild officer: (1) automotive or other transportation, (2) military/aerospace, (3) any safety critical application - including life critical medical equipment - where the failure of the Fairchild product reasonably would be expected to result in personal injury, death or property damage. Customer's use of this product is subject to agreement of this Authorized Use policy. In the event of an unauthorized use of Fairchild's product, Fairchild accepts no liability in the event of product failure. In other respects, this product shall be subject to Fairchild's Worldwide Terms and Conditions of Sale, unless a separate agreement has been signed by both Parties. ANTI-COUNTERFEITING POLICY Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com, under Terms of Use Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed applications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Advance Information Formative / In Design Preliminary First Production No Identification Needed Full Production Obsolete Not In Production Definition Datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The datasheet is for reference information only. Rev. I76 (c) Fairchild Semiconductor Corporation www.fairchildsemi.com ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com (c) Semiconductor Components Industries, LLC N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 www.onsemi.com 1 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative www.onsemi.com