General Purpose, Pulse and DC Transient Suppression F622 Series Metallized Polyester Film, 5 mm Lead Spacing, 50 - 630 VDC Overview Applications The F622 Series is constructed of metallized stacked polyester film capacitor with radial leads of tinned wire. Radial leads are electrically welded to the contact metal layer on the ends of the capacitor winding. The capacitor is encapsulated in a self-extinguishing material meeting the requirements of UL 94 V-0. Typical applications include high performance, high temperature blocking, coupling, decoupling, bypassing and interference suppression in low voltage applications such as automotive. Not for use with the mains. Benefits * * * * * * * * * Voltage range: 50 - 630 VDC Capacitance range: 0.001 - 2.2 F Lead spacing: 5 mm Capacitance tolerance: 10%, 20%, 5% on request Climatic category: 55/125/56 Tape and reel packaging in accordance with IEC 60286-2 RoHS Compliant and lead-free terminations Operating temperature range of -55C to +125C Designed for high performance, high temperature applications Click image above for interactive 3D content Open PDF in Adobe Reader for full functionality Part Number System F 622 J F 104 M 050 C Capacitor Class Series Lead Spacing (mm) Size Code Capacitance Code (pF) Capacitance Tolerance Rated Voltage (VDC) Packaging F = Film Metallized Polyester First two digits represent significant figures. Third digit specifies number of zeros. J = 5% K = 10% M = 20% 050 = 50 063 = 63 100 = 100 250 = 250 400 = 400 500 = 500 630 = 630 J=5 See Dimension Table See Ordering Options Table One world. One KEMET (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com F3066_F622 * 9/22/2016 1 Film Capacitors - General Purpose, Pulse and DC Transient Suppression F622 Series Metallized Polyester Film, 5 mm Lead Spacing, 50 - 630 VDC Ordering Options Table Lead Spacing Nominal (mm) Type of Leads and Packaging Lead Length (mm) Lead and Packaging Code 4 +2/-0 17 +0/-1 H0= 18.5 +/-0.5 C A L 20 +5/-0 ALL0L H0= 18.5 +/-0.5 R Standard Lead and Packaging Options Bulk (Bag) - Short Leads Bulk (Bag) - Long Leads Tape & Reel (Standard Reel) 5 Other Lead and Packaging Options Bulk (Bag) - Max Length Leads Ammo Pack Dimensions - Millimeters FRONT VIEW SIDE VIEW L B H d 0.5 LL p Size Code JF JG JM JQ JT p B H L d Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance 5.0 5.0 5.0 5.0 5.0 +/-0.4 +/-0.4 +/-0.4 +/-0.4 +/-0.4 2.5 3.5 4.5 5.0 6.0 Maximum Maximum Maximum Maximum Maximum 6.5 7.5 9.5 10.0 11.0 Maximum Maximum Maximum Maximum Maximum 7.2 7.2 7.2 7.2 7.2 Maximum Maximum Maximum Maximum Maximum 0.5 0.5 0.5 0.5 0.5 +/-0.05 +/-0.05 +/-0.05 +/-0.05 +/-0.05 Note: See Ordering Options Table for lead length (LL) options. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com F3066_F622 * 9/22/2016 2 Film Capacitors - General Purpose, Pulse and DC Transient Suppression F622 Series Metallized Polyester Film, 5 mm Lead Spacing, 50 - 630 VDC Performance Characteristics Capacitance Tolerance Category Temperature Range Voltage Derating Rated Temperature 20%, 10%, 5% on request -55C to 125C Above +85C DC and AC voltage derating is 1.25%/C +85C -55 to +125C Climatic Category Average relative humidity 75% RH = 95% for 30 days per year RH = 85% for further days limited by average value per year Test Voltage Capacitance Drift 1.6 x VR VDC for 2 seconds Maximum 3% after a 2 year storage period at a temperature of +10C to +40C and a relative humidity of 40% to 60% Operational life > 200,000 hours Reliability Failure rate < 3 FIT, T = +40C, V = 0.5 x VR Failure criteria: open circuit, short circuit, cap change > 10%, DF 2 times the catalog limits, IR < 50 M Maximum Pulse Steepness Temperature Coefficient Self Inductance dV/dt according to Table 1. For peak to peak voltages lower than rated voltage (Vpp < VR), the specified dV/dt can be multiplied by the factor VR /Vpp. +400 (200) ppm/C at 1 kHz Approximately 6 nH/cm for the total length of capacitor winding and the leads Maximum Values at +23C Dissipation Factor tan C 0.1 F 0.1 F < C 1.0 F C > 1.0 F 1 kHz 0.8% 0.8% 0.8% 10 kHz 1.2% 1.2% 1.5% 100 kHz 2.5% Measured at +20C, according to IEC 60384-2 Minimum Values Between Terminals Insulation Resistance C 0.33 F C > 0.33 F and < 1 F C > 1.0 F VR 100 VDC 15,000 M 5,000 M * F 1,000 M * F VR > 100 VDC 30,000 M 10,000 M * F (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com F3066_F622 * 9/22/2016 3 Film Capacitors - General Purpose, Pulse and DC Transient Suppression F622 Series Metallized Polyester Film, 5 mm Lead Spacing, 50 - 630 VDC Maximum Voltage (Vrms) vs. Frequency (Sinusoidal Waveform/T 40C) Lead Spacing 5 mm (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com F3066_F622 * 9/22/2016 4 Film Capacitors - General Purpose, Pulse and DC Transient Suppression F622 Series Metallized Polyester Film, 5 mm Lead Spacing, 50 - 630 VDC Maximum Current (Irms) vs. Frequency (Sinusoidal Waveform/T 40C) Lead Spacing 5 mm (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com F3066_F622 * 9/22/2016 5 Film Capacitors - General Purpose, Pulse and DC Transient Suppression F622 Series Metallized Polyester Film, 5 mm Lead Spacing, 50 - 630 VDC Environmental Test Data Damp Heat Test Test Conditions Test Criteria Endurance Test T = +40C, RH = 93%, t = 56 days C/C 5% tan 0.005 (1 kHz) IR after test 0.5 x IR minimum Test Conditions Test Criteria T = +100C, U = 1.25 x (0.8 x UR) t = 2,000 hours C/C 5% tan 0.005 (1 kHz) tan 0.010 (100 kHz) IR after test 0.5 x IR minimum Environmental Compliance All KEMET MKT capacitors are RoHS Compliant and Halogen Free. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com F3066_F622 * 9/22/2016 6 Film Capacitors - General Purpose, Pulse and DC Transient Suppression F622 Series Metallized Polyester Film, 5 mm Lead Spacing, 50 - 630 VDC Table 1 - Ratings & Part Number Reference VDC VAC Capacitance Value (F) Size Code 50 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 30 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 2.2 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 0.0047 0.0056 0.0068 0.0082 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.0010 0.0012 0.0015 0.0018 0.0022 0.0027 0.0033 0.0039 0.0047 0.0056 0.0068 0.082 0.010 0.012 0.015 0.018 0.022 0.027 VDC VAC Capacitance Value (F) Max Dimensions in mm Lead Spacing (p) dV/dt (V/s) Part Number 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 200 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 F622JT225(1)050(2) F622JF104(1)063(2) F622JF124(1)063(2) F622JF154(1)063(2) F622JF184(1)063(2) F622JF224(1)063(2) F622JG274(1)063(2) F622JG334(1)063(2) F622JG394(1)063(2) F622JG474(1)063(2) F622JM564(1)063(2) F622JM684(1)063(2) F622JM824(1)063(2) F622JQ105(1)063(2) F622JT125(1)063(2) F622JT155(1)063(2) F622JF472(1)100(2) F622JF562(1)100(2) F622JF682(1)100(2) F622JF822(1)100(2) F622JF103(1)100(2) F622JF123(1)100(2) F622JF153(1)100(2) F622JF183(1)100(2) F622JF223(1)100(2) F622JF273(1)100(2) F622JF333(1)100(2) F622JF393(1)100(2) F622JF473(1)100(2) F622JF563(1)100(2) F622JF683(1)100(2) F622JG823(1)100(2) F622JG104(1)100(2) F622JM124(1)100(2) F622JM154(1)100(2) F622JM184(1)100(2) F622JQ224(1)100(2) F622JT274(1)100(2) F622JT334(1)100(2) F622JT394(1)100(2) F622JT474(1)100(2) F622JF102(1)250(2) F622JF122(1)250(2) F622JF152(1)250(2) F622JF182(1)250(2) F622JF222(1)250(2) F622JF272(1)250(2) F622JF332(1)250(2) F622JF392(1)250(2) F622JF472(1)250(2) F622JF562(1)250(2) F622JF682(1)250(2) F622JF823(1)250(2) F622JF103(1)250(2) F622JF123(1)250(2) F622JF153(1)250(2) F622JF183(1)250(2) F622JG223(1)250(2) F622JG273(1)250(2) L (mm) Lead Spacing (p) dV/dt (V/s) Part Number B H L JT JF JF JF JF JF JG JG JG JG JM JM JM JQ JT JT JF JF JF JF JF JF JF JF JF JF JF JF JF JF JF JG JG JM JM JM JQ JT JT JT JT JF JF JF JF JF JF JF JF JF JF JF JF JF JF JF JF JG JG 6.0 2.5 2.5 2.5 2.5 2.5 3.5 3.5 3.5 3.5 4.5 4.5 4.5 5.0 6.0 6.0 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 3.5 3.5 4.5 4.5 4.5 5.0 6.0 6.0 6.0 6.0 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 3.5 3.5 11.0 6.5 6.5 6.5 6.5 6.5 7.5 7.5 7.5 7.5 9.5 9.5 9.5 10.0 11.0 11.0 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 7.5 7.5 9.5 9.5 9.5 10.0 11.0 11.0 11.0 11.0 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 7.5 7.5 Size Code B (mm) H (mm) (1) K = 10%, M = 20%, J = 5% on request. (2) Insert lead and packaging code. See table for available options. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com F3066_F622 * 9/22/2016 7 Film Capacitors - General Purpose, Pulse and DC Transient Suppression F622 Series Metallized Polyester Film, 5 mm Lead Spacing, 50 - 630 VDC Table 1 - Ratings & Part Number Reference cont'd VDC VAC Capacitance Value (F) Size Code 250 250 250 250 250 250 250 250 250 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 630 630 630 630 630 630 630 630 630 630 630 630 630 160 160 160 160 160 160 160 160 160 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 0.033 0.039 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.0010 0.0012 0.0015 0.0018 0.0022 0.0027 0.0033 0.0039 0.0047 0.0056 0.0068 0.0082 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.0010 0.0012 0.0015 0.0018 0.0022 0.0027 0.0033 0.0039 0.0047 0.0056 0.0068 0.0082 0.010 0.012 0.015 0.0010 0.0012 0.0015 0.0018 0.0022 0.0027 0.0033 0.0039 0.0047 0.0056 0.0068 0.0082 0.010 VDC VAC Capacitance Value (F) Max Dimensions in mm Lead Spacing (p) dV/dt (V/s) Part Number 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 400 400 400 400 400 400 400 400 400 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 800 800 800 800 800 800 800 800 800 800 800 800 800 F622JG333(1)250(2) F622JG393(1)250(2) F622JM473(1)250(2) F622JM563(1)250(2) F622JM683(1)250(2) F622JM823(1)250(2) F622JQ104(1)250(2) F622JT124(1)250(2) F622JT154(1)250(2) F622JF102(1)400(2) F622JF122(1)400(2) F622JF152(1)400(2) F622JF182(1)400(2) F622JF222(1)400(2) F622JF272(1)400(2) F622JF332(1)400(2) F622JF392(1)400(2) F622JF472(1)400(2) F622JG562(1)400(2) F622JG682(1)400(2) F622JG822(1)400(2) F622JG103(1)400(2) F622JG123(1)400(2) F622JG153(1)400(2) F622JM183(1)400(2) F622JM223(1)400(2) F622JM273(1)400(2) F622JQ333(1)400(2) F622JQ393(1)400(2) F622JT473(1)400(2) F622JT563(1)400(2) F622JF102(1)500(2) F622JF122(1)500(2) F622JF152(1)500(2) F622JF182(1)500(2) F622JG222(1)500(2) F622JG272(1)500(2) F622JG332(1)500(2) F622JG392(1)500(2) F622JG472(1)500(2) F622JM562(1)500(2) F622JM682(1)500(2) F622JM822(1)500(2) F622JQ103(1)500(2) F622JT123(1)500(2) F622JT153(1)500(2) F622JF102(1)630(2) F622JF122(1)630(2) F622JG152(1)630(2) F622JG182(1)630(2) F622JG222(1)630(2) F622JG272(1)630(2) F622JM332(1)630(2) F622JM392(1)630(2) F622JM472(1)630(2) F622JM562(1)630(2) F622JQ682(1)630(2) F622JT822(1)630(2) F622JT103(1)630(2) L (mm) Lead Spacing (p) dV/dt (V/s) Part Number B H L JG JG JM JM JM JM JQ JT JT JF JF JF JF JF JF JF JF JF JG JG JG JG JG JG JM JM JM JQ JQ JT JT JF JF JF JF JG JG JG JG JG JM JM JM JQ JT JT JF JF JG JG JG JG JM JM JM JM JQ JT JT 3.5 3.5 4.5 4.5 4.5 4.5 5.0 6.0 6.0 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 3.5 3.5 3.5 3.5 3.5 3.5 4.5 4.5 4.5 5.0 5.0 6.0 6.0 2.5 2.5 2.5 2.5 3.5 3.5 3.5 3.5 3.5 4.5 4.5 4.5 5.0 6.0 6.0 2.5 2.5 3.5 3.5 3.5 3.5 4.5 4.5 4.5 4.5 5.0 6.0 6.0 7.5 7.5 9.5 9.5 9.5 9.5 10.0 11.0 11.0 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 7.5 7.5 7.5 7.5 7.5 7.5 9.5 9.5 9.5 10.0 10.0 11.0 11.0 6.5 6.5 6.5 6.5 7.5 7.5 7.5 7.5 7.5 9.5 9.5 9.5 10.0 11.0 11.0 6.5 6.5 7.5 7.5 7.5 7.5 9.5 9.5 9.5 9.5 10.0 11 11 Size Code B (mm) H (mm) (1) K = 10%, M = 20%, J = 5% on request. (2) Insert lead and packaging code. See table for available options. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com F3066_F622 * 9/22/2016 8 Film Capacitors - General Purpose, Pulse and DC Transient Suppression F622 Series Metallized Polyester Film, 5 mm Lead Spacing, 50 - 630 VDC Soldering Process The implementation of the RoHS directive has resulted in the selection of SnAgCu (SAC) alloys or SnCu alloys as primary solder. This has increased the liquidus temperature from that of 183C for SnPb eutectic alloy to 217 - 221C for the new alloys. As a result, the heat stress to the components, even in wave soldering, has increased considerably due to higher pre-heat and wave temperatures. Polypropylene capacitors are especially sensitive to heat (the melting point of polypropylene is 160 - 170C). Wave soldering can be destructive, especially for mechanically small polypropylene capacitors (with lead spacing of 5 mm to 15 mm), and great care has to be taken during soldering. The recommended solder profiles from KEMET should be used. Please consult KEMET with any questions. In general, the wave soldering curve from IEC Publication 61760-1 Edition 2 serves as a solid guideline for successful soldering. Please see Figure 1. Reflow soldering is not recommended for through-hole film capacitors. Exposing capacitors to a soldering profile in excess of the above the recommended limits may result to degradation or permanent damage to the capacitors. Do not place the polypropylene capacitor through an adhesive curing oven to cure resin for surface mount components. Insert through-hole parts after the curing of surface mount parts. Consult KEMET to discuss the actual temperature profile in the oven, if through-hole components must pass through the adhesive curing process. A maximum two soldering cycles is recommended. Please allow time for the capacitor surface temperature to return to a normal temperature before the second soldering cycle. Manual Soldering Recommendations Wave Soldering Recommendations 300 Following is the recommendation for manual soldering with a soldering iron. 2+3s max 260C 250 First wave Temperature (C) Recommended Soldering Temperature Soldering iron bit temperature (deg C) 400 350 300 Second wave 200 Cooling T <150C Preheating 150 ca 2C/s ca 3.5C/s typical Tpreheat 100 ca 5C/s 115C max 100C 250 200 Typical 50 150 0 100 0 40 80 120 160 200 240 Time (s) 50 0 0 1 2 3 4 5 6 7 8 Soldering time (sec) The soldering iron tip temperature should be set at 350C (+10C maximum) with the soldering duration not to exceed more than 3 seconds. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com F3066_F622 * 9/22/2016 9 Film Capacitors - General Purpose, Pulse and DC Transient Suppression F622 Series Metallized Polyester Film, 5 mm Lead Spacing, 50 - 630 VDC Soldering Process cont'd Wave Soldering Recommendations cont'd 1. The table indicates the maximum set-up temperature of the soldering process Figure 1 Dielectric Film Material Maximum Preheat Temperature Maximum Peak Soldering Temperature Capacitor Capacitor Capacitor Capacitor Capacitor Pitch Pitch Pitch Pitch Pitch 10 mm = 15 mm > 15 mm 15 mm > 15 mm Polyester 130C 130C 130C 270C 270C Polypropylene 100C 110C 130C 260C 270C Paper 130C 130C 140C 270C 270C Polyphenylene Sulphide 150C 150C 160C 270C 270C 2. The maximum temperature measured inside the capacitor: Set the temperature so that inside the element the maximum temperature is below the limit: Dielectric Film Material Maximum temperature measured inside the element Polyester 160C Polypropylene 110C Paper 160C Polyphenylene sulphide 160C Temperature monitored inside the capacitor. Selective Soldering Recommendations Selective dip soldering is a variation of reflow soldering. In this method, the printed circuit board with through-hole components to be soldered is preheated and transported over the solder bath as in normal flow soldering without touching the solder. When the board is over the bath, it is stopped and pre-designed solder pots are lifted from the bath with molten solder only at the places of the selected components, and pressed against the lower surface of the board to solder the components. The temperature profile for selective soldering is similar to the double wave flow soldering outlined in this document, however, instead of two baths, there is only one bath with a time from 3 to 10 seconds. In selective soldering, the risk of overheating is greater than in double wave flow soldering, and great care must be taken so that the parts are not overheated. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com F3066_F622 * 9/22/2016 10 Film Capacitors - General Purpose, Pulse and DC Transient Suppression F622 Series Metallized Polyester Film, 5 mm Lead Spacing, 50 - 630 VDC Construction Stacked Molded Plastic Case Detailed Cross Section Molded Plastic Case Single-sided Metallized Polyester Film Self-Extinguish(First Layer) ing Resin Single-sided Metallized Polyester Film (Second Layer) Margin Metal Contact Layer Metal Contact Layer Leads (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com F3066_F622 * 9/22/2016 11 Film Capacitors - General Purpose, Pulse and DC Transient Suppression F622 Series Metallized Polyester Film, 5 mm Lead Spacing, 50 - 630 VDC Marking FRONT TOP KEMET Logo Series Manufacturing Date Code Capacitance Capacitance Tolerance Voltage Code Packaging Quantities Size Code Lead Spacing JF JG JM JQ JT JU 5 Thickness (mm) Height (mm) Length (mm) 2.5 3.5 4.5 5.0 6 7.2 6.5 7.5 9.5 10.0 11 13 7.2 7.2 7.2 7.2 7.2 7.2 Bulk Bulk Standard Reel Short Leads Long Leads o 355 mm 3000 2000 1500 1000 2000 1500 (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com 4000 3000 2000 1500 1000 750 2500 1800 1400 1200 1000 800 Ammo 3500 2500 1900 1700 1400 1150 F3066_F622 * 9/22/2016 12 Film Capacitors - General Purpose, Pulse and DC Transient Suppression F622 Series Metallized Polyester Film, 5 mm Lead Spacing, 50 - 630 VDC Lead Taping & Packaging (IEC 60286-2) Lead Spacing 5 mm Lead Spacing 7.5 mm 0 0 Lead Spacing 22.5 - 27.5 mm Lead Spacing 10 - 15 mm 0 0 Taping Specification Dimensions in mm Standard IEC 60286-2 Lead spacing +6/-0.1 F 5 7.5 10 15 22.5 27.5 Carrier tape width +1/-0.5 W 18 18 18 18 18 18 Minimum W0 6 6 9 10 10 10 Position of sprocket hole +/-0.5 W1 9 9 9 9 9 9 9+0.75/-0.5 Distance between tapes Maximum W2 3 3 3 3 3 3 3 Sprocket hole diameter +/-0.2 D0 4 4 4 4 4 4 4 Hold-down tape width 18 12.7 12.7 12.7 12.7 12.7 12.7 12.7 +/-0.7 P1 3.85 3.75 7.7 5.2 7.8 5.3 P1 Maximum p 1.3 1.3 1.3 1.3 1.3 1.3 1.3 +/-2 h 2 2 2 2 2 2 2 Total thickness +/-0.2 t 0.7 0.7 0.7 0.7 0.9MAX 0.9MAX 0.9MAX Sprocket hole/cap body +/-0.5 H0 Feed hole lead spacing Distance lead - feed hole Deviation tape - plane Lateral deviation +/-0.2 (1) P0 F +1/-0.5 (3) (2) 18.5 +/-0.5 18.5 +/-0.5 18.5 +/-0.5 18.5 +/-0.5 18.5 +/-0.5 18.5 +/-0.5 18+2/-0 (1) Maximum cumulative feed hole error, 1 mm per 20 parts. (2) 16.5 mm available on request. (3) 15 mm available on request (F 10 mm). (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com F3066_F622 * 9/22/2016 13 Film Capacitors - General Purpose, Pulse and DC Transient Suppression F622 Series Metallized Polyester Film, 5 mm Lead Spacing, 50 - 630 VDC Lead Taping & Packaging (IEC 60286-2) cont'd Ammo Specifications Dimensions (mm) Series R4x, R4x+R, R7x, RSB F5A, F5B, F5D F6xx, F8xx PHExxx, PMExxx, PMRxxx H W T 360 340 59 330 330 50 H T Reel Specifications W Dimensions (mm) Series R4x, R4x+R, R7x, RSB F5A, F5B, F5D F6xx, F8xx PHExxx, PMExxx, PMRxxx D H W 355 500 30 25 55 (Max) 360 500 30 46 (Max) D Manufacturing Date Code (IEC-60062) H W Y = Year, Z = Month Year 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 Code M N P R S T U V W X A B C D E F H J K L M Month January February March April May June July August September October November December Code 1 2 3 4 5 6 7 8 9 O N D (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com F3066_F622 * 9/22/2016 14 Film Capacitors - General Purpose, Pulse and DC Transient Suppression F622 Series Metallized Polyester Film, 5 mm Lead Spacing, 50 - 630 VDC KEMET Electronic Corporation Sales Offices For a complete list of our global sales offices, please visit www.kemet.com/sales. Disclaimer All product specifications, statements, information and data (collectively, the "Information") in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation's ("KEMET") knowledge of typical operating conditions for such applications, but are not intended to constitute - and KEMET specifically disclaims - any warranty concerning suitability for a specific customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET's products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. KEMET is a registered trademark of KEMET Electronics Corporation. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com F3066_F622 * 9/22/2016 15