Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
SP-Cap/ Conductive Polymer Aluminum Capacitors (Specialty Polymer Aluminum Capacitors)
– EEF-11 –
W2
W1
L
P
W2
P
H
+
–
Cap. Polarity bar (Positive)
W.V. codeLot No.
W1
L
+
P1
W2
W2
P4
H
P2
P3 P1
–
+
–
■ Features
● Super Low-ESR (3 mΩ)
● High temperature refl ow soldering applicable
(Peak : 260 °C 10s, main heating : 230 °C 40s)
● RoHS directive compliant
Surface Mount Type
Series: G
■ Speci cations
Category Temp. Range –40 °C to +105 °C
Rated W.V.Range 2 V.DC to 2.5 V.DC
Nominal Cap.Range 330 μF to 560 μF
Capacitance Tolerance ±20 % (120 Hz/+20 °C)
DC Leakage Cur rent I < 0.1 CV (μA) 2 minutes
tan d< 0.06 (120 Hz/+20 °C)
Surge Voltage Rated Working Voltage × 1.25 (15 °C to 35 °C)
Endurance
After applying rated working voltage for 1000 hours at 105 °C±2 °C, and then being stabilized at +20 °C,
capacitor shall meet the following limits.
Capacitance change ±10% of initial measured value
tan d< Initial specifi ed value
DC leakage cur rent < Initial specifi ed value
Moisture resistance
After storing for 500 hours at 60 °C, 90 %
Capacitance change of
initial measurd val ue
2 V.DC
+70, –20 %
tan d< 200 % of initial specifi ed value
DC leakage current < Initial specifi ed value
L±0.2 W1±0.2 W2±0.1 H±0.1 P±0.3
7.3 4.3 2.4 1.9 1.3
(Unit : mm)
■ Di men sions in mm(not to scale)
✽ Externals of fi gure are the reference.
(Unit : mm)
✽ Externals of fi gure are the reference.
L±0.2 W1±0.2 W2±0.1 H±0.1 P1±0.3 P2±0.1 P3±0.2 P4±0.2
7.3 4.3 2.4 1.9 1.3 1.1 0.7 1.4
■ Marking
2 terminals 3 terminals
00 Nov. 2012