Crimp 1.0mm MIH CONNECTOR Emboss Tape Compression type pitch Features ------------------------ * Compact Projected area is only 2.0 x 2.8mm, with 1.8mm height. * High contact pressure Despite its smallness, the contact provides contact pressure of 0.7N per circuit thanks to the curled spring design, giving stable contact performance even under conditions of vibration. * Heat resisting design suitable for surface mounting The housing is made of highly heat resisting resin to allow reflow soldering. * Emboss taping for automatic mounting The MIH connector is supplied in the form of emboss taping for automatic mounting. Compression type connector developed for compact equipment such as mobile phone. Specifications ------------------- * Current rating: 0.5A DC * Voltage rating: 20V DC * Temperature range: -25C to +85C (including temperature rise in applying electrical current) * Contact resistance: Initial value/30m max. After environmental testing/50m max. * Insulation resistance: 1,000M min. * Withstanding voltage: 100V AC/minute * Compliant with RoHS. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. 1 MIH CONNECTOR Contact ----------------------------------------------------------------- Model No. 2.0 1.0 2.8 0.5 (0.5) (1.8) MIH-2-412-TF Material and Finish Q'ty / reel Contact: Beryllium copper alloy, nickel-undercoated, gold-plated Housing: Glass-filled LCP, UL94V-0, black 6,000 1.8 RoHS compliance PC board layout (viewed from component side) and Assembly layout ------------- 1.00.1 2.8 Note: 1. Tolerances are non-cumulative: 0.1mm for all centers. 2. The dimensions above should serve as a guideline. Contact JST for details. 2 1.8 2.50.1 0.9+0.3 0 (0.5) 0.7+0.3 0