Pd t
Ctl
RtIf
Your Com
p
lete Part Number is: PLC30M1B00
Instructions:
1. To change an option, simply click on the step below and make a new selection. This
page will be updated to reflect the new part number, then follow step 2.
2. To submit, click "Save selection to MY LIST" located at the bottom of the
p
a
g
e.
Dimensions are in inches (millimeters) and are subject to change
Package Size
PLC 3 rows of size 16 contacts
Contact variants: 09, 12, 18, 24, 30.
PLCH=high conductivity contacts for higher current ratings
Connector Variant
"FACE VIEW OF
MALE OR REAR
VIEW OF FEMALE" 30 Thirty size 16 contacts
PLC - 18 amp each
Contact Gender M Male Contacts
Contact
Termination
1 Removable contact, panel mounted connector for connection
system 8, order contacts separately. View contact selection after
completing part number. For high conductivity contact connector,
order PL* connectors and MC/FC112N(2)S high conductivity
contacts.
Mounting Style B Metal, 90° mounting bracket
Hoods and Panel
Mount Access. 0 No added accessories
Contact Plating 0 Contacts ordered separately for removable contact style
connector. View contact selection after viewing part number.
Additional Options No additional options required
Your Completed Part Number is PLC30M1B00
Re
q
uest
q
uotes/sam
p
les/catalo
g
s b
y
clickin
g
below:
Pa
g
e 1 of 1Com
p
leted Part Number for PCS Series
5/10/2006file://I:\bittin
g
\CF
_
PROCESS\CPR\tm
p
\05102006
_
1\POSI\Com
p
leted Part Number for PCS Series.htm
Specify Complete Connector By Following Steps 1 Through 8
Insert “0”When Step Is Not Used
1 2 3 4 5 6
PLB 06 F 3 N 0 A1
78
STEP 1 - Basic Series
STEP 2 - Connector Variants
STEP 3 - Connector Gender
M-Male
F-Female
STEP 4 - Type of Contact
0 – Order contacts separately for cable connectors for
connection systems 5, 6, 7, 8 and 9.
1– Removable contact, panel mounted connector for
connection system 8. Order contacts separately.
2– Solder, 18 AWG [1.0mm2] max. for panel mount
connector, for connection system 8. Not available
as PL*H.
3– Solder, Straight Printed Board Mount with 0.146 [3.71]
tail extension for connection systems 1, 4 and 6.
32 – Solder, Straight Printed Board Mount with 0.377 [9.58]
tail extension for connection system 3 and systems 1, 4
and 6.
4 – Solder, 90° Printed Board Mount with 0.146 [3.71] tail
extension for connection systems 1, 2 and 5.
42 – Solder, 90° Printed Board Mount with 0.377 [9.58] tail
extension for connection system 3 and systems 1,2 and
5.
63 – Press-fit, compliant Termination Right Angle Printed
Board Mount (Many variants available, contact Technical
Sales)
7– Order contacts separately for cable connectors for con-
nection systems 5, 6, 7, 8 and 9. Ter minating side of
insulator has 0.165 [4.19] ø c’bore for large wire sizes.
8– Removable contact, panel mounted connector for con-
nection system 8. Order contacts separately. Terminating
side of insulator has 0.165 [4.19]
ø c’bore for large wire sizes.
92 – Straight PCB Mount, Press-Fit, length 0.183 [4.65] for
0.093 inch [2.36] thick board.
93 – Straight PCB Mount, Press-Fit, length 0.218 [5.54] for
0.125 inch [3.18] thick board.
STEP 8 - Special Options
See page 22 for sequential mating sys-
tems. Consult factory for other options.
STEP
1 Row – 03, 04, 06, 08
2 Row – 06, 08, 12, 16
3 Row – 09, 12, 18, 24, 30
STEP 7 - Contact Plating for Printed Board
Connectors
0- Crimp Contacts ordered separately.
A1 - Gold flash ov er nic k el on mating end and gold
flash ov er nic kel on termination end.
A2 - Gold flash ov er nic k el on mating end and 0.00020
inch [5.0 microns] solder coat on termination end.
C1 - 0.000030 inch [0.8 microns] gold ov er nic k el on
mating end and 0.000030 inch [0.8 microns] gold
over nick el on termination end.
C2 - 0.000030 inch [0.8 microns] gold ov er nic k el on
mating end and 0.00020 inch [5.0 microns] solder
coated termination end.
STEP 6 - Hoods and Panel Mount
0-None.
5-Top Opening Hood.
6-Panel Mount, quick release.
81 - Panel Mount, fixed for 0.040 [1.02] thick panel.
82 - Panel Mount, fixed for 0.060 [1.52] thick panel.
83 - Panel Mount, fixed for 0.090 [2.29] thick panel.
11 - Blind Mating System for 0.040 [1.02] thick panel.
12 - Blind Mating System for 0.060 [1.52] thick panel.
13 - Blind Mating System for 0.090 [2.29] thick panel.
14 - Blind Mating System for 0.120 [3.05] thick panel.
STEP 5 - Mounting Style
0 - No added accessories.
B-Metal 90° Mounting Bracket.
BN - Metal 90° Mounting Bracket with Push-on Fastener.
B3 - Plastic 90° Mounting Bracket with Cross Bar.
B3N - Plastic 90° Mounting Bracket with Cross Bar and
Push-on Fastener.
N-Push-On Fastener For Straight Printed Board Mount
Connectors
ST2 - Self-tapping screws 2-28 x 0.250 [6.35] length for 0.093
[2.36] thick board.
ST3 - Self-tapping screws 2-28 x 0.312 [7.92] length for 0.125
[3.18] thick board.
* For high conductivity contact connectors, order PL* connectors and *C112N[2]S contacts
PLA - 1 Row
PLAH- 1 Row High conductivity contacts
PLB - 2 Row
PLBH- 2 Row High conductivity contacts
PLC - 3 Row
PLCH- 3 Row High conductivity contacts
DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
Positronic Industries
www.connectpositronic.com PCS_PNSelection_C-014RevC1_9/04
Power Connections Systems
ORDERING INFORMATION – CODE NUMBERING SYSTEM
